OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/x86/intel_quark/quark_se/dts_fixup.h

73 lines
3.5 KiB
C
Raw Normal View History

license: cleanup: add SPDX Apache-2.0 license identifier Update the files which contain no license information with the 'Apache-2.0' SPDX license identifier. Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of Zephyr, which is Apache version 2. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-06 21:08:09 +08:00
/* SPDX-License-Identifier: Apache-2.0 */
dts: quark_se: Refactor SoC dts.fixup into arch/x86/soc/intel_quark/<SOC> Move common SoC dts.fixup defines into arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in the boards and only have board specific defines in boards/x86/<FOO>/dts.fixup. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-24 00:01:12 +08:00
/* SoC level DTS fixup file */
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_UART_QMSI_0_BAUDRATE DT_INTEL_QMSI_UART_B0002000_CURRENT_SPEED
#define DT_UART_QMSI_0_NAME DT_INTEL_QMSI_UART_B0002000_LABEL
#define DT_UART_QMSI_0_IRQ DT_INTEL_QMSI_UART_B0002000_IRQ_0
soc/x86/intel_quark: remove support for Quark D2000 SoC Removed Quark D2000 SoC files and first-order related DT bindings. A few config options have been moved from the CONFIG_* space to the DT_* space, as they were defined in the D2000 Kconfig files and "leaked" into the other Quark trees. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-22 06:55:54 +08:00
#define DT_UART_QMSI_0_IRQ_PRI DT_INTEL_QMSI_UART_B0002000_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_UART_QMSI_0_IRQ_FLAGS DT_INTEL_QMSI_UART_B0002000_IRQ_0_SENSE
dts: arduino101: Add device tree support for arduino101 board patch adds necessary files and does the modification to the existing files to add device support for arduino_101 board. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2017-06-23 01:49:42 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_UART_QMSI_1_BAUDRATE DT_INTEL_QMSI_UART_B0002400_CURRENT_SPEED
#define DT_UART_QMSI_1_NAME DT_INTEL_QMSI_UART_B0002400_LABEL
#define DT_UART_QMSI_1_IRQ DT_INTEL_QMSI_UART_B0002400_IRQ_0
soc/x86/intel_quark: remove support for Quark D2000 SoC Removed Quark D2000 SoC files and first-order related DT bindings. A few config options have been moved from the CONFIG_* space to the DT_* space, as they were defined in the D2000 Kconfig files and "leaked" into the other Quark trees. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-22 06:55:54 +08:00
#define DT_UART_QMSI_1_IRQ_PRI DT_INTEL_QMSI_UART_B0002400_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_UART_QMSI_1_IRQ_FLAGS DT_INTEL_QMSI_UART_B0002400_IRQ_0_SENSE
dts: arduino101: Add device tree support for arduino101 board patch adds necessary files and does the modification to the existing files to add device support for arduino_101 board. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2017-06-23 01:49:42 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_PHYS_RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
dts: arduino101: Add device tree support for arduino101 board patch adds necessary files and does the modification to the existing files to add device support for arduino_101 board. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2017-06-23 01:49:42 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_PHYS_LOAD_ADDR CONFIG_FLASH_BASE_ADDRESS
dts: x86: Add interrupt controller node patch adds interrupt controller node and interrupt property for device nodes. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2017-11-09 00:00:37 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_RAM_SIZE CONFIG_SRAM_SIZE
dts: x86: derive RAM and ROM size from dts instead of Kconfig patch removes Kconfig defines for RAM and ROM size in x86. Instead these values are derived from dts. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2018-05-10 18:22:56 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ROM_SIZE CONFIG_FLASH_SIZE
dts: x86: derive RAM and ROM size from dts instead of Kconfig patch removes Kconfig defines for RAM and ROM size in x86. Instead these values are derived from dts. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2018-05-10 18:22:56 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_IOAPIC_BASE_ADDRESS DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS
dts: quark_se: Refactor SoC dts.fixup into arch/x86/soc/intel_quark/<SOC> Move common SoC dts.fixup defines into arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in the boards and only have board specific defines in boards/x86/<FOO>/dts.fixup. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-24 00:01:12 +08:00
