No major fixes since RC3 were made, and mostly the security fixes
for the Quark Bootloader were the main driver behind this new QMSI
Release Candidate.
There are no changes to shim drivers at this moment.
JIRA: ZEP-1572
Change-Id: I68d2b0ee90863d3def909de556314bd86712a059
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Move ip porting guide from the subsystem/networking section to the porting
section of the documentation. Tweak the layout of the doc for improved
readable too.
Jira: ZEP-825
Change-Id: I688151f1da8862a783a82bcd4dde654c5178c30f
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Though the SPI_CS_GPIO Kconfig entry (in drivers/spi/Kconfig) has
"select GPIO" specified, we are observing that merely adding
the symbol(SPI_CS_GPIO) in the
defconfig (boards/x86/arduino_101/Kconfig.defconfig)
is triggering unmet direct dependency warnings
(though the build goes through).
Since the defconfig entry(SPI_CS_GPIO) is not selecting
the aforementioned 'select' rule, we add it manually here.
Jira: ZEP-1668
Change-Id: Ida6a0c851462d747e6559bd0c78fa52e1d0f24b5
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is safer because device name can change and
the app does not need to change.
Jira: ZEP-1764
Change-Id: I3c7716fd72e77c99fd29e4e90634c33f47f32e4c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Add pin definitions to enable GPIO cases to run on
Quark D2000.
Add pin definitions to enable GPIO cases to run on
arduino_101_sss.
Change-Id: I97eadb8316b1f80b899b167a01effab815626dae
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
According to ZEP-1717, removing the callback from
the gpio is not enough to disable interruptions.
You also need to call gpio_pin_configure() on
the input pin without the GPIO_INT flag to totally
disable the interrupt for the pin.
This commit will stop level interrupt from being
fired constantly.
Change-Id: I019d7cea0bc0d5e5ff4b74165472ed11de1733bb
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
These were flagged by icx build.
Jira: ZEP-1864
Change-Id: I5b8fce64d9e20d768fabf02e2a799e9390e3679a
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Even deprecated, this target should still work, the issue was
introduced by commit 2bc9d69981.
The problem is that for both of those targets the board's specific
Makefiles should be include'd, it was done only for the non-deprecated
target ('debugserver').
As a note: that is the recommended way of doing a logical OR operation
in Makefiles.
Change-Id: I3ae8f5201c47e65b33a62cea45e25dc2226de489
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Ring buffers provide no concurrency control. Since the ring buffer
is being installed as the system log hook, multiple contexts may try
to write to it simultaneously. Lock interrupts to prevent corruption
of the ring buffer.
- NULL pointers were being passed into sys_ring_buf_get() for the
'type' and 'value' parameters, causing undesirable behavior when they
are dereferenced.
- The 'size32' parameter of sys_ring_buf_put() was being passed the
number of bytes, not the number of 32-bit words.
- The 'size32' parameter of sys_ring_buf_get() was not bring correctly
initialized the size of the destination buffer in terms of 32-bit
words. This has been fixed. There is no longer a need to query the
API twice.
Issue: ZEP-1789
Change-Id: I96f9cc74f3711297727b4c5114b6c93510f4a8c1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Makes configuration for tinyTile board.
Change-Id: I823e299dad905387de85fd6d74159c7540bc7edd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes following warning:
...
warning: format '%u' expects argument of type 'unsigned int', but
argument 6 has type 'int32_t * {aka int *}' [-Wformat=]
...
Change-Id: I3ac523b7c8daf08b0c8e7b43aad270306fe5d744
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable UART_QMSI_0 whenever NBLE is enabled the same way as it is done
for BLUETOOTH_H4.
Change-Id: Ib2f76f7e5e95620d40320891fec1b86509d1856e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
With the default of 192, the x86 rom will span from
0x40010000 - 0x4004000. However the default starting
ROM address for the ARC side is configured to be
0x40034000. If the x86 image is large enough it will
clobber the ARC code. Shorten the x86 side such that
its last flash address is 0x40033FFF.
