zephyr/boards/arm/mimxrt1050_evk/mimxrt1050_evk.yaml

#
# Copyright (c) 2017, NXP
#
# SPDX-License-Identifier: Apache-2.0
#

identifier: mimxrt1050_evk
name: NXP MIMXRT1050-EVK
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
ram: 128
flash: 128
supported:
  - spi
boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com> 2017-08-12 03:46:04 +08:00			`#`
			`# Copyright (c) 2017, NXP`
			`#`
			`# SPDX-License-Identifier: Apache-2.0`
			`#`

			`identifier: mimxrt1050_evk`
			`name: NXP MIMXRT1050-EVK`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: Add "ram" and "flash" properties for a number of boards Currently, it seems that only boards with smaller amount of RAM get a value for "ram" property, and very few boards have "flash" defined. However, to test bigger sample applications, it's helpful to have these properties universally defined. Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org> 2018-03-14 05:40:40 +08:00			`ram: 128`
			`flash: 128`
mimxrt1050_evk: Configure an lpspi instance and pins Enables an instance of the lpspi peripheral, configures the pinmuxes, and updates the board documentation accordingly. Signed-off-by: Maureen Helm <maureen.helm@nxp.com> 2018-09-15 05:23:27 +08:00			`supported:`
			`- spi`