OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/pinctrl/Kconfig

64 lines
2.1 KiB
Plaintext
Raw Normal View History

drivers: pinctrl: initial skeleton Initial skeleton for pinctrl drivers. This patch includes common infrastructure and API definitions for pinctrl drivers. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-08-10 17:17:46 +08:00
# Copyright (c) 2021 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0
menuconfig PINCTRL
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 19:05:12 +08:00
bool "Pin controller drivers"
drivers: pinctrl: initial skeleton Initial skeleton for pinctrl drivers. This patch includes common infrastructure and API definitions for pinctrl drivers. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-08-10 17:17:46 +08:00
if PINCTRL
drivers: pinctrl: add pinctrl driver for the Xilinx Zynq-7000 Add pinctrl driver for the Xilinx Zynq-7000 series SoCs. Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2022-05-30 21:11:19 +08:00
module = PINCTRL
module-str = PINCTRL
source "subsys/logging/Kconfig.template.log_config"
drivers: pinctrl: initial skeleton Initial skeleton for pinctrl drivers. This patch includes common infrastructure and API definitions for pinctrl drivers. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-08-10 17:17:46 +08:00
config PINCTRL_STORE_REG
bool
help
This option must be selected by drivers that require access to the device
register address. This can happen, for example, if certain pin control
actions are device dependent or require access to device specific
registers
config PINCTRL_NON_STATIC
bool
help
This option can be selected if the pin control configuration defined by
a driver has to be accessed externally. This can happen, for example, when
dynamic pin control is enabled or in testing environments.
drivers: pinctrl: add support for dynamic pin control Add support for dynamic pin control, that is, allow to change device pin configuration at runtime. Because no device de-initialization is available yet, this API has limited usage options, e.g. modify pin configuration at early boot stage (before device driver is initialized) Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-09-13 22:30:58 +08:00
config PINCTRL_DYNAMIC
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 19:05:12 +08:00
bool "Dynamic configuration of pins"
drivers: pinctrl: add support for dynamic pin control Add support for dynamic pin control, that is, allow to change device pin configuration at runtime. Because no device de-initialization is available yet, this API has limited usage options, e.g. modify pin configuration at early boot stage (before device driver is initialized) Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-09-13 22:30:58 +08:00
select PINCTRL_NON_STATIC
help
When this option is enabled pin control configuration can be changed at
runtime. This can be useful, for example, to change the pins assigned to a
peripheral at early boot stages depending on a certain input.
drivers: pinctrl: introduce new Telink B91 Pinctrl driver Pinctrl driver basic support for Telink B91 platform. Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
2022-02-11 20:09:30 +08:00
source "drivers/pinctrl/Kconfig.b91"
drivers: pinctrl: gd32: initial support for AF based SoCs Add a pin control driver for GD32 SoCs using the AF model. Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
2021-11-02 04:37:04 +08:00
source "drivers/pinctrl/Kconfig.gd32"
ITE: drviers/pinctrl: Add pinctrl driver for IT8XXX2 Add pinctrl driver for ITE IT8XXX2. Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
2022-01-07 11:01:07 +08:00
source "drivers/pinctrl/Kconfig.it8xxx2"
drivers: pinctrl: npcx: add initial pin-controller driver This CL is the initial version for npcx pinctrl driver and introduces pinctrl nodes for both IO-pads and peripheral devices for each npcx series. Users can set pin configuration via these nodes in the board layout DT file. It also wraps all configurations related to pin-muxing in pinctrl_soc.h. Regarding the other pin properties, we will implement them later. Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
2022-02-21 17:19:31 +08:00
source "drivers/pinctrl/Kconfig.npcx"
drivers: pinctrl: add numicro pinctrl driver This commit adds a pinctrl driver for the Nuvoton NuMicro family of processors. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2022-09-24 01:21:39 +08:00
source "drivers/pinctrl/Kconfig.numicro"
drivers: pinctrl: nrf: initial support Add initial support for nRF pin controller driver. The implementation in this patch does not yet support any peripheral. Only states representation and basic driver functionality is introduced. Note: The nrf_pin_configure function has been marked as __unused since it may not be used in certain scenarios until all peripherals are supported by the pinctrl driver. For example, if only UART/E is supported but the board does not enable UART, the function will never get called. However, that board will likely have other peripherals that will gain support in the future. Thanks to Marti Bolivar for bindings documentation. Co-authored-by: Marti Bolivar <marti.bolivar@nordicsemi.no> Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-08-10 17:22:31 +08:00
source "drivers/pinctrl/Kconfig.nrf"
drivers: pinctrl: add Renesas RCar PFC driver Introduce Pin Function Controller for Renesas R-Car family. This first implementation support to set a given pin as gpio or peripheral (GPSR), to set a peripheral function to a pin (IPSR), to set pull-up, pull-down (PUEN, PUD). In addition this driver allows to set driving capabilies(DRVCTRL). Pins are identified thanks to the per SoC binding for pin definition which also contains pin alternate function parameters. Some pins can also have driving capabilities, some have bias capabilities. In order to find the correct bias and drive registers pfc_r8a77951.c describes the different registers. Each SoCs or package will need to define getters for these registers: pfc_rcar_get_bias_regs() and pfc_rcar_get_drive_regs(). Signed-off-by: Julien Massot <julien.massot@iot.bzh>
