Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The basic is the same for both architecture, but using different
GPIO controller and pins.
Change-Id: Ie021461858736d90a47bdef2c9d5e655e2efa473
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Excluded from quark_se_ss due to insufficient RAM.
Change-Id: I75bb34c058c7c41d4f3baaf12ca110f23eb531b8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses too much RAM to run on Quark SE, but we now can at least
build it for generic_arc.
Change-Id: Ibdc144303d9d9c2049e4d5d4ec637b1e4778f392
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a sample app to utilize GPIOs on x86 side of
Arduino 101. Refer to the header of source file for
more information.
Change-Id: Ie547618b2c4fb483d85d6458bd68dd2849e1d19d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app which displays an incrementing
counter through the Grove LCD, with changing backlight.
Please refer to the README file on how to setup
the hardware.
Change-Id: I95c0571edaeabb281ee06f3b32fad1ab5b64d924
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize the Fujitsu
MB85RC256V FRAM via I2C on Arduino 101. It does
simple read and write on the chip.
Change-Id: Ie20470f3701acb0e4fa9bc3d7b3676625839cf06
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
clflush and mfence are not supported on `iamcu'
Change-Id: I25b7c582de3b8e2bbea3f219d4655c16763410f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tests errno is retrieved per-thread with fibers and one task.
Change-Id: I0b0890f250a80a30806dc1294944aa42f4209ace
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: I1c225c1b68d94b22ca10423b50a78a0ba09a27a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: Idcc89e6e9f4acc337fafc7d42f8de3061a5ece04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With MVIC these can't be arbitrarily assigned and the vector must be
<irq num> + 0x20.
The correct number of vectors is now set for footprint-min on D2000.
Change-Id: Ibf59921dbc438c7465b7050dd74d0badc9a91fc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This sample creates an alarm and repeats the alarm on every
interrupt.
Change-Id: I97583e3c5af826c51536f8d244c016e2c628e88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Software interrupts or system calls aren't really appropriate for
zephyr, but we have an ongoing need in our test code to run a
function with arguments synchronously in interrupt context.
This patch introduces irq_offload() which allows us to do this without
separate initialization or having to manage fake IRQs in the
interrupt controller.
ARM assembly code contributed by Benjamin Walsh
<benjamin.walsh@windriver.com>
ARC is not yet implemented but will be in a subsequent patch.
irq_test_common.h has been removed and all test cases updated to
use the new API.
Change-Id: I9af99ed31b62bc7eb340e32cf65e3d11354d1ec7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace calls to nano_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3ed2589489d4de3e79cab085122e95dabafe8915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sample suffix is redundant, since we are under samples.
Change-Id: Ifb59007f0c1b156c7bb306506e3b22efc9b993dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following cruft from the nanokernel version of the kernel
event logger sample application:
1. MDEF file
This file is only relevant to microkernel projects.
2. References to advanced power management and tickless idle
These features are only relevant to microkernel projects
Change-Id: Ice9bbf0a3d73c45a9157bd38e0a2703f5915d51d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add configuration files for new platform and adapt options
of the benchmarks for those platforms.
Change-Id: I7c5011966c3a99f0b1c2c3fc44ba05b67ac6f953
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample depends on functions that are not available in
the MVIC driver.
Disabling while we wait for those to be implemented.
Change-Id: Icd03ef014cbcd890945c0e77e349cccfded62e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow tests to be built for this platform.
Change-Id: I2275ec71af6cdb6f71c131fa26c5eae2d91c2475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Anas Nashif