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
#define CONFIG_I2C_0_NAME DT_INTEL_QMSI_I2C_B0002800_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_I2C_0_BITRATE DT_INTEL_QMSI_I2C_B0002800_CLOCK_FREQUENCY
#define DT_I2C_0_IRQ DT_INTEL_QMSI_I2C_B0002800_IRQ_0
dts: i2c: cleanup CONFIG_I2C_x_IRQ_PRI The majority of cases of CONFIG_I2C_x_IRQ_PRI should be DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios driver still uses Kconfig for getting priority. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-16 10:14:07 +08:00
#define DT_I2C_0_IRQ_PRI DT_INTEL_QMSI_I2C_B0002800_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_I2C_0_IRQ_FLAGS DT_INTEL_QMSI_I2C_B0002800_IRQ_0_SENSE
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
#define CONFIG_I2C_1_NAME DT_INTEL_QMSI_I2C_B0002C00_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_I2C_1_BITRATE DT_INTEL_QMSI_I2C_B0002C00_CLOCK_FREQUENCY
#define DT_I2C_1_IRQ DT_INTEL_QMSI_I2C_B0002C00_IRQ_0
dts: i2c: cleanup CONFIG_I2C_x_IRQ_PRI The majority of cases of CONFIG_I2C_x_IRQ_PRI should be DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios driver still uses Kconfig for getting priority. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-16 10:14:07 +08:00
#define DT_I2C_1_IRQ_PRI DT_INTEL_QMSI_I2C_B0002C00_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_I2C_1_IRQ_FLAGS DT_INTEL_QMSI_I2C_B0002C00_IRQ_0_SENSE
arch/x86: Enable i2c through DTS for quark_se And adapt relevant boards accordingly. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-02-28 22:21:31 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_GPIO_QMSI_0_NAME DT_INTEL_QMSI_GPIO_B0000C00_LABEL
#define DT_GPIO_QMSI_0_IRQ DT_INTEL_QMSI_GPIO_B0000C00_IRQ_0
soc/x86/intel_quark: remove support for Quark D2000 SoC Removed Quark D2000 SoC files and first-order related DT bindings. A few config options have been moved from the CONFIG_* space to the DT_* space, as they were defined in the D2000 Kconfig files and "leaked" into the other Quark trees. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-22 06:55:54 +08:00
#define DT_GPIO_QMSI_0_IRQ_PRI DT_INTEL_QMSI_GPIO_B0000C00_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_GPIO_QMSI_0_IRQ_FLAGS DT_INTEL_QMSI_GPIO_B0000C00_IRQ_0_SENSE
#define DT_GPIO_QMSI_1_NAME DT_INTEL_QMSI_GPIO_B0800B00_LABEL
#define DT_GPIO_QMSI_1_IRQ DT_INTEL_QMSI_GPIO_B0800B00_IRQ_0
#define DT_GPIO_QMSI_1_IRQ_PRI DT_INTEL_QMSI_GPIO_B0800B00_IRQ_0_PRIORITY
#define DT_GPIO_QMSI_1_IRQ_FLAGS DT_INTEL_QMSI_GPIO_B0800B00_IRQ_0_SENSE
arch/x86: Use dts to set gpio options for quark_se and quark_d2000 Get the name and irq flags generated through dts as well. Fix Kconfig for the gpio driver accordingly. Irq priority is not set by dts for D2000 as it's irq controller does not support it. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-03-03 05:30:42 +08:00
rtc: rename CONFIG_RTC_0_NAME to DT_RTC_0_NAME. patch renames CONFIG_RTC_0_NAME to DT_RTC_0_NAME. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2018-12-18 17:33:59 +08:00
#define DT_RTC_0_NAME DT_INTEL_QMSI_RTC_B0000400_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_RTC_0_IRQ DT_INTEL_QMSI_RTC_B0000400_IRQ_0
soc/x86/intel_quark: remove support for Quark D2000 SoC Removed Quark D2000 SoC files and first-order related DT bindings. A few config options have been moved from the CONFIG_* space to the DT_* space, as they were defined in the D2000 Kconfig files and "leaked" into the other Quark trees. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-22 06:55:54 +08:00
#define DT_RTC_0_IRQ_PRI DT_INTEL_QMSI_RTC_B0000400_IRQ_0_PRIORITY
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_RTC_0_IRQ_FLAGS DT_INTEL_QMSI_RTC_B0000400_IRQ_0_SENSE
arch: Use dts to set rtc priorities for Intel quark, x86 and arc Get the name generated through dts as well. Fix the rtc driver and relevant SoCs accordingly. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-03-05 20:10:07 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_0_BASE_ADDRESS DT_SNPS_DESIGNWARE_SPI_B0001000_BASE_ADDRESS
drivers/spi: Always selecet HAS_DTS_SPI once SPI is enabled All drivers require DTS for their primary SPI settings. Removing SPI_[0-9]_NAME config option added some more samples changes. Usage of these options there was anyway not relevant. Fixes #11064 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-15 23:02:14 +08:00
