zephyr/boards/arm/stm32373c_eval/support/openocd.cfg

source [find board/stm32f3discovery.cfg]

$_TARGETNAME configure -event gdb-attach {
        echo "Debugger attaching: halting execution"
        reset halt
        gdb_breakpoint_override hard
}

$_TARGETNAME configure -event gdb-detach {
        echo "Debugger detaching: resuming execution"
        resume
}
boards: correct config for openocd for stm32373c The config file sourced in openocd.cfg is the nuclean_f3 one instead of the one for the stm32373c. This makes it impossible to flash the stm32373c evaluation board rev.B: Error: open failed in procedure 'init' in procedure 'ocd_bouncer' error: command exited with status 1: /opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/openocd -s /opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/share/openocd/scripts -f /home/maudat/repo_upstream/zephyr/boards/arm/stm32373c_eval/support/openocd.cfg -c init -c targets -c 'reset halt' -c 'flash write_image erase /home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin 0x8000000' -c 'reset halt' -c 'verify_image /home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin 0x8000000' -c 'reset run' -c shutdown Replace the file sourced by stm32f3discovery.cfg to flash successfully. Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> 2018-07-06 22:52:50 +08:00			`source [find board/stm32f3discovery.cfg]`
boards: add initial support for STM32373C-EVAL with SoC STM32F373VC Change-Id: Iec92b0c7e2c244bd82ee9c318f6f2cb3ed2d7397 Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com> 2016-10-28 18:27:22 +08:00
			`$_TARGETNAME configure -event gdb-attach {`
			`echo "Debugger attaching: halting execution"`
			`reset halt`
			`gdb_breakpoint_override hard`
			`}`

			`$_TARGETNAME configure -event gdb-detach {`
			`echo "Debugger detaching: resuming execution"`
			`resume`
			`}`