2021-12-03 21:22:01 +08:00
source "drivers/pinctrl/Kconfig.rcar"
drivers: pinctrl: Added pinctrl driver for RPi Pico Added a pinctrl driver for the Raspberry Pi Pico series Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
2021-11-30 06:29:09 +08:00
source "drivers/pinctrl/Kconfig.rpi_pico"
drivers: pinctrl: Update atmel sam driver to new api This update current Atmel sam pinctrl initiative to current Zephyr pinctrl API. It update current devicetree bindings and add the sam pinctrl driver. Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2022-03-11 08:56:45 +08:00
source "drivers/pinctrl/Kconfig.sam"
drivers: pinctrl: Update Atmel sam0 driver to new API This update current Atmel sam0 pinctrl initiative to current Zephyr pinctrl API. It update current devicetree bindings and add the sam0 pinctrl driver. Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2022-03-11 09:41:29 +08:00
source "drivers/pinctrl/Kconfig.sam0"
drivers: pinctrl: stm32: initial version Add initial version for STM32 pinctrl driver. Driver has been written re-using many of the already existing parts in drivers/pinmux/pinmux_stm32.c. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-09-06 20:33:46 +08:00
source "drivers/pinctrl/Kconfig.stm32"
drivers: pinctrl: Add kinetis pinctrl driver Add kinetis pinctrl driver. Driver initializes clocks for each port, and exposes the pinctrl_configure_pins function required for pinctrl support. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-02-22 02:54:05 +08:00
source "drivers/pinctrl/Kconfig.kinetis"
drivers: pinctrl: Microchip MEC172x pinctrl driver Add core files for Microchip MEC172x pinctrl driver Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
2022-01-21 03:51:01 +08:00
source "drivers/pinctrl/Kconfig.xec"
drivers: pinctrl: refactor pin control support for imx rt Refactor iMX RT pin control support to use more generic names, as the IOMUXC peripheral is present on non RT iMX application cores. Additionally, make selection of the pin control driver occur at the SOC level. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-04-26 05:30:58 +08:00
source "drivers/pinctrl/Kconfig.imx"
drivers: pinctrl: add SiFive pinctrl driver Add a pinctrl driver used in FE310-based boards. Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
2022-03-22 16:19:34 +08:00
source "drivers/pinctrl/Kconfig.sifive"
drivers: pinctrl: Add LPC IOCON pinctrl driver Add lpc iocon pinctrl driver. Driver handles IOCON clock initialization as well as IOCON pin configuration Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2022-03-05 04:31:23 +08:00
source "drivers/pinctrl/Kconfig.lpc_iocon"
drivers: pinctrl: add CC13XX/CC26XX pinctrl driver Add pinctrl driver for CC13XX/CC26XX family of SoCs to facilitate transition from pinmux to pinctrl. `IOCPortConfigureSet()` from TI hal driverlib used to implement the generic pinctrl driver. Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
2022-04-15 18:22:17 +08:00
source "drivers/pinctrl/Kconfig.cc13xx_cc26xx"
drivers: pinctrl: esp32: initial support add initial pinctrl driver support for ESP32. Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
2022-01-31 06:08:04 +08:00
source "drivers/pinctrl/Kconfig.esp32"
drivers: pinctrl: add OpenISA RV32M1 pinctrl driver Add OpenISA RV32M1 pinctrl driver. Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2022-05-02 04:28:29 +08:00
source "drivers/pinctrl/Kconfig.rv32m1"
drivers: pinctrl: Add Infineon CAT1 Pin controller driver Added initial version of Infineon CAT1 Pin controller driver. Added initial version of binding file for Infineon CAT1 Pinctrl driver. Added initial version of dt header for Infineon CAT1 pinctrl driver. Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
2023-02-23 20:04:53 +08:00
source "drivers/pinctrl/Kconfig.ifx_cat1"
drivers: pinctrl: add pinctrl driver for the Xilinx Zynq-7000 Add pinctrl driver for the Xilinx Zynq-7000 series SoCs. Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2022-05-30 21:11:19 +08:00
source "drivers/pinctrl/Kconfig.xlnx"
drivers: pinctrl: Add driver for smartbond This adds pinctrl driver for Renesas SmartBond(tm) MCU family. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
2022-07-11 19:35:49 +08:00
source "drivers/pinctrl/Kconfig.smartbond"
drivers: pinctrl: Add pinctrl driver for xmc4xxx Add pinctrl driver for infineon xmc4xxx devices. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
2022-07-14 22:01:23 +08:00
source "drivers/pinctrl/Kconfig.xmc4xxx"
drivers: pinctrl: rename S32 to NXP S32 Following updates previously done for other drivers, rename all occurrences of S32 to NXP S32 to avoid ambiguity. Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
2022-12-27 22:50:06 +08:00
source "drivers/pinctrl/Kconfig.nxp_s32"
drivers: pinctrl: Add Silabs Gecko pin controller This commit adds initial support for gecko pinctrl driver Co-authored-by: Mateusz Sierszulski <msierszulski@antmicro.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
2022-09-07 17:00:47 +08:00
source "drivers/pinctrl/Kconfig.gecko"
drivers: pinctrl: Add pinctrl support for TI K3 devices K3 is a common architecture used between different TI processor families Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
2023-02-28 08:00:46 +08:00
source "drivers/pinctrl/Kconfig.ti_k3"
drivers: pinctrl: gd32: initial support for AF based SoCs Add a pin control driver for GD32 SoCs using the AF model. Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
2021-11-02 04:37:04 +08:00
drivers: pinctrl: initial skeleton Initial skeleton for pinctrl drivers. This patch includes common infrastructure and API definitions for pinctrl drivers. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-08-10 17:17:46 +08:00
endif # PINCTRL