From rpi-6.1.y the i2c-sensor overlay includes support for the BNO055,
which occupies fragments 30 & 31. The driver for this devices does not
exist in the 5.15 kernel, so the rpi-5.15.y version of the overlay does
not include it.
Forward-porting new sensors added to rpi-5.15.y is made easier if the
same fragment numbers are used, so add a comment in the rpi-5.15.y
source explaining the gap.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
See: https://forum.libreelec.tv/thread/24780-le-10-0-1-rpi4-no-picture-after-update-from-le-10-0-0
Issue is some displays go blank at the point of firmware to kms handover.
Plugging/unplugging hdmi cable, power cycling display, or switching standby off/on
typically resolve this case.
Finally managed to find a display that suffers from this, and track down the issue.
The firmware uses AVMUTE in normal operation. It will set AVMUTE before disabling hdmi
clocks and phy. It will clear AVMUTE after clocks and phy are set up for a new hdmi mode.
But with the hdmi handover from firmware to kms, AVMUTE will be set by firmware.
kms driver typically has no GCP packet (except for deep colour modes).
The spec isn't clear on whether to consider the AVMUTE as continuing indefinitely
in the absense of a GCP packet, or to consider that state to have ended.
Most displays behave as we want, but there are a number (from mutiple manufacturers)
which need to see AVMUTE cleared before displaying a picture.
Lets just always enable GCP packet with AVMUTE cleared. That resolves the issue on
problematic displays.
From HDMI 1.4 spec:
A CD field of zero (Color Depth not indicated) shall be used whenever the Sink does
not indicate support for Deep Color. This value may also be used in Deep Color mode
to transmit a GCP indicating only non-Deep Color information (e.g. AVMUTE).
So use CD=0 where we were previously not enabling a GCP.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
During normal operations, the cursor position update is done through an
asynchronous plane update, which on the vc4 driver basically just
modifies the right dlist word to move the plane to the new coordinates.
However, when we have the overscan margins setup, we fall back to a
regular commit when we are next to the edges. And since that commit
happens to be on a cursor plane, it's considered a legacy cursor update
by KMS.
The main difference it makes is that it won't wait for its completion
(ie, next vblank) before returning. This means if we have multiple
commits happening in rapid succession, we can have several of them
happening before the next vblank.
In parallel, our dlist allocation is tied to a CRTC state, and each time
we do a commit we end up with a new CRTC state, with the previous one
being freed. This means that we free our previous dlist entry (but don't
clear it though) every time a new one is being committed.
Now, if we were to have two commits happening before the next vblank, we
could end up freeing reusing the same dlist entries before the next
vblank.
Indeed, we would start from an initial state taking, for example, the
dlist entries 10 to 20, then start a commit taking the entries 20 to 30
and setting the dlist pointer to 20, and freeing the dlist entries 10 to
20. However, since we haven't reach vblank yet, the HVS is still using
the entries 10 to 20.
If we were to make a new commit now, chances are the allocator are going
to give the 10 to 20 entries back, and we would change their content to
match the new state. If vblank hasn't happened yet, we just corrupted
the active dlist entries.
A first attempt to solve this was made by creating an intermediate dlist
buffer to store the current (ie, as of the last commit) dlist content,
that we would update each time the HVS is done with a frame. However, if
the interrupt handler missed the vblank window, we would end up copying
our intermediate dlist to the hardware one during the composition,
essentially creating the same issue.
Since making sure that our interrupt handler runs within a fixed,
constrained, time window would require to make Linux a real-time kernel,
this seems a bit out of scope.
Instead, we can work around our original issue by keeping the dlist
slots allocation longer. That way, we won't reuse a dlist slot while
it's still in flight. In order to achieve this, instead of freeing the
dlist slot when its associated CRTC state is destroyed, we'll queue it
in a list.
A naive implementation would free the buffers in that queue when we get
our end of frame interrupt. However, there's still a race since, just
like in the shadow dlist case, we don't control when the handler for
that interrupt is going to run. Thus, we can end up with a commit adding
an old dlist allocation to our queue during the window between our
actual interrupt and when our handler will run. And since that buffer is
still being used for the composition of the current frame, we can't free
it right away, exposing us to the original bug.
Fortunately for us, the hardware provides a frame counter that is
increased each time the first line of a frame is being generated.
Associating the frame counter the image is supposed to go away to the
allocation, and then only deallocate buffers that have a counter below
or equal to the one we see when the deallocation code should prevent the
above race from occuring.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The ISP cases do nothing. Remove the break that separates them from the
deinterlace case so they now do the same as deinterlace. This enables
simple width & height setting, but does not enable setting left and
top coordinates.
Signed-off-by: John Cox <jc@kynesim.co.uk>
Modify the kernel build workflow to create artifacts with the correct
names and structure, both as an example of what we expect and in case
anyone wants to use the output.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit 1d66e37973 upstream.
Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid. This is a surprising
behavior that is further clarified by commit cb3e7d624c ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").
With that commit in place the following interaction can be seen
when the lid is closed:
[ 28.946038] PM: suspend-to-idle
[ 28.946083] ACPI: EC: ACPI EC GPE status set
[ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.950152] Timekeeping suspended for 3.320 seconds
[ 28.950152] PM: Triggering wakeup from IRQ 9
[ 28.950152] ACPI: EC: ACPI EC GPE status set
[ 28.950152] ACPI: EC: ACPI EC GPE dispatched
[ 28.995057] ACPI: EC: ACPI EC work flushed
[ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.995131] PM: Triggering wakeup from IRQ 9
[ 28.995271] ACPI: EC: ACPI EC GPE status set
[ 28.995291] ACPI: EC: ACPI EC GPE dispatched
[ 29.098556] ACPI: EC: ACPI EC work flushed
[ 29.207020] ACPI: EC: ACPI EC work flushed
[ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[ 29.211095] Timekeeping suspended for 0.739 seconds
[ 29.211095] PM: Triggering wakeup from IRQ 9
[ 29.211079] PM: Triggering wakeup from IRQ 7
[ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[ 29.211095] PM: resume from suspend-to-idle
* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.
What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events. When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).
The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed. This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 613b14884b upstream.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6db6f9398 upstream.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af82425c6a upstream.
If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.
Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c25422d34 upstream.
When scsi_dma_map() fails by returning a sges_left value less than zero,
the amount of logging produced can be extremely high. In a recent end-user
environment, 1200 messages per second were being sent to the log buffer.
This eventually overwhelmed the system and it stalled.
These error messages are not needed. Remove them.
Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 703c13fe3c ]
In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.
Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.
Fixes: 98086df8b7 ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2c3ccbd00 ]
When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.
This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.
For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| [0000000000000000] user address but active_mm is swapper
| Internal error: Oops: 96000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cpus_are_stuck_in_kernel+0xa4/0x120
| lr : secondary_start_kernel+0x164/0x170
| sp : ffff80000a4cbe90
| x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
| x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
| x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
| x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
| x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
| x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
| x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
| Call trace:
| cpus_are_stuck_in_kernel+0xa4/0x120
| __secondary_switched+0xb0/0xb4
| Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
| ---[ end trace 0000000000000000 ]---
This is confusing and hinders debugging, and will be problematic for
CONFIG_LIVEPATCH as these cases cannot be unwound reliably.
This is very similar to recent issues with out-of-line exception fixups,
which were removed in commits:
35d67794b8 ("arm64: lib: __arch_clear_user(): fold fixups into body")
4012e0e227 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
139f9ab73d ("arm64: lib: __arch_copy_to_user(): fold fixups into body")
When the trampolines were introduced in commit:
addfc38672 ("arm64: atomics: avoid out-of-line ll/sc atomics")
The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:
* As the subsections are collapsed into sections at object file
granularity, these are spread out throughout the kernel and can share
cachelines with unrelated code regardless.
* GCC 12.1.0 has been observed to place the trampoline out-of-line in
specialised __ll_sc_*() functions, introducing more branching than was
intended.
* Removing the trampolines has been observed to shrink a defconfig
kernel Image by 64KiB when building with GCC 12.1.0.
This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.
Other than the improved backtracing, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045 ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6082e94a ]
The code for the atomic ops is formatted inconsistently, and while this
is not a functional problem it is rather distracting when working on
them.
Some have ops have consistent indentation, e.g.
| #define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \
| static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \
| { \
| u32 tmp; \
| \
| asm volatile( \
| __LSE_PREAMBLE \
| " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \
| " add %w[i], %w[i], %w[tmp]" \
| : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \
| : "r" (v) \
| : cl); \
| \
| return i; \
| }
While others have negative indentation for some lines, and/or have
misaligned trailing backslashes, e.g.
| static inline void __lse_atomic_##op(int i, atomic_t *v) \
| { \
| asm volatile( \
| __LSE_PREAMBLE \
| " " #asm_op " %w[i], %[v]\n" \
| : [i] "+r" (i), [v] "+Q" (v->counter) \
| : "r" (v)); \
| }
This patch makes the indentation consistent and also aligns the trailing
backslashes. This makes the code easier to read for those (like myself)
who are easily distracted by these inconsistencies.
This is intended as a cleanup.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045 ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 544d163d65 upstream.
syzbot reports an issue with overflow filling for IOPOLL:
WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
io_fill_cqe_req io_uring/io_uring.h:168 [inline]
io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e966fcca ]
Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.
The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cde363ab7c ]
Add a section to document all the different ways in which the KVM API sucks.
I am sure there are way more, give people a place to vent so that userspace
authors are aware.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110712.222449-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 115d9d77bb ]
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c965daac37 ]
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e91c72e56 ]
This patch fix the pulse per second output delta between
two synchronized end-points.
Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.
How to test:
1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>
2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant
./testptp -d /dev/ptp0 -L 0,2
./testptp -d /dev/ptp0 -p 1000000000
3) Measure the output using analyzer for both end-points
Fixes: 87938851b6 ("igc: enable auxiliary PHC functions for the i225")
Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d891f2b724 ]
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef32 ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d515d63cae ]
Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.
To fix this issue, check if the encap rule has gbp option and don't
offload the rule
Fixes: d8f9dfae49 ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe91d57277 ]
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Fixes: 3d8c38af14 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e17f99220 ]
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b18da408 ]
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes: 582e84f7b7 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 184177c3d6 ]
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 27bd0020 addiu sp,sp,32
40048c: 10e00001 beqz a3,400494 <sys_brk+0x18>
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 10e00002 beqz a3,400494 <sys_brk+0x18>
40048c: 27bd0020 addiu sp,sp,32
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
400498: 00000000 nop
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dffeb81af5 ]
By doing so we can link together multiple C files that have been compiled
with nolibc and which each have a _start symbol.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271661c1cd ]
In order to ease maintenance, this splits the arch-specific code into
one file per architecture. A common file "arch.h" is used to include the
right file among arch-* based on the detected architecture. Projects
which are already split per architecture could simply rename these
files to $arch/arch.h and get rid of the common arch.h. For this
reason, include guards were placed into each arch-specific file.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc7a492ad0 ]
The macros and type definitions used by a number of syscalls were moved
to types.h where they will be easier to maintain. A few of them
are arch-specific and must not be moved there (e.g. O_*, sys_stat_struct).
A warning about them was placed at the top of the file.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 967cce191f ]
The ordering of includes and definitions for now is a bit of a mess, as
for example asm/signal.h is included after int definitions, but plenty of
structures are defined later as they rely on other includes.
Let's move the standard type definitions to a dedicated file that is
included first. We also move NULL there. This way all other includes
are aware of it, and we can bring asm/signal.h back to the top of the
file.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c2970fbb4 ]
This arch doesn't provide the old-style select() syscall, we have to
use pselect6().
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bdc0e7a39 ]
Note that mov to 32-bit register will zero extend to 64-bit register.
Thus `mov $60,%eax` has the same effect with `mov $60,%rax`. Use the
shorter opcode to achieve the same thing.
```
b8 3c 00 00 00 mov $60,%eax (5 bytes) [1]
48 c7 c0 3c 00 00 00 mov $60,%rax (7 bytes) [2]
```
Currently, we use [2]. Change it to [1] for shorter code.
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf91666959 ]
Linux x86-64 syscall only clobbers rax, rcx and r11 (and "memory").
- rax for the return value.
- rcx to save the return address.
- r11 to save the rflags.
Other registers are preserved.
Having r8, r9 and r10 in the syscall clobber list is harmless, but this
results in a missed-optimization.
As the syscall doesn't clobber r8-r10, GCC should be allowed to reuse
their value after the syscall returns to userspace. But since they are
in the clobber list, GCC will always miss this opportunity.
Remove them from the x86-64 syscall clobber list to help GCC generate
better code and fix the comment.
See also the x86-64 ABI, section A.2 AMD64 Linux Kernel Conventions,
A.2.1 Calling Conventions [1].
Extra note:
Some people may think it does not really give a benefit to remove r8,
r9 and r10 from the syscall clobber list because the impression of
syscall is a C function call, and function call always clobbers those 3.
However, that is not the case for nolibc.h, because we have a potential
to inline the "syscall" instruction (which its opcode is "0f 05") to the
user functions.
All syscalls in the nolibc.h are written as a static function with inline
ASM and are likely always inline if we use optimization flag, so this is
a profit not to have r8, r9 and r10 in the clobber list.
Here is the example where this matters.
Consider the following C code:
```
#include "tools/include/nolibc/nolibc.h"
#define read_abc(a, b, c) __asm__ volatile("nop"::"r"(a),"r"(b),"r"(c))
int main(void)
{
int a = 0xaa;
int b = 0xbb;
int c = 0xcc;
read_abc(a, b, c);
write(1, "test\n", 5);
read_abc(a, b, c);
return 0;
}
```
Compile with:
gcc -Os test.c -o test -nostdlib
With r8, r9, r10 in the clobber list, GCC generates this:
0000000000001000 <main>:
1000: f3 0f 1e fa endbr64
1004: 41 54 push %r12
1006: 41 bc cc 00 00 00 mov $0xcc,%r12d
100c: 55 push %rbp
100d: bd bb 00 00 00 mov $0xbb,%ebp
1012: 53 push %rbx
1013: bb aa 00 00 00 mov $0xaa,%ebx
1018: 90 nop
1019: b8 01 00 00 00 mov $0x1,%eax
101e: bf 01 00 00 00 mov $0x1,%edi
1023: ba 05 00 00 00 mov $0x5,%edx
1028: 48 8d 35 d1 0f 00 00 lea 0xfd1(%rip),%rsi
102f: 0f 05 syscall
1031: 90 nop
1032: 31 c0 xor %eax,%eax
1034: 5b pop %rbx
1035: 5d pop %rbp
1036: 41 5c pop %r12
1038: c3 ret
GCC thinks that syscall will clobber r8, r9, r10. So it spills 0xaa,
0xbb and 0xcc to callee saved registers (r12, rbp and rbx). This is
clearly extra memory access and extra stack size for preserving them.
But syscall does not actually clobber them, so this is a missed
optimization.
Now without r8, r9, r10 in the clobber list, GCC generates better code:
0000000000001000 <main>:
1000: f3 0f 1e fa endbr64
1004: 41 b8 aa 00 00 00 mov $0xaa,%r8d
100a: 41 b9 bb 00 00 00 mov $0xbb,%r9d
1010: 41 ba cc 00 00 00 mov $0xcc,%r10d
1016: 90 nop
1017: b8 01 00 00 00 mov $0x1,%eax
101c: bf 01 00 00 00 mov $0x1,%edi
1021: ba 05 00 00 00 mov $0x5,%edx
1026: 48 8d 35 d3 0f 00 00 lea 0xfd3(%rip),%rsi
102d: 0f 05 syscall
102f: 90 nop
1030: 31 c0 xor %eax,%eax
1032: c3 ret
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Link: https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/x86-64-psABI [1]
Link: https://lore.kernel.org/lkml/20211011040344.437264-1-ammar.faizi@students.amikom.ac.id/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 184177c3d6 ("tools/nolibc: restore mips branch ordering in the _start block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d6ceeb187 ]
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dab880d67 ]
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)
Fixes: c46ee38620 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0dccad87c ]
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
Fixes: 02e19f9c7c ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e9b8763e ]
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Fixes: 1435f66a28 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c244c092f1 ]
This unexpected behavior is observed:
node 1 | node 2
------ | ------
link is established | link is established
reboot | link is reset
up | send discovery message
receive discovery message |
link is established | link is established
send discovery message |
| receive discovery message
| link is reset (unexpected)
| send reset message
link is reset |
It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."
However, commit 598411d70f has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.
This commit fixes this by restoring the old and correct behavior.
Fixes: 598411d70f ("tipc: make resetting of links non-atomic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d463ac1acb ]
The fix commit the commit e4ea77f8e5 ("ALSA: usb-audio: Always apply
the hw constraints for implicit fb sync") tried to address the bug
where an incorrect PCM parameter is chosen when two (implicit fb)
streams are set up at the same time. This change had, however, some
side effect: once when the sync endpoint is chosen and set up, this
restriction is applied at the next hw params unless it's freed via hw
free explicitly.
This patch is a workaround for the problem by relaxing the hw
constraints a bit for the implicit fb sync. We still keep applying
the hw constraints for implicit fb sync, but only when the matching
sync EP is being used by other streams.
Fixes: e4ea77f8e5 ("ALSA: usb-audio: Always apply the hw constraints for implicit fb sync")
Reported-by: Ruud van Asseldonk <ruud@veniogames.com>
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0599313e26 ]
At the PCM hw params, we may re-configure the endpoints and it's done
by a temporary EP close followed by re-open. A potential problem
there is that the EP might be already running internally at the PCM
prepare stage; it's seen typically in the playback stream with the
implicit feedback sync. As this stream start isn't tracked by the
core PCM layer, we'd need to stop it explicitly, and that's the
missing piece.
This patch adds the stop_endpoints() call at snd_usb_hw_params() to
assure the stream stop before closing the EPs.
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/4e509aea-e563-e592-e652-ba44af6733fe@veniogames.com
Link: https://lore.kernel.org/r/20230102170759.29610-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472a6309c6 ]
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Elwell