147 lines
5.4 KiB
Markdown
147 lines
5.4 KiB
Markdown
# Porting How-To
|
|
|
|
This document describes the requirements and necessary steps required to port
|
|
`mcuboot` to a new target `OS`.
|
|
|
|
# Requirements
|
|
|
|
* `mcuboot` requires a configuration file, which can be included as
|
|
mcuboot_config/mcuboot_config.h, which configures various options
|
|
(that begin with MCUBOOT_).
|
|
|
|
* `mcuboot` requires that the target provides a `flash` API with ability to
|
|
get the flash's minimum write size, and read/write/erase individual sectors.
|
|
|
|
* `mcuboot` doesn't bundle a cryptographic library, which means the target
|
|
OS must already have it bundled. The supported libraries at the moment are
|
|
either `mbed TLS` or the set `tinycrypt` + `mbed TLS` (where `mbed TLS` is
|
|
used to provide functionality not existing in `tinycrypt`).
|
|
|
|
# Steps to port
|
|
|
|
## Main app and calling the bootloader
|
|
|
|
From the perspective of the target OS, the bootloader can be seen as a library,
|
|
so an entry point must be provided. This is likely a typical `app` for the
|
|
target OS, and it must call the following function to run the bootloader:
|
|
|
|
```c
|
|
int boot_go(struct boot_rsp *rsp);
|
|
```
|
|
|
|
This function is located at `boot/bootutil/loader.c` and receives a `struct
|
|
boot_rsp` pointer. The `struct boot_rsp` is defined as:
|
|
|
|
```c
|
|
struct boot_rsp {
|
|
/** A pointer to the header of the image to be executed. */
|
|
const struct image_header *br_hdr;
|
|
|
|
/**
|
|
* The flash offset of the image to execute. Indicates the position of
|
|
* the image header.
|
|
*/
|
|
uint8_t br_flash_id;
|
|
uint32_t br_image_addr;
|
|
};
|
|
```
|
|
|
|
After running the management functions of the bootloader, `boot_go` returns
|
|
an initialized `boot_rsp` which has pointers to the location of the image
|
|
where the target firmware is located which can be used to jump to.
|
|
|
|
## Configuration file
|
|
|
|
You must provide a file, mcuboot_config/mcuboot_config.h. This is
|
|
included by several files in the "library" portion of MCUboot; it
|
|
provides preprocessor definitions that configure the library's
|
|
build.
|
|
|
|
See the file samples/mcuboot_config/mcuboot_config.template.h for a
|
|
starting point and more information. This is a good place to convert
|
|
settings in your environment's configuration system to those required
|
|
by MCUboot. For example, Mynewt uses MYNEWT_VAL() and Zephyr uses
|
|
Kconfig; these configuration systems are converted to MCUBOOT_ options
|
|
in the following files:
|
|
|
|
- boot/zephyr/include/mcuboot_config/mcuboot_config.h
|
|
- boot/mynewt/mcuboot_config/include/mcuboot_config/mcuboot_config.h
|
|
|
|
## Flash Map
|
|
|
|
The bootloader requires a `flash_map` to be able to know how the flash is
|
|
partitioned. A `flash_map` consists of `struct flash_area` entries
|
|
specifying the partitions, where a `flash_area` defined as follows:
|
|
|
|
```c
|
|
struct flash_area {
|
|
uint8_t fa_id; /** The slot/scratch identification */
|
|
uint8_t fa_device_id; /** The device id (usually there's only one) */
|
|
uint16_t pad16;
|
|
uint32_t fa_off; /** The flash offset from the beginning */
|
|
uint32_t fa_size; /** The size of this sector */
|
|
};
|
|
```
|
|
|
|
`fa_id` is can be one of the following options:
|
|
|
|
```c
|
|
/* Independent from multiple image boot */
|
|
#define FLASH_AREA_BOOTLOADER 0
|
|
#define FLASH_AREA_IMAGE_SCRATCH 3
|
|
```
|
|
```c
|
|
/* Flash area IDs of the first image in case of multiple images */
|
|
#define FLASH_AREA_IMAGE_PRIMARY 1
|
|
#define FLASH_AREA_IMAGE_SECONDARY 2
|
|
```
|
|
```c
|
|
/* Flash area IDs of the second image in case of multiple images */
|
|
#define FLASH_AREA_IMAGE_PRIMARY 5
|
|
#define FLASH_AREA_IMAGE_SECONDARY 6
|
|
```
|
|
|
|
The functions that must be defined for working with the `flash_area`s are:
|
|
|
|
```c
|
|
/*< Opens the area for use. id is one of the `fa_id`s */
|
|
int flash_area_open(uint8_t id, const struct flash_area **);
|
|
void flash_area_close(const struct flash_area *);
|
|
/*< Reads `len` bytes of flash memory at `off` to the buffer at `dst` */
|
|
int flash_area_read(const struct flash_area *, uint32_t off, void *dst,
|
|
uint32_t len);
|
|
/*< Writes `len` bytes of flash memory at `off` from the buffer at `src` */
|
|
int flash_area_write(const struct flash_area *, uint32_t off,
|
|
const void *src, uint32_t len);
|
|
/*< Erases `len` bytes of flash memory at `off` */
|
|
int flash_area_erase(const struct flash_area *, uint32_t off, uint32_t len);
|
|
/*< Returns this `flash_area`s alignment */
|
|
uint8_t flash_area_align(const struct flash_area *);
|
|
/*< Initializes an array of flash_area elements for the slot's sectors */
|
|
int flash_area_to_sectors(int idx, int *cnt, struct flash_area *ret);
|
|
/*< Returns the `fa_id` for slot, where slot is 0 (primary) or 1 (secondary) */
|
|
int flash_area_id_from_image_slot(int slot);
|
|
/*< Returns the slot, for the `fa_id` supplied */
|
|
int flash_area_id_to_image_slot(int area_id);
|
|
```
|
|
|
|
## Memory management for mbed TLS
|
|
|
|
`mbed TLS` employs dynamic allocation of memory, making use of the pair
|
|
`calloc/free`. If `mbed TLS` is to be used for crypto, your target RTOS
|
|
needs to provide this pair of function.
|
|
|
|
To configure the what functions are called when allocating/deallocating
|
|
memory `mbed TLS` uses the following call [^cite1]:
|
|
|
|
```
|
|
int mbedtls_platform_set_calloc_free (void *(*calloc_func)(size_t, size_t),
|
|
void (*free_func)(void *));
|
|
```
|
|
|
|
If your system already provides functions with compatible signatures, those
|
|
can be used directly here, otherwise create new functions that glue to
|
|
your `calloc/free` implementations.
|
|
|
|
[^cite1]```https://tls.mbed.org/api/platform_8h.html```
|