OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/sensor/CMakeLists.txt

50 lines
2.3 KiB
CMake
Raw Normal View History

drivers: sensors: adt7420: Add driver for ADT7420 Temperature Sensor This patch adds support for the Analog Devices ADT7420 High-Accuracy 16-bit Digital I2C Temperature Sensors. Optionally sensor threshold events are supported. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2018-07-09 23:48:09 +08:00
add_subdirectory_ifdef(CONFIG_ADT7420 adt7420)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_ADXL362 adxl362)
drivers: sensors: adxl372: Add driver for ADXL372 high-g accelerometer This patch adds support for the Analog Devices ADXL372 ultra-low power, 3-axis, +/-200 g MEMS accelerometer. The ADXL372 can be either connected via a SPI or I2C interface. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2018-08-01 16:45:59 +08:00
add_subdirectory_ifdef(CONFIG_ADXL372 adxl372)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_AK8975 ak8975)
drivers: sensors: add driver for amg88xx sensor This patch adds the driver for Panasonic AMG88xx infrared array sensor. The driver was developed within the framework of a student internship in the development department. The task of the student was to implement the trigger part of the driver, transfer and visualization of the measured data. Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-09-25 23:38:33 +08:00
add_subdirectory_ifdef(CONFIG_AMG88XX amg88xx)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_APDS9960 apds9960)
add_subdirectory_ifdef(CONFIG_BMA280 bma280)
add_subdirectory_ifdef(CONFIG_BMC150_MAGN bmc150_magn)
add_subdirectory_ifdef(CONFIG_BME280 bme280)
add_subdirectory_ifdef(CONFIG_BMG160 bmg160)
add_subdirectory_ifdef(CONFIG_BMI160 bmi160)
drivers: sensor: Add missing cmake files for bmm150 The bmm150 sensor driver was missed in the conversion from kbuild to cmake. This problem was found when updating the build_all tests to include missing sensor drivers. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:34:24 +08:00
add_subdirectory_ifdef(CONFIG_BMM150 bmm150)
drivers: sensor: Add support for CCS811 Digital Gas Sensor Add support for AMS CCS811 Digital Gas Sensor for monitoring indoor air quality. This sensor reports the following parameters: 1. Co2 concentration 2. VOC concentration 3. Sensor voltage 4. Sensor current This driver only supports polling mode as of now. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-01-06 00:09:05 +08:00
add_subdirectory_ifdef(CONFIG_CCS811 ccs811)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_DHT dht)
add_subdirectory_ifdef(CONFIG_FXAS21002 fxas21002)
add_subdirectory_ifdef(CONFIG_FXOS8700 fxos8700)
sensors: move grove sensors under drivers/sensor Grove devices are sensors, so no need to have them under their own category. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-10-19 20:43:50 +08:00
add_subdirectory(grove)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_HDC1008 hdc1008)
add_subdirectory_ifdef(CONFIG_HMC5883L hmc5883l)
add_subdirectory_ifdef(CONFIG_HP206C hp206c)
add_subdirectory_ifdef(CONFIG_HTS221 hts221)
add_subdirectory_ifdef(CONFIG_ISL29035 isl29035)
add_subdirectory_ifdef(CONFIG_LIS2DH lis2dh)
driver/sensor: add LIS2DS12 sensor support Add support to STM LIS2DS12 3-axis accelerometer driver. The driver support I2C and SPI bus communication and both polling and drdy trigger mode. Currently it uses high resolution only as power mode. Signed-off-by: Armando Visconti <armando.visconti@st.com>
2019-01-15 21:59:12 +08:00
add_subdirectory_ifdef(CONFIG_LIS2DS12 lis2ds12)
