Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to the schematic, SPI1_M_ should be properly mapped out
on the pinmux. This should enable the SPI1_M functionality on the
Arduino / Genuino 101 board now.
Change-Id: Ided0147e7c2d835aa58fdc5860e7ca7f55d9e566
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Updating the pinmux to use a local static table for each pin select
option. Instead moving to a static series of function calls that
move the data from the RAM section to the ROM section.
This impacts only the Quark D2000 and the Quark SE chips. It does
not show any impact to the basic_minuteia tests.
All said we see small changes that amount to some values like:
test platform ram_%_change rom_%_change
======================== ============ ============ ============
microkernel:footprint-max quark_se-x86 -0.01 0.0
microkernel:footprint-reg quark_se-x86 -0.02 -0.01
microkernel:footprint-min quark_se-x86 -0.07 -0.02
nanokernel:footprint-max quark_se-x86 -0.02 -0.01
nanokernel:footprint-max quark_d2000 -0.01 -0.01
nanokernel:footprint-reg quark_se-x86 -0.03 -0.01
nanokernel:footprint-reg quark_d2000 -0.02 -0.02
nanokernel:footprint-min quark_se-x86 0.04 0.01
nanokernel:footprint-min quark_d2000 -0.07 -0.04
Change-Id: Ib69403eced60a8c784887dca9dd1954ce73a3e70
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the Quark SE and Quark D2000 platform are only included
through the use of a compile fence one level higher in the Makefile.
Adding in a secondary compile fence to ensure if that check ever
changes, we won't be in trouble.
Change-Id: I5e39faffb4289f80901c0264a50a3e770db3388a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Initial import of the pinmux configuration for the Quark_D2000 series
boards. Some minor tweaking of default values may be needed depending
upon expected usage scenarios.
Change-Id: I3b22219546a6534c7c695d0917a35f6f46b03cf1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding support for the pinmux pins to set the pullup and input enable
registers. On the Arduino_101 board some pullup pins specifically can
be used to cause a reset for the Arduino sketch being run. Its use on
other pins is currently being investigated.
Change-Id: Id3293a4da84ea5bf553bf62ccb12782cb88503a5
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Naming convention should follow the IP_noun_verb concept. In this case,
renaming several functions from (for example) pinmux_set_pin to
pinmux_pin_set, while also correctly naming the function to their
specific tasks.
This is being done to make way for the ability to change the input
value, pullup value, and the slew as well.
Change-Id: Iec6f1723a48f80b66f3cea44df9bb6925972f6af
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Extending the public interface of the pinmux to allow the end user
to set a pin as an input/output and to pull up the value on
a specified pin.
Change-Id: Ie0a3b6432dd8c7d7a02f32e3d22049bdd99f1410
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This variable (CONFIG_BOARD) will store the textual form of the
platform name and will be used for locating files related to the
board in the source tree.
Change-Id: I3c8a05ed428451a6785799a5492f0dd14682f208
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move SECONDARY init level from essential pseudo-fiber
to the idle task, so the device initialization routines
may use interrupts and wait for interrupts.
Change-Id: I5afa92d8b304de5b295450f0a8a761385b7c2566
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
When an app fail to run, windows show a pop-up with the errors.
To avoid this pop-up we disable this feature by default
Change-Id: If21f3aaf37555052874ee8e29310e955124d2cb0
Signed-off-by: Louise Mendoza <yonattan.a.louise.mendoza@intel.com>
This patch fixes some outdated or invalid comments and adds some
clarification of GATT Discovery procedure.
Change-Id: I91994917bea246a2d112df65123a3e6dec42ee92
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If pairing is rejected due to unsatisfying auth requirements
pending response buffer should be freed.
Change-Id: I8bbdad5fac8cd6dbcd674c7ad9725cf44ef79004
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch introduce new Kconfig option that is used to indicate if
device should operate in Secure Connection Only Mode. Enabling this
option removes support for LE Legacy Pairing.
Change-Id: If224b6786f4c840959fe87a31f0224bc1e21f90e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables generate link key notification event when legacy PIN code
pairing is done well and give possibility to grab the link key for
later connections.
Change-Id: I5e661c203bbebfa8aa931662a479a1b921f7ace9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
When PIN code authentication is requested now there's a way
for user to respond with negative reply.
Change-Id: I800bf535f6ae98ee367393c686d6897f50b5fe8b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to conveniently start passive scan from central
applications.
Change-Id: Idf470be747ab7c6e7413cc368227b0b69e7b78a4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When the BLE GAP service needs to declare the preferred connection
parameters.
Change-Id: Iff8a6f68f2dfe478c44dcc5a3e95abda271ecc00
Signed-off-by: Louis Caron <louis.caron@intel.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Using empty eui64 array resulted in net_set_mac() failure and
address was never set. This used to work only due to
linkaddr_node_addr being being global (and hence zeroed).
Change-Id: Ie21de35a628956c6221b6f1e4c96a1807a1d2804
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no point in trying to connect non connectable device.
Change-Id: I1e3d8486db7cd7ca80f226ec3f4c36ab43f14a1a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This application only connects and disconnects to found devices.
Change-Id: Ic4d5cde52da37a369aa0583ec774c4dd116c6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Asynchronous functions use the parameters to store relevant data even
after the scope it has been called which means they have to remain valid
while the operations are in course.
Change-Id: I2cc79e5ce352fef4e077e9fb4cb0f4d111463d00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure discovery UUID is a static variable so that it remain
valid once the scope changes.
Change-Id: Iaca9ab5d71f51e526dcd8439795e962bb359f9b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces bt_uuid_copy which can be used to copy UUID values.
Change-Id: I22d996bcace454769ac871a43b9acebe8b23db39
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Using number_removed to find out how many packets from unack queue we
need to clear.
Change-Id: Icad948892f3ab1febc939e9ba6d6b3431973633e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We might get out of sync packet because of race collision, drop it.
Change-Id: Ic84a760199df1520dc7a95383972f9ec428c7fde
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enables get basic connection info support for non-LE connections.
Change-Id: If295b552567886256cfc1e215bfe3149d2f1f60c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Unmasks pin code request to be able service
pairing request from legacy 2.0 devices.
Change-Id: I5c09232d8e6e2c7673a35205e0bfeb8c8240388e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves object handling user authentication callback interface exposed
in public API to hci core module and exports internally LE SMP
authentication handlers.
The stack authentication API methods call based on connection type
the correct internal methods. Currently only LE SMP backend
is implemented.
Make getting local io capa in runtime.
Change-Id: I17459096616a620467b4fa01c53fd4bc0b59af9b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Gets included authentication API in BR/EDR variant
Change-Id: I4fa55bb3baa8db79f6e9f5f1c65c0d93f8f8780a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Anas Nashif