As described in the NT35510 Application Note V0.04, the DPRSLCTR register
(Display Resolution Control - B500h) needs to be set to 50h for the 480x800
display resolution.
The same patch has already been submitted and merged into the STM32CubeF7
project:
72e73bbb41
Fixes: d599a824df ("Release v1.26.0")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Details: Below the list of the different fixes and enhancements. Please refer to the https://github.com/STMicroelectronics/stm32f4xx_hal_driver repository to view the changes introduced by each fix or enhancement in a separate commit.
- [HAL][LL][ADC] Apply artistic style fixes
- [HAL][LL][LPTIM] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][LL][TIM] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][LL][USART] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][CAN] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][CEC] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][CEC] Remove multiple volatile reads or writes in interrupt handler for better performance
- [HAL][CRYP] Apply MCUAstyle fixes and update Crypt/Decrypt IT processes to avoid Computation Completed IRQ fires before the DINR pointer increment
- [HAL][DFSDM] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][DSI] Update to align DSI ULPS entry and exit sequences with reference manual
- [HAL][EXTI] Fix computation of pExtiConfig->GPIOSel in HAL_EXTI_GetConfigLine()
- [HAL][GENERIC] Allow redefinition of macro UNUSED(x)
- [HAL][I2C] Clear ACK bit once 3 bytes to read remain to be able to send the NACK once the transfer ends
- [HAL][I2C] Clear the ADDRF flag only when direction is confirmed as changed, to prevent that the ADDRF flag is cleared too early when the restart is received
- [HAL][I2C] Duplicate the test condition after timeout detection to avoid false timeout detection
- [HAL][I2C] Move polling code of HAL memory interface through interrupt management to prevent timeout issue using HAL MEM interface through FreeRTOS
- [HAL][I2C] Update HAL I2C driver to prefetch data before starting the transmission (implementation of errata sheet workaround I2C2-190208: Transmission stalled after first byte)
- [HAL][I2C] Update HAL_I2C_Master_Transmit_IT to return HAL_BUSY instead of HAL_ERROR when timeout occur and I2C_FLAG_BUSY is SET
- [HAL][I2C] Update I2C_IsErrorOccurred to return error if timeout is detected
- [HAL][I2C] Update I2C_MemoryTransmit_TXE_BTF process to disable TXE and BTF interrupts if nothing to do and clear TXE Flag at the end of transfer
- [HAL][IRDA] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][RCC] Correct the configuration macro of I2S clock source and the value of I2S external clock source
- [HAL][RCC] Set the minimum value of PLLM
- [HAL][RCC] Update comment in HAL_RCC_OscConfig()
- [HAL][RTC] Check if the RTC calendar has been previously initialized before entering initialization mode
- [HAL][SAI] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][SAI] Improve audio quality (avoid potential glitch)
- [HAL][SMARTCARD] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][SMBUS] Change previous state from HAL_SMBUS_STATE_READY to HAL_SMBUS_STATE_NONE at the end of transfer
- [HAL][SMBUS] Update HAL SMBUS driver to prefetch data before starting the transmission (implementation of errata sheet workaround I2C2-190208: Transmission stalled after first byte)
- [HAL][SMBUS] Update to fix issue of mismatched data received by master in case of data size to be transmitted by the slave is greater than the data size to be received by the master and add flush on TX register
- [HAL][SPI] Fix driver to don't update state in case of error (HAL_SPI_STATE_READY will be set only in case of HAL_TIMEOUT)
- [HAL][SPI] Update IT API to enable interrupts after process unlock
- [HAL][TIM] Align TIM_TIM2_ETH_PTP definition with the reference manual specification
- [HAL][UART] Add 'const' qualifier to comply to MISRA-C rule 8.13
- [HAL][UART] Add a new API HAL_UARTEx_GetRxEventType that could be used to retrieve the type of event that has led the RxEventCallback execution
- [HAL][UART] Remove __HAL_LOCK() and __HAL_UNLOCK() invocation from Tx and Rx APIs
- [LL][ADC] Cast both LL_ADC_REG_ReadConversionData6() and LL_ADC_REG_ReadConversionData8() returned values from uint16_t to uint8_t to be consistent with prototypes
- [LL][ADC] Update LL_ADC_DMA_GetRegAddr() API to prevent compilation warning due to unused 'Register' parameter
- [LL][RTC] Correct misleading note about shadow registers
- [LL][USB] Remove useless software setting to setup the frame interval at 80%
- [LL][USB] Update USB_ClearInterrupts() to not clear all interrupts
To prevent compiler warnings/errors we have to wrap the definition of
UNUSED with an ifndef. So there are no problems if this is already
defined in the project
Signed-off-by: Peter Tönz <peter.tonz@husqvarnagroup.com>
Rationale:
- MW libraries subject to click-thru have been already removed from this repo, but not the projects using them.
- Building these projects, whether manually or automatically via some ACI tool would yield errors.
- Particularly with daily (or nightly) builds in the frame of a CI/CD strategy, such errors would pollute the logs uselessly.
Note: If needed, the removed items can be found in the full firmware package on st.com. Please refer to the README.md file for further details.
Folder 'Middlewares/Third_Party/FatFS' need to be renamed 'Middlewares/Third_Party/FatFs' (.../...FS --> .../...Fs) as projects' configurations refer to this folder with name '.../FatFs'. This causes compilation errors in Linux environments.
Folder 'Middlewares/Third_Party/FatFS' need to be renamed 'Middlewares/Third_Party/FatFs' (.../...FS --> .../...Fs) as projects' configurations refer to this folder with name '.../FatFs'. This causes compilation errors in Linux environments.
NOTE: This first commit is necessary to ensure the change of letter case is well considered in environments based on case-insensitive file systems.
Rania JMAI