zephyr/boards/arm/stm32f723e_disco/stm32f723e_disco.yaml

identifier: stm32f723e_disco
name: STM32F723EDISCOVERY
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
supported:
  - gpio
  - i2c
  - usb_device
boards: arm: stm32: basic support for STM32F723E-DISCO board This patch adds basic support and documentation for the STM32F723E-DISCO board, with GPIO, USART, I2C and USB support. Two USARTs are enabled, the VCP one for the console and the Arduino one. The GPIOs are configured for the 3 LEDs and the button available on the board. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2018-06-29 03:52:42 +08:00			`identifier: stm32f723e_disco`
			`name: STM32F723EDISCOVERY`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: arm: stm32: basic support for STM32F723E-DISCO board This patch adds basic support and documentation for the STM32F723E-DISCO board, with GPIO, USART, I2C and USB support. Two USARTs are enabled, the VCP one for the console and the Arduino one. The GPIOs are configured for the 3 LEDs and the button available on the board. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2018-06-29 03:52:42 +08:00			`supported:`
			`- gpio`
boards: arm: stm32f723e_disco: enable I2C support Enable the support for the 3 I2C buses of the STM32F723E-DISCO board, connected respectively to the WM8994, the Arduino V3/STMOD+ and the touch panel. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2018-07-04 04:03:34 +08:00			`- i2c`
boards: arm: stm32f723e_disco: enable USB FS OTG Enable the USB FS OTG at the DTS and pinmux level. Update the documentation accordingly. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2018-07-04 03:51:21 +08:00			`- usb_device`