unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2010-2016 Wind River Systems, Inc.
|
|
|
|
*
|
2017-01-19 09:01:01 +08:00
|
|
|
* SPDX-License-Identifier: Apache-2.0
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief fixed-size stack object
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <kernel.h>
|
2016-11-08 23:36:50 +08:00
|
|
|
#include <kernel_structs.h>
|
2016-12-18 02:18:45 +08:00
|
|
|
#include <debug/object_tracing_common.h>
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
#include <toolchain.h>
|
2017-06-17 23:30:47 +08:00
|
|
|
#include <linker/sections.h>
|
2016-10-13 22:31:48 +08:00
|
|
|
#include <ksched.h>
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
#include <wait_q.h>
|
|
|
|
#include <misc/__assert.h>
|
2016-10-20 05:10:46 +08:00
|
|
|
#include <init.h>
|
2017-09-30 07:42:07 +08:00
|
|
|
#include <syscall_handler.h>
|
2016-10-20 05:10:46 +08:00
|
|
|
|
|
|
|
extern struct k_stack _k_stack_list_start[];
|
|
|
|
extern struct k_stack _k_stack_list_end[];
|
|
|
|
|
2016-12-18 19:57:45 +08:00
|
|
|
#ifdef CONFIG_OBJECT_TRACING
|
2016-10-20 05:10:46 +08:00
|
|
|
|
2017-05-18 18:16:45 +08:00
|
|
|
struct k_stack *_trace_list_k_stack;
|
|
|
|
|
2016-10-20 05:10:46 +08:00
|
|
|
/*
|
|
|
|
* Complete initialization of statically defined stacks.
|
|
|
|
*/
|
|
|
|
static int init_stack_module(struct device *dev)
|
|
|
|
{
|
|
|
|
ARG_UNUSED(dev);
|
|
|
|
|
|
|
|
struct k_stack *stack;
|
|
|
|
|
|
|
|
for (stack = _k_stack_list_start; stack < _k_stack_list_end; stack++) {
|
|
|
|
SYS_TRACING_OBJ_INIT(k_stack, stack);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-11-09 03:06:55 +08:00
|
|
|
SYS_INIT(init_stack_module, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_OBJECTS);
|
2016-10-20 05:10:46 +08:00
|
|
|
|
2016-12-18 19:57:45 +08:00
|
|
|
#endif /* CONFIG_OBJECT_TRACING */
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
|
2018-05-03 08:44:39 +08:00
|
|
|
void k_stack_init(struct k_stack *stack, u32_t *buffer,
|
2018-10-15 14:18:51 +08:00
|
|
|
u32_t num_entries)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
{
|
2018-05-11 02:10:34 +08:00
|
|
|
_waitq_init(&stack->wait_q);
|
2018-10-15 14:18:51 +08:00
|
|
|
stack->base = buffer;
|
|
|
|
stack->next = buffer;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
stack->top = stack->base + num_entries;
|
|
|
|
|
|
|
|
SYS_TRACING_OBJ_INIT(k_stack, stack);
|
2017-08-23 04:15:23 +08:00
|
|
|
_k_object_init(stack);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
|
|
|
|
2018-10-15 14:18:51 +08:00
|
|
|
s32_t _impl_k_stack_alloc_init(struct k_stack *stack, u32_t num_entries)
|
2018-05-03 08:44:39 +08:00
|
|
|
{
|
|
|
|
void *buffer;
|
2018-10-15 14:18:51 +08:00
|
|
|
s32_t ret;
|
2018-05-03 08:44:39 +08:00
|
|
|
|
|
|
|
buffer = z_thread_malloc(num_entries);
|
2018-09-21 07:30:45 +08:00
|
|
|
if (buffer != NULL) {
|
2018-05-03 08:44:39 +08:00
|
|
|
k_stack_init(stack, buffer, num_entries);
|
|
|
|
stack->flags = K_STACK_FLAG_ALLOC;
|
2018-10-15 14:18:51 +08:00
|
|
|
ret = (s32_t)0;
|
2018-05-03 08:44:39 +08:00
|
|
|
} else {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-09-30 07:42:07 +08:00
|
|
|
#ifdef CONFIG_USERSPACE
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_SYSCALL_HANDLER(k_stack_alloc_init, stack, num_entries)
|
2017-09-30 07:42:07 +08:00
|
|
|
{
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_OOPS(Z_SYSCALL_OBJ_NEVER_INIT(stack, K_OBJ_STACK));
|
|
|
|
Z_OOPS(Z_SYSCALL_VERIFY(num_entries > 0));
|
2017-09-30 07:42:07 +08:00
|
|
|
|
2018-09-13 14:03:05 +08:00
|
|
|
return _impl_k_stack_alloc_init((struct k_stack *)stack, num_entries);
|
2017-09-30 07:42:07 +08:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-05-03 08:44:39 +08:00
|
|
|
