Markdown considers a block of indented text after a list item to be part
of that list item. Insert a small piece of text at the top level to
prevent that.
Signed-off-by: David Brown <david.brown@linaro.org>
Updates the protected TLV specification to have their own TLV info struct,
to ease hashing without having to skip parts of the image, while adding the
ability to append new non-protected TLVs.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Since a copy/erase during a swap can result in some number of sectors
erased and copied, which is not necessarily equal to 1, update design
document and bootloader function naming to reflect this fact, by using
the postfix "_region" instead of "_sector" in those cases.
This fixes#541
Signed-off-by: Fabio Utzig <utzig@apache.org>
This patch adds the capability to check image dependencies in case
of multi-image boot. The dependencies are described with a new type
of TLV in the manifest.
Change-Id: If45f81a00d4324c881634f50156f9939e1bf8707
Signed-off-by: David Vincze <david.vincze@arm.com>
This patch adds the capability to handle multiple firmware images,
to update them independently. Also update the design documentation.
It separates the completion of aborted image swap operations and the
update of images even more as these should be happening at different
stages of the boot process according to the design proposal of
the multiple image support:
https://github.com/JuulLabs-OSS/mcuboot/pull/317.
Change-Id: I7eb5f632298bb08c805bfaee0359703b2ae19e9d
Signed-off-by: David Vincze <david.vincze@arm.com>
This patch introduces the BOOT_IMAGE_NUMBER macro and current_image
variable to support multiple updatable images and the associated
extended flash layout.
The FLASH_AREA_IMAGE_* object-like macros are replaced with
function-like ones and therefore some functions have been updated,
because the labels of a switch statement and the initialization
values of objects with static storage duration have to be constant
expressions.
Change-Id: Ib7b26ec3c94233e52db4f97825ddb6a3e55bb1d3
Signed-off-by: David Vincze <david.vincze@arm.com>
Overload the swap_type field in image trailer to store as an addition
the image sequence number. It indicates which image's swap was
interrupted. It is required by multi image boot to determine which
image the trailer belongs to if boot status is found on scratch area
when the swap operation is resumed.
Change-Id: I6820fd8277931aff4f0db408376eae8b42a030ed
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: David Vincze <david.vincze@arm.com>
This adds ed25519 signature support using the "prehash" method. Instead
of using the direct contents of the image and header payloads, a sha256
is generated and signed (SHA256-Ed25519). This allows for compatibility
with already existing tools that use the sha256 hash, like mcumgr, etc.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This fixes#480.
When mcuboot rewrites image trailers during a swap, some information is
lost. If a reset occurs before the swap completes, mcuboot may not be
able to determine what which swap type to resume upon startup.
Specifically, if a "revert" swap gets interupted, mcuboot will perform
an extraneous swap on the subsequent boot. See
https://github.com/JuulLabs-OSS/mcuboot/issues/480 for details.
This commit adds an additional field to the image trailer: `swap-type`.
The new trailer structure is illustrated below:
```
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ ~
~ Swap status (BOOT_MAX_IMG_SECTORS * min-write-size * 3) ~
~ ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ Encryption key 0 (16 octets) [*] ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ Encryption key 1 (16 octets) [*] ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Swap size | 0xff padding (4 octets) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Swap type | 0xff padding (7 octets) ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Copy done | 0xff padding (7 octets) ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Image OK | 0xff padding (7 octets) ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
~ MAGIC (16 octets) ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
```
The `swap-type` field contains one of the `BOOT_SWAP_TYPE_[...]` constants.
Every time a trailer is written, this field is written along with it.
When resuming an interrupted swap, mcuboot uses this field alone to
determine the type of swap being resumed. For new swap operations
(non-resume case), this field is not read at all; instead, mcuboot
consults the `boot_swap_tables` array to determine the swap operation to
perform (as it did prior to this commit).
Some additional changes were necessary to make all the simulated unit
tests pass:
* Before initiating a new swap operation, always write the image trailer
to the scratch area. This step allows mcuboot to persist the
`swap-type` field somewhere before erasing the trailer in the primary
slot. If a reset occurs immediately after the erase, mcuboot recovers
by using the trailer in the scratch area.
* Related to the above: if the scratch area is being used to hold status
bytes (because there are no spare sectors in the primary slot), erase
the scratch area immediately after the trailer gets written to the
primary slot. This eliminates ambiguity regarding the location of the
current trailer in case a reset occurs shortly afterwards.
Signed-off-by: Christopher Collins <ccollins@apache.org>
This change replaces the slot 0/1 terminology with primary/secondary
slot and replaces FLASH_AREA_IMAGE_0/1 with
FLASH_AREA_IMAGE_PRIMARY/SECONDARY. This naming convention may be more
understandable, fits better to MCUs with multiple images and it is an
architecture agnostic alternative as well.
Change-Id: I655a585f6ae023852c671ee6635399efe25209c9
Signed-off-by: David Vincze <david.vincze@arm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
pyocd 0.14.0 merged its command-line tools into a unified pyocd tool
with subcommands. The separate command-line tools still remain, but are
deprecated. Update all pyocd calls in samples and documentation to use
the new unified pyocd tool with subcommands.
Note that pyocd 0.15.0 has an issue with the command 'pyocd erase',
which was fixed in pyocd 0.16.0.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This will fix#336 by adding deprecation warning to Jira and
Confluence links as these are not used by the project anymore.
Signed-off-by: Sigvart M. Hovland <sigvart.m@gmail.com>
`bootutil` was updated to use exclusively `flash_area_align` removing the
dependency on this single `hal_flash` function.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Mynewt uses this file to convert MYNEWT_VAL(xxx) to MCUBOOT_xxx config
options. Zephyr currently adds config options via the compiler command
line, but it should use this instead.
As prep work for that conversion, add an empty mcuboot_config.h to the
Zephyr port, and include this file unconditionally wherever it's
needed. This takes care of the simulator as well, since that puts
boot/zephyr/include on its C file include path.
This turned up a couple of files (bootutil_priv.h and caps.c) that
were using the MCUBOOT_xxx config values without including the
file. Add the includes there, as they'll be needed later.
To make this official, add it to the requirements in the porting guide
and provide a template file porters can use while getting started.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
fixup! Mandate the presence of mcuboot_config/mcuboot_config.h
Remove the obsolete `sign.sh` script, and fixup the documentation to
refer to the new tooling.
Fixes#245.
Signed-off-by: David Brown <david.brown@linaro.org>
Add precisions to the information regarding flashing MCUboot and Zephyr
application images in order to make users aware of mass-erase scenarios
that might bite them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the sample application now uses the BOOTLOADER_MCUBOOT
configuration option, refer to it in the Zephyr documentation itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Github pages assumes that links to files using relative
names point to the same location so this should work both
when accessing through the github browser and mcuboot.com
Signed-off-by: Fabio Utzig <utzig@apache.org>
Instead of relying on distro packages standardize the imgtool
dependencies into a requirements.txt.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Link to usage instructions from the main README file and from
docs/index.md so that the usage is visible from the root documentation
files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid having multiple documentation standards, transition all
documentation files to the Markdown (md) format and move them to the
docs/ folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fabio Utzig