RSSI is only applicable for STA mode, as for AP there are multiple
peers. This causes failure and unnecessary delay, so just skip the
retrieval.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user enables AP mode, make sure CONFIG_AP symbol
is enabled so that access point sources get compiled etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA supplicant handle is not used anymore.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This prepares for the upcoming AP mode support and moves re-usable code
to a common helper function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These were missed in the original support.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of assuming that the array is perfectly aligned with enum, moved
to a data driven design, this decouples from the enum numbering and also
helps avoid repetition of the event string while parsing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a implementation gap and shouldn't be exposed to customers.
But when we run with debug it still helps to identify any important
events that are not handled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using "%02x" needs an unsigned integer, but all MAC addresses use
"unsigned char/char" as the data type, so, to avoid warnings, use a
temporary array.
Also, the macro from the WPA supplicant doesn't use the address of the
array element and causes warnings, so re-define the macro with address
of the element.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the WPA supplicant internal event has a MAC address, and the sample
is compiled with newlib-nano then then the parsing fails because of lack
of support for C99 formatting options in nano [1].
Fix this by using supported specifier, even the code that encodes the
message uses the same format specifier.
[1] - https://docs.zephyrproject.org/latest/develop/languages/c/newlib.html#formatted-output
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enabling a network would trigger a scan. Since frequency is being
set after enable_network, first scan is issued without any
specific frequency.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA-PSK was added a bit late, so, it wasn't properly implemented, use
both key management and protocol version to properly handle WPA-PSK in
both connection and also in the status.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
MBO and WMM-AC are mandatory for WFA certification, so cannot be
disabled for memory saving.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
wpa_supplicant has a lot of entries, and it appears in the top-level menu.
Let it be a menuconfig, so that it gets its own menu page with
all the options, instead of expanding in the top-level menu when
selected.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a user provides both band and channel then check if they are
compatible or not.
Also, move the multiple remove network cleanup to goto.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
By default Wi-Fi works on all bands, so, the band will be unknown, in
which case no need to configure a specific frequency list to WPA
supplicant.
Only when a use provides a specific band then this is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows the WPA supplicant to build using the builtin MbedTLS.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a specific band is configured, automatically fetch and configure the
supported channels.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For a memory constrained system, basic Wi-Fi is enough, so, add a
configuration option to compiled out advanced Wi-Fi features.
This also supports choosing individual features if needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This should solve latency issues with using system workqueue and can now
closely implement the configured timeout.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The macro for crypto has been renamed (and as a choice), so, use the
new macro to see if the crypto has been enabled.
Fixes WPA2/WPA3 association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This hardly saves flash but helps us in doing PSA port stagewise,
personal first and then enterprise.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to a bug in Kconfig, both legacy and PSA crypto were enabled
earlier, so, the dependencies for PSA were missed as they were provided
by legacy.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This set of changes introduces an API to set the channel when
the device is working in independent Monitor or TX injection mode
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This set of changes brings in packet filter API for Monitor and
promiscuous mode operation
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This change provides mode setting API to hostap module.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The control interface is initialized on every interface add but only
de-initialized on WPA supplicant termination. This leaks all cleanups in
the control interface dei-init.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enable the PSA key type which enables AES block cipher support.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix PSA dependency on random number support.
Random number generated is wanted, instead of a specific PRNG algorithm.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We need to use PSA MbedTLS template to get entropy working.
Rather than having a single set of options which makes dependency
management tough, have a separate entry for PSA based MbedTLS which
is enabled by for NS variants only.
Also, don't use MbedTLS APIs for entropy, instead use the Zephyr APIs
that can work for both NS and S builds.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The following commits will re-introduce functionality that
the earlier commit removed, so revert the earlier commit.
This reverts commit 64423e269e.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a cmake check to ensure the simulator is new enough and guide
users to update it and rebuild if it isn't,
so they get a better experience than by just getting a build or
runtime error.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This allows the SoC to have total control on what MPU ranges
to be programmed at boot. This overrides the generic ranges
in the architecture core code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With memory domain enabled, all threads within the same domain
have access to each other threads' stacks, especially with
CONFIG_ARCH_MEM_DOMAIN_SYNCHRONOUS_API enabled (as it is
expected behavior). So update the conditions to skip both
tests to read and write to other threads' stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both CONFIG_XTENSA_SYSCALL_USE_HELPER and
CONFIG_XTENSA_INSECURE_USERSPACE are also applicable to MPU.
So move them out of the CPU_HAS_MMU block.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For CPU without THREADPTR, we need an alternative way to figure
out if we are in user context. This extends the user context
check to do that via a brief syscall.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Chaitanya Tata