Change-Id: I23987c3db11f0e51c2405b8baee114aee39de571
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were simply copied from the 'lcd' test case.
Issue: ZEP-1768
Change-Id: Ie5d561c3131b04df2952523cc8dfd5a004dc1960
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add __printf_like attribute to printf style functions in minimal libc to
enable the compiler checking this provides. We fixup the associated
issues that are now found by utilizing these checks.
Change-Id: I74ac0d0345782463d9fb454f7161d6b4af211ba5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Help text in Kconfig files should be indented with <tab><space><space>.
Change-Id: Iefa5c8f4bfe329b4ee754ebfe43766f445432184
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Provide a random driver wrapped around the MCUX TRNG driver.
Change-Id: Icbd7ab587aa18ecbd7eae52290aaa5d8ee504cf2
Origin: Original
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
MCUX contains more than one type of random number generator,
so refrect this in config and file names.
Change-Id: Iba4482a1ae41f35d471686f8b159c113147c4df8
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Fix c6e27a05 was too aggressive. It turns out that bluetooth on the
Quark SE boards won't enable it's own UART, because it had always been
enabled. Apps that don't do it already will be broken.
Enable UART_QMSI_0 whenever BLUETOOTH_H4 is pulled in on this
platform.
Change-Id: I5e21c6004714adba8fb0fafa056dc2d62698a3d1
Issue: ZEP-1788
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Updated supported OSes to Fedora 25 and Ubuntu 16.04 LTS
Updated Zephyr SDK package name to reflect actual name
ZEP-1480
Change-Id: If7d79785009db8eb50028ff664ac7fc26eff79b5
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Provide BUT button and LED1, LED2 leds defines in order to get
basic samples "blinky" and "button" available on olimexino_stm32.
Defines have been named in order to match with board printing.
Aliases are provided to get compatibility with zephyr sample code.
Change-Id: I975dc6c043ea83935fb229cafc737cb3ed80fdc4
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This was flagged by ISSM icx compiler.
JIRA: ZEP-1806
Change-Id: Iebd04febbdce9b92a4d0cae986ca7f84f4da58a0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
It was named 'mutex', which is not representative of what it is used for
since it is not used for mutual exclusion, but rather for signaling.
Change-Id: Icfef0011f890b2546af1686ba6b57e3fc13c6576
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
There is an implicit expectation that the priority of threads spawned by
a ztest suite is still higher than the main suite thread own priority
when a test signals the main suite thread that it has completed.
Change-Id: Id7caec3e9e553712c828a93c212b8e82bd16eabd
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
That was an oversight that should not have caused any problem. However,
the test harness expects the test's thread to be higher prio than the
test suite's thread that spawns it, because the test suite reuses the
stack space for the next test, if there is one.
Change-Id: Iad951118278abf0d9c23012d78ed56b75bc2958a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
rtd theme prevents table headings and content from wrapping and can
cause tables to display to wide. This patch overrides that CSS.
Change-Id: I4885b959a0dd075ff4c8edb9cfb4b17a611e6775
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I61ed7cfd97e20faad8f1e98dacef9384e8fefc73
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device name defined by driver's Kconfig for
device binding, instead of hard-coding it which is not portable.
Jira: ZEP-1764
Change-Id: I0dc9aa2cdf426af71f1ed6dcef1ec7cec19f4c3e
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I7af234ada73302eb062340740df2fc7a8539150d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
tests/kernel/pipe/test_pipe_api:
added test cases to cover k_pipe_block_put.
Also added test case to verify [get, put] API sequence.
Jira: ZEP-1242
Change-Id: I755def474592ea2bf36d8644c8f4a07a7a80bad0
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This reverts commit b3a2fc287b.
The firmware on production board will have a faster Baudrate.
Change-Id: Ifa1abd4c2f882b8ef6e7d9762fc592524177dc48
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Jesus Sanchez-Palencia