OrgGo
/
hybridgroup.gobot
mirror of https://github.com/hybridgroup/gobot.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
hybridgroup.gobot/CHANGELOG.md

32 KiB
Raw Blame History

1.13.0

  • api
    • Initial stab at Robot-based work
  • build
    • correct package version as suggested by @dlisin thanks
    • only build last 2 versions of Go plus tip for CI
    • Update dep script for AppVeyor
    • update deps to latest versions of dependencies for GoCV and others
    • Update Gopkg and add test dep to Travis YML
    • update OpenCV build script for OpenCV 4.1.0
  • docs
    • update to remove Gitter and replace with Slack, and update copyright dates
  • example
    • add missing nobuild header
  • gpio
    • Add SparkFun’s EasyDriver (and BigEasyDriver)
    • Add unit tests for TH02 & Minor improvement
    • Added rudiementary support for TH02 Grove Sensor
    • pwm_pin - Fix DutyCycle() parse error, need to trim off trailing '\n' before calling strconv.Atoi(), as other functions in this package do
    • Simplify code as suggested in #617
  • grovepi
    • add mutex to control transactionality of the device communication
  • i2c
    • add 128x32 and 96x16 sizes to the i2c ssd1306 driver
    • build out the ccs811 driver
    • update PCA9685 driver to use same protocol as Adafruit Python lib
  • leapmotion
    • Parser error in Pointable.Bases: Write test and fix
    • Update gobot leap platform to support Leap Motion API v6
  • mavlink
    • fix mavlink README to use correct example code
  • mqtt
    • Add some new MQTT adaptor functions with QOS
    • Allow setting QoS on MTT adaptor
    • make tests run correctly even when a local MQTT server is in fact running
    • Do not skip verification of root CA certificates by default InsecureSkipVerify
  • nats
    • Update Go NATS client library import
  • opencv
    • minor updates to opencv README
    • update to OpenCV 4.1.0
  • sphero
    • Added methods to read Sphero Power States
    • Added some new features to the sphero ollie, bb-8 and sprkplus
  • spi
    • correct param used for APA102 Draw() method
    • Stop using Red parameter for brightness value
  • tello
    • add direct vector access
    • add example with keyboard
    • Change fps to 60
    • Check for error immediately and skip publish if error occurred
    • update FlightData struct
  • up2
    • add support for built-in LEDs
    • correct i2c default bus information to match correct values
    • finalize docs for UP2 config steps
    • update README to include more complete setup information
    • useful constant values to access the built-in LEDs

1.12.0

  • api
    • further improvement of the modular API changes
    • modify Start() for more modular initialization, and add StartRaw() for completely custom API implementations
    • settled on StartWithoutDefaults() as the method to start API without default routes
  • core
    • add Rescale utility function for straight linear rescaling
  • digispark
    • add examples using digispark with i2c devices blinkm and mlp115a2
    • Added i2c to digispark, but not working yet
    • Added some tests for digispark i2c connector
    • Digispark i2c fixes, added Test for checking available addresses
    • remove test method that should not be in adaptor
    • remove test that is expected to ofail, but passes when digispark board is actually connected
  • docs
    • add GrovePi to README
    • adjust order of badges in README
    • Fixing broken link
  • examples
    • add example that uses both the API and also a custom handler with MJPEG streaming from an attached camera
    • small improvements to Tello examples
    • update Tello examples for main thread friendly macOS/Windows, add Tello face tracker
  • i2c
    • add commands to JHD1313MDriver
    • add commands to PCA9685Driver
    • add missing methods so the GrovePi fully implements the Adaptor interface
    • add ShowImage() function to ssd1306 driver based on @mikegleasonjr suggestion
    • GrovePi digitalwrite implemented
    • implemented DigitalRead, DigitalWrite, and AnalogRead for GrovePi
    • improve godocs for PCA9685
    • mention that GrovePi requires running firmware 1.3.0
    • update GrovePi to v1.3.0 firmware
    • work in progress on GrovePi plus driver
  • joystick
    • add config file for Magicsee R1 contributed by @carl-ranson
    • add some additional test coverage for file-based config
    • added error handling for config loading in joystick driver
    • mention need to be running a Linux kernel v4.14+ for controller mappings to work as expected
    • provide constant values for existing joystick configurations
  • raspi
    • export PiBlasterPeriod in Adaptor
  • spi
    • add ShowImage() function to ssd1306 driver based on @mikegleasonjr suggestion
  • tello
    • specify end of msgType position
    • add handleResponse testing
    • Add motion cessation commands to Tello
    • handleResponse only needs an io.Reader
    • handleResponse should not send commands
    • rename reqConn to cmdConn
    • reqConn is only an io.WriteCloser
    • send Land() command to drone on Halt() to avoid floating mid-air

