OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/stm32f723e_disco/stm32f723e_disco.yaml

17 lines
209 B
YAML
Raw Normal View History

boards: arm: stm32: basic support for STM32F723E-DISCO board This patch adds basic support and documentation for the STM32F723E-DISCO board, with GPIO, USART, I2C and USB support. Two USARTs are enabled, the VCP one for the console and the Arduino one. The GPIOs are configured for the 3 LEDs and the button available on the board. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-06-29 03:52:42 +08:00
identifier: stm32f723e_disco
name: STM32F723EDISCOVERY
type: mcu
arch: arm
toolchain:
- zephyr
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2018-08-03 23:11:23 +08:00
- gnuarmemb
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-10 00:25:16 +08:00
- xtools
boards: stm32f723e_disco: Conform to default configuration guidelines Update stm32f723e_disco configuration to match with default configuration guidelines: -Configure available connectors Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2018-09-14 21:11:12 +08:00
ram: 256
flash: 512
boards: arm: stm32: basic support for STM32F723E-DISCO board This patch adds basic support and documentation for the STM32F723E-DISCO board, with GPIO, USART, I2C and USB support. Two USARTs are enabled, the VCP one for the console and the Arduino one. The GPIOs are configured for the 3 LEDs and the button available on the board. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-06-29 03:52:42 +08:00
supported:
boards: Add arduino_i2c in yaml when supported Update boards yaml file with arduino_i2c supported option We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there are duplicated sensors between the disco_l475_iot1 and shield. Until Zephyr drivers can handle multiple sensors we need to have this exclude. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-16 17:11:53 +08:00
- arduino_i2c
boards: arm: stm32: basic support for STM32F723E-DISCO board This patch adds basic support and documentation for the STM32F723E-DISCO board, with GPIO, USART, I2C and USB support. Two USARTs are enabled, the VCP one for the console and the Arduino one. The GPIOs are configured for the 3 LEDs and the button available on the board. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-06-29 03:52:42 +08:00
- gpio
boards: arm: stm32f723e_disco: enable I2C support Enable the support for the 3 I2C buses of the STM32F723E-DISCO board, connected respectively to the WM8994, the Arduino V3/STMOD+ and the touch panel. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-07-04 04:03:34 +08:00
- i2c
boards: stm32f723e_disco: Conform to default configuration guidelines Update stm32f723e_disco configuration to match with default configuration guidelines: -Configure available connectors Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2018-09-14 21:11:12 +08:00
- spi
boards: arm: stm32f723e_disco: enable USB FS OTG Enable the USB FS OTG at the DTS and pinmux level. Update the documentation accordingly. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-07-04 03:51:21 +08:00
- usb_device