The config file sourced in openocd.cfg is the nuclean_f3 one instead of the one for
the stm32373c.
This makes it impossible to flash the stm32373c evaluation board rev.B:
Error: open failed
in procedure 'init'
in procedure 'ocd_bouncer'
error: command exited with status 1:
/opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/openocd -s
/opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/share/openocd/scripts
-f
/home/maudat/repo_upstream/zephyr/boards/arm/stm32373c_eval/support/openocd.cfg
-c init -c targets -c 'reset halt' -c 'flash write_image erase
/home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin
0x8000000' -c 'reset halt' -c 'verify_image
/home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin
0x8000000' -c 'reset run' -c shutdown
Replace the file sourced by stm32f3discovery.cfg to flash successfully.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
66a259a22a