void k_stack_cleanup(struct k_stack *stack)
|
|
|
|
{
|
2018-10-15 14:18:51 +08:00
|
|
|
__ASSERT_NO_MSG(_waitq_head(&stack->wait_q) == NULL);
|
2018-05-03 08:44:39 +08:00
|
|
|
|
2018-10-15 14:18:51 +08:00
|
|
|
if ((stack->flags & K_STACK_FLAG_ALLOC) != (u8_t)0) {
|
2018-05-03 08:44:39 +08:00
|
|
|
k_free(stack->base);
|
|
|
|
stack->base = NULL;
|
|
|
|
stack->flags &= ~K_STACK_FLAG_ALLOC;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-09-30 07:42:07 +08:00
|
|
|
void _impl_k_stack_push(struct k_stack *stack, u32_t data)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
{
|
|
|
|
struct k_thread *first_pending_thread;
|
2018-10-15 14:18:51 +08:00
|
|
|
u32_t key;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
|
|
|
|
__ASSERT(stack->next != stack->top, "stack is full");
|
|
|
|
|
|
|
|
key = irq_lock();
|
|
|
|
|
|
|
|
first_pending_thread = _unpend_first_thread(&stack->wait_q);
|
|
|
|
|
2018-09-21 07:30:45 +08:00
|
|
|
if (first_pending_thread != NULL) {
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
_ready_thread(first_pending_thread);
|
|
|
|
|
|
|
|
_set_thread_return_value_with_data(first_pending_thread,
|
|
|
|
0, (void *)data);
|
2018-04-03 09:24:58 +08:00
|
|
|
_reschedule(key);
|
kernel: Scheduler refactoring: use _reschedule_*() always
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2018-03-27 01:54:40 +08:00
|
|
|
return;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
} else {
|
|
|
|
*(stack->next) = data;
|
|
|
|
stack->next++;
|
kernel: Scheduler refactoring: use _reschedule_*() always
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2018-03-27 01:54:40 +08:00
|
|
|
irq_unlock(key);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2017-09-30 07:42:07 +08:00
|
|
|
#ifdef CONFIG_USERSPACE
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_SYSCALL_HANDLER(k_stack_push, stack_p, data)
|
2017-09-30 07:42:07 +08:00
|
|
|
{
|
|
|
|
struct k_stack *stack = (struct k_stack *)stack_p;
|
|
|
|
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_OOPS(Z_SYSCALL_OBJ(stack, K_OBJ_STACK));
|
|
|
|
Z_OOPS(Z_SYSCALL_VERIFY_MSG(stack->next != stack->top,
|
|
|
|
"stack is full"));
|
2017-09-30 07:42:07 +08:00
|
|
|
|
|
|
|
_impl_k_stack_push(stack, data);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
int _impl_k_stack_pop(struct k_stack *stack, u32_t *data, s32_t timeout)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
{
|
2018-10-15 14:18:51 +08:00
|
|
|
u32_t key;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
int result;
|
|
|
|
|
|
|
|
key = irq_lock();
|
|
|
|
|
|
|
|
if (likely(stack->next > stack->base)) {
|
|
|
|
stack->next--;
|
|
|
|
*data = *(stack->next);
|
|
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (timeout == K_NO_WAIT) {
|
|
|
|
irq_unlock(key);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
2018-03-27 02:58:10 +08:00
|
|
|
result = _pend_current_thread(key, &stack->wait_q, timeout);
|
2018-11-02 11:50:25 +08:00
|
|
|
if (result == -EAGAIN) {
|
2018-09-14 02:43:59 +08:00
|
|
|
return -EAGAIN;
|
2018-11-02 11:50:25 +08:00
|
|
|
}
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
|
2018-09-14 02:43:59 +08:00
|
|
|
*data = (u32_t)_current->base.swap_data;
|
|
|
|
return 0;
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
2017-09-30 07:42:07 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_USERSPACE
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_SYSCALL_HANDLER(k_stack_pop, stack, data, timeout)
|
2017-09-30 07:42:07 +08:00
|
|
|
{
|
2018-05-05 06:57:57 +08:00
|
|
|
Z_OOPS(Z_SYSCALL_OBJ(stack, K_OBJ_STACK));
|
|
|
|
Z_OOPS(Z_SYSCALL_MEMORY_WRITE(data, sizeof(u32_t)));
|
2017-09-30 07:42:07 +08:00
|
|
|
|
|
|
|
return _impl_k_stack_pop((struct k_stack *)stack, (u32_t *)data,
|
|
|
|
timeout);
|
|
|
|
}
|
|
|
|
#endif
|