# Copyright (c) 2021 Nordic Semiconductor ASA # SPDX-License-Identifier: Apache-2.0 menuconfig PINCTRL bool "Pin controller drivers" if PINCTRL module = PINCTRL module-str = PINCTRL source "subsys/logging/Kconfig.template.log_config" config PINCTRL_STORE_REG bool help This option must be selected by drivers that require access to the device register address. This can happen, for example, if certain pin control actions are device dependent or require access to device specific registers config PINCTRL_NON_STATIC bool help This option can be selected if the pin control configuration defined by a driver has to be accessed externally. This can happen, for example, when dynamic pin control is enabled or in testing environments. config PINCTRL_DYNAMIC bool "Dynamic configuration of pins" select PINCTRL_NON_STATIC help When this option is enabled pin control configuration can be changed at runtime. This can be useful, for example, to change the pins assigned to a peripheral at early boot stages depending on a certain input. source "drivers/pinctrl/Kconfig.b91" source "drivers/pinctrl/Kconfig.gd32" source "drivers/pinctrl/Kconfig.it8xxx2" source "drivers/pinctrl/Kconfig.npcx" source "drivers/pinctrl/Kconfig.numicro" source "drivers/pinctrl/Kconfig.nrf" source "drivers/pinctrl/Kconfig.rcar" source "drivers/pinctrl/Kconfig.rpi_pico" source "drivers/pinctrl/Kconfig.sam" source "drivers/pinctrl/Kconfig.sam0" source "drivers/pinctrl/Kconfig.stm32" source "drivers/pinctrl/Kconfig.kinetis" source "drivers/pinctrl/Kconfig.xec" source "drivers/pinctrl/Kconfig.imx" source "drivers/pinctrl/Kconfig.sifive" source "drivers/pinctrl/Kconfig.lpc_iocon" source "drivers/pinctrl/Kconfig.cc13xx_cc26xx" source "drivers/pinctrl/Kconfig.esp32" source "drivers/pinctrl/Kconfig.rv32m1" source "drivers/pinctrl/Kconfig.ifx_cat1" source "drivers/pinctrl/Kconfig.xlnx" source "drivers/pinctrl/Kconfig.smartbond" source "drivers/pinctrl/Kconfig.xmc4xxx" source "drivers/pinctrl/Kconfig.nxp_s32" source "drivers/pinctrl/Kconfig.gecko" source "drivers/pinctrl/Kconfig.ti_k3" endif # PINCTRL