driver: sensor: Add support for LIS2MDL Mag sensor Added support to LIS2MDL Magnetometer sensor provided with following features: - I2C interface - Mag data - Temperature data - ODR configurable by config or at runtime - Trigger mode selectable by menuconfig - IRQ pin configurable (by dts or Kconfig) - Hard Iron offset setting at runtime - Include yaml file Tested on ST MEMS IKS01A2 + NUCLEO STM32F411RE board. LIS2MDL connected to I2C master interface (SPI 3 wire not supported yet). Test run with all ODR {10, 20, 50, 100} Hz in poll and trigger mode. GPIO IRQ dts configuration has been tested by adding to boards/arm/nucleo_f411re/nucleo_f411re.dts file this patch: &i2c1 { status = "ok"; clock-frequency = <I2C_BITRATE_FAST>; + + /* ST Microelectronics LIS2MDL mag sensor */ + lis2mdl-magn@1e { + compatible = "st,lis2mdl-magn"; + reg = <0x1e>; + irq-gpios = <&gpioa 4 0>; + label = "LIS2MDL"; + status = "ok"; + }; }; and adding boards/arm/nucleo_f411re/dts.fixup with following content: ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_LABEL ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BASE_ADDRESS ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BUS_NAME ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_CONTROLLER ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_PIN For more info on this LIS2MDL please follow this link: http://www.st.com/en/mems-and-sensors/lis2mdl.html Signed-off-by: Mario Tesi <mario.tesi@st.com>
2018-03-08 22:34:55 +08:00
add_subdirectory_ifdef(CONFIG_LIS2MDL lis2mdl)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_LIS3MDL lis3mdl)
add_subdirectory_ifdef(CONFIG_LPS22HB lps22hb)
add_subdirectory_ifdef(CONFIG_LPS25HB lps25hb)
drivers: sensor: lsm303dlhc magnetometer driver Enable magnetometer measurement Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
2018-03-02 04:54:36 +08:00
add_subdirectory_ifdef(CONFIG_LSM303DLHC_MAGN lsm303dlhc_magn)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_LSM6DS0 lsm6ds0)
add_subdirectory_ifdef(CONFIG_LSM6DSL lsm6dsl)
add_subdirectory_ifdef(CONFIG_LSM9DS0_GYRO lsm9ds0_gyro)
add_subdirectory_ifdef(CONFIG_LSM9DS0_MFD lsm9ds0_mfd)
add_subdirectory_ifdef(CONFIG_MAX30101 max30101)
add_subdirectory_ifdef(CONFIG_MAX44009 max44009)
add_subdirectory_ifdef(CONFIG_MCP9808 mcp9808)
add_subdirectory_ifdef(CONFIG_MPU6050 mpu6050)
drivers: sensors: Added MS5837 driver Added MS5837 pressure sensor driver Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-04-30 00:04:33 +08:00
add_subdirectory_ifdef(CONFIG_MS5837 ms5837)
drivers: sensor: Fix some code style issues Signed-off-by: Yongfa Zhou <yongfa.zhou@intel.com>
2017-11-24 21:50:13 +08:00
add_subdirectory_ifdef(CONFIG_PMS7003 pms7003)
drivers: sensors: qdec_nrfx: Add support for Nordic QDEC Add a QDEC driver that utilizes Nordic's QDEC. This closes issue #9364 Jira:DESK-259 Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
2018-10-17 16:39:10 +08:00
add_subdirectory_ifdef(CONFIG_QDEC_NRFX qdec_nrfx)
cmake: Fixed drivers/sensor/CMakeLists.txt Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-10 22:31:48 +08:00
add_subdirectory_ifdef(CONFIG_TEMP_NRF5 nrf5)
add_subdirectory_ifdef(CONFIG_SHT3XD sht3xd)
add_subdirectory_ifdef(CONFIG_SX9500 sx9500)
add_subdirectory_ifdef(CONFIG_TH02 th02)
add_subdirectory_ifdef(CONFIG_TMP007 tmp007)
add_subdirectory_ifdef(CONFIG_TMP112 tmp112)
driver: sensor: Add vl53l0x Add driver for ST vl53l0x time of flight sensor. This driver can be used in 2 modes : * proximity sensor : configure VL53L0X_PROXIMITY_THRESHOLD will return 1 if target is between sensor and threshold, else, 0 * distance sensor : will return the distance in millimeters from sensor to target This driver use the official STMicroelectronics library for vl53l0x. (in ext/hal/st/lib/sensor/vl53l0x) Signed-off-by: Vincent Veron <vincent.veron@st.com>
2017-07-19 22:59:43 +08:00
add_subdirectory_ifdef(CONFIG_VL53L0X vl53l0x)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
drivers: sensors: Remove usage of zephyr_library_ifdef Phasing out the usage of this cmake macro from the sensor folder. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-05-23 19:13:58 +08:00
zephyr_sources_ifdef(CONFIG_USERSPACE sensor_handlers.c)