#define DT_SPI_0_NAME DT_SNPS_DESIGNWARE_SPI_B0001000_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_0_IRQ DT_SNPS_DESIGNWARE_SPI_B0001000_IRQ_0
dts: spi: cleanup CONFIG_SPI_x_IRQ_PRI All of the cases of CONFIG_SPI_x_IRQ_PRI should be DT_SPI_x_IRQ_PRI. So go ahead and fix them up. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-21 20:33:39 +08:00
#define DT_SPI_0_IRQ_PRI DT_SNPS_DESIGNWARE_SPI_B0001000_IRQ_0_PRIORITY
drivers: spi: Select HAS_DTS_SPI in designware driver Makes the designware spi driver consistent with other spi drivers by selecting HAS_DTS_SPI in the driver. This required adding spi nodes and dts fixups to several arc and x86 socs, as well as enabling those nodes in associated boards. Also refactors the driver to use the base address, interrupt number, and interrupt priority from dts. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-27 04:31:53 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_1_BASE_ADDRESS DT_SNPS_DESIGNWARE_SPI_B0001400_BASE_ADDRESS
drivers/spi: Always selecet HAS_DTS_SPI once SPI is enabled All drivers require DTS for their primary SPI settings. Removing SPI_[0-9]_NAME config option added some more samples changes. Usage of these options there was anyway not relevant. Fixes #11064 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-15 23:02:14 +08:00
#define DT_SPI_1_NAME DT_SNPS_DESIGNWARE_SPI_B0001400_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_1_IRQ DT_SNPS_DESIGNWARE_SPI_B0001400_IRQ_0
dts: spi: cleanup CONFIG_SPI_x_IRQ_PRI All of the cases of CONFIG_SPI_x_IRQ_PRI should be DT_SPI_x_IRQ_PRI. So go ahead and fix them up. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-21 20:33:39 +08:00
#define DT_SPI_1_IRQ_PRI DT_SNPS_DESIGNWARE_SPI_B0001400_IRQ_0_PRIORITY
drivers: spi: Select HAS_DTS_SPI in designware driver Makes the designware spi driver consistent with other spi drivers by selecting HAS_DTS_SPI in the driver. This required adding spi nodes and dts fixups to several arc and x86 socs, as well as enabling those nodes in associated boards. Also refactors the driver to use the base address, interrupt number, and interrupt priority from dts. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-27 04:31:53 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_2_BASE_ADDRESS DT_SNPS_DESIGNWARE_SPI_B0001800_BASE_ADDRESS
drivers/spi: Always selecet HAS_DTS_SPI once SPI is enabled All drivers require DTS for their primary SPI settings. Removing SPI_[0-9]_NAME config option added some more samples changes. Usage of these options there was anyway not relevant. Fixes #11064 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-15 23:02:14 +08:00
#define DT_SPI_2_NAME DT_SNPS_DESIGNWARE_SPI_B0001800_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_SPI_2_IRQ DT_SNPS_DESIGNWARE_SPI_B0001800_IRQ_0
dts: spi: cleanup CONFIG_SPI_x_IRQ_PRI All of the cases of CONFIG_SPI_x_IRQ_PRI should be DT_SPI_x_IRQ_PRI. So go ahead and fix them up. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-21 20:33:39 +08:00
#define DT_SPI_2_IRQ_PRI DT_SNPS_DESIGNWARE_SPI_B0001800_IRQ_0_PRIORITY
drivers: spi: Select HAS_DTS_SPI in designware driver Makes the designware spi driver consistent with other spi drivers by selecting HAS_DTS_SPI in the driver. This required adding spi nodes and dts fixups to several arc and x86 socs, as well as enabling those nodes in associated boards. Also refactors the driver to use the base address, interrupt number, and interrupt priority from dts. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-27 04:31:53 +08:00
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
#define CONFIG_WDT_0_NAME DT_INTEL_QMSI_WATCHDOG_B0000000_LABEL
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_WDT_0_IRQ DT_INTEL_QMSI_WATCHDOG_B0000000_IRQ_0
#define DT_WDT_0_IRQ_PRI DT_INTEL_QMSI_WATCHDOG_B0000000_IRQ_0_PRIORITY
#define DT_WDT_0_IRQ_FLAGS DT_INTEL_QMSI_WATCHDOG_B0000000_IRQ_0_SENSE
drivers: watchdog: Add dts support for QMSI based watchdog. patch adds the device binding for qmsi watchdog and device node for socs which are using wdt qmsi driver. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-09-20 21:23:13 +08:00
dts: quark_se: Refactor SoC dts.fixup into arch/x86/soc/intel_quark/<SOC> Move common SoC dts.fixup defines into arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in the boards and only have board specific defines in boards/x86/<FOO>/dts.fixup. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-02-24 00:01:12 +08:00
/* End of SoC Level DTS fixup file */