1.11.1

  • build
    • exclude vendor and other previously excluded subpackages
    • update Travis build to use OpenCV 3.4.2 release
    • update deps for GoCV to v0.14.0 release
    • Bump periph.io/x/periph to v3.0.0
    • update to Go 1.10.3 and 1.9.7 for Travis builds
  • docs
    • Fix Leap Motion package link
  • i2c
    • fix write/read gpio on mcp23017, and cleaned up some comments
    • correct pca9685 SetPWMFreq function scaling
  • gopigo3
    • update with default spi values, cleanup

1.11.0

  • build
    • correct profile file location for codecov upload
    • Make Go Lint happier by adding some explicit type conversions and ignoring unused error returns
    • single quotes needed to upload any .cov file to codecov for reporting
    • update deps to latest versions for Paho MQTT, go-sdl, and gocv
    • upload any .cov file to codecov for reporting
    • use go 1.10.2 and 1.9.6 for Travis builds
    • add step to call dep ensure before contributing #524
  • examples
    • correct events used by XBox360 joystick example
  • firmata
    • Update the Firmata homepage in platform README
  • gpio
    • Improve Stepper Driver
    • Initial support for MAX7219 (gpio) led driver
  • joystick
    • full corrected ds3 and ds4 mappings plus examples to match for latest sdl 2.0.8
    • add instructions to README on how to install SDL on Linux from source
    • add missing type conversion
    • add new contributions to README
    • Add T-Flight Hotas X flight controoller
    • add xbox360 rock band drums controller
    • Correct Dualshock4 controller mappings and add ps/left/right buttons
    • correct test issue
    • exclude scanner from test builds
    • Fix joystick_driver to detect dpad input for xbox controllers
    • Update dualshock4.json to match joystick_dualshock4.go
    • update scanner to match go-sdl 0.3 API changes
    • Update the joystick driver test to read DPAD properly
  • leapmotion
    • change timestamp to uint64 to fix #516
  • tello
    • slow/fast mode switch function
    • StopLanding feature
    • Add Bounce() and PalmLand() funcs and their associated events.
    • bug fix
    • Change several fields in FlightData struct from int16 to bool
    • Export the FlightData fields (see Issue #531)

1.10.2

  • opencv
    • update GoCV to latest version

1.10.1

  • tello
    • improve support for DJI Tello drone, especially video

1.10.0

  • docs
    • add gitter badge to readme
  • gpio
    • AIP1640 led driver, used in Wemos D1 mini's matrix LED shield
  • spi
    • switch to using periph.io for SPI interfaces
    • add support for ssd1306
    • add optional params such as bus/chip to all current drivers
    • complete refactoring to spi.Connection
    • remove unneeded code as suggested by @maruel
    • remove unneeded type and cleanup GoDocs
  • ble
    • correct spelling error in function name
  • build
    • update to latest version of Go 1.10 for Travis build
  • cli
    • remove extra newline
  • docs
    • add recently contributed GPIO devices to README
  • joystick
    • able to configure joysticks without external json file
    • correct error in scanning script
    • correct events used by gamepad-style up/down/left/right buttons
    • correct scanner error from ID
    • removed double release event
  • tello
    • add support for DJI Tello drone

1.9.0

  • beaglebone
    • update pin naming, docs, and examples for the latest Debian OS releases
  • opencv
    • update build settings needed to build OpenCV/GoCV as part of test suite
    • deps for latest GoCV v0.9.0
  • build
    • update Travis build to use very latest Go versions
  • docs
    • add references to new drivers for ADXL345, BH1750, and TM1638.
    • improve docs for installation and use of OpenCV/GoCV from Gobot
    • update copyright date to 2018
  • gpio
    • Initial support for TM1638 modules
  • i2c
    • Added basic driver for BH1750 (light sensor), board GY-302
    • support for accel ADXL345
  • bb8/ollie/sprkplus
    • add Boost command
    • add Set Back LED Output command
    • add Set Raw Motor Values command
    • add Set Rotation Rate command
    • add Set Stabilization command
  • test
    • Refactor TestAdaptorDigitalPinConcurrency test

1.8.0

  • sysfs
    • pause briefly to allow udev rules to apply when exporting PWMPin
  • beaglebone
    • correct uboot installation instructions
    • add SPI support
    • no more slots, add docs on configuring u-boot overlays
    • handle gpio pinmux without relying on specific pre-existing setup
  • pocketbeagle
    • add support for PocketBeagle
    • use universal io cape manager to initialize board setup
    • improve docs for latest Debian OS
  • build
    • Add dep, change how tests run in CI
    • update dependencies to latest GoCV version
  • spi
    • Add MCP3002, MCP3202, MCP3204, MCP3208, MCP3304, MCP3004, and MCP3008 A/D converter drivers
    • adding initial support for APA102 LEDs, thanks to code sample from @rakyll
    • extract shared SPI init code into spi package
  • up2
    • initial work on support for UP2 board
  • gopigo3
    • fixed set/get bug with motor dps
  • gpio
    • Adding stepper motor module
  • firmata
    • handle cases where out of sync data is read from serial port on first connecting
  • i2c
    • Change init payload sequence within jhd1313m1 driver Start() func.

1.7.1

  • sprkplus
    • add new platform for Sphero SPRK+
  • firmata
    • correct problem where last analog pin(s) were being ignored from capabilities query
  • ble
    • use go-ble/ble fork for BLE interactions
  • build
    • update to use latest OpenCV version
    • update to use latest Golang versions

1.7.0

  • curie
    • Add Linux specific step to Intel Curie docs
  • mqtt
    • Added SetCleanSession
  • build
    • add go1.9 to versions tested in Travis CI
    • add missing OpenCV lib dependency
    • Update build to use latest Golang versions
    • Travis build will now require sudo to install due to OpenCV
  • docs
    • some helpful edits for the initial spi implementation
  • gopigo3
    • integration of recent GoPiGo3 contributions
    • Added grove support, and more gopigo3 examples
  • gpio
    • Add ButtonDriver.DefaultState to allow for 'reverse' buttons (ones that go from HIGH to LOW)
  • holystone
    • Add initial support for HS-200
  • i2c
    • SSD1306.WithDisplayHeight() and SSD1306.WithDisplayWidth() for SSD1306 that use different display ratios
  • joystick
    • add CLI utilty to scan display events to make it easier to add new joyticks
    • update README to address #441
  • opencv
    • Switchover to use GoCV and OpenCV 3.3
    • Switch to use custom domain for GoCV package
    • all examples using new GoCV based code
    • correct formatting in face detect example
    • OpenCV face detector that is much more concurrent
    • update interface and examples to indicate multipurpose

1.6.0

  • core
    • log failure errors on Robot Start()
  • build
    • run test coverage with covermode=set
    • update build to use Golang 1.7.6 and 1.8.3
  • docs
    • work on ROADMAP doc
  • sysfs
    • increase test coverage
  • bb8
    • use updated ble adaptor interface for tests
  • ble
    • allow for characteristic writes both with and without a response
    • allow override of specific HCI device to use
    • eliminate race conditions from response handling
  • curie
    • Implement Accelerometer, Gyroscope, and Temperature sensors implemented
    • motion detect implemented
    • shock detect implemented
    • step count implemented
    • tap detect implemented
  • digispark
    • update blink example to display error message on Start()
    • update README with latest development info
  • edison
    • auto-discovery of Edison board option
    • removed commented lines
  • firmata
    • expose WriteSysex to external callers
    • adjust client test timeout values
    • cleanup error handling for connection code
    • client tests don't need so many goroutines
    • expose WriteSysex to external callers
    • improve connection code to use a proper timeout
    • increase test coverage
    • make it possible to test external devices that use firmata adaptor
    • refactoring firmata client
    • remove circular import in test
    • remove unused code, increase test coverage
    • return connect errors to client
    • switch to using go-serial package
    • Sysex response events now being handled as expected
  • bme280
    • fix signed/unsigned bug
    • Fixed incorrect error condition check when reading the 'ctrl_hum' register.
    • Expanded the BME280 unit test for TestBME280DriverStart() to support reading from the 'ctrl_hum' register.
    • Enables humidity readings in the BME280 driver by enforcing the write to the 'ctrl_meas' register, as per Section 5.4.3 of the BME280 data sheet
  • chip
    • Fixed PWM duty cycle calculation for C.H.I.P ServoWrite
    • Fixed PWM init bug for C.H.I.P
    • C.H.I.P PWM init robust for already enabled state
  • i2c
    • remove unused test code
    • write config register in little endian
  • joystick
    • add needed constants for all PS3 buttons
  • littlewire
    • littlewire.cc links changed to littlewire.github.io
  • mavlink
    • switch to using go-serial package
  • megapi