OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/mimxrt1050_evk/mimxrt1050_evk.yaml

20 lines
243 B
YAML
Raw Normal View History

boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-08-12 03:46:04 +08:00
#
# Copyright (c) 2017, NXP
#
# SPDX-License-Identifier: Apache-2.0
#
identifier: mimxrt1050_evk
name: NXP MIMXRT1050-EVK
type: mcu
arch: arm
toolchain:
- zephyr
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2018-08-03 23:11:23 +08:00
- gnuarmemb
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-01-10 00:25:16 +08:00
- xtools
boards: Add "ram" and "flash" properties for a number of boards Currently, it seems that only boards with smaller amount of RAM get a value for "ram" property, and very few boards have "flash" defined. However, to test bigger sample applications, it's helpful to have these properties universally defined. Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2018-03-14 05:40:40 +08:00
ram: 128
flash: 128
mimxrt1050_evk: Configure an lpspi instance and pins Enables an instance of the lpspi peripheral, configures the pinmuxes, and updates the board documentation accordingly. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-15 05:23:27 +08:00
supported:
- spi
mimxrt1050_evk: enabling networking hardware Enables Networking hardware on i.MX-RT 1050-EVKB board. Pinout enabled board specific etherenet connection, also pin initialization was moved later to PRE_KERNEL_2 in order to have sysclock initialized before. Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
2018-11-16 00:28:47 +08:00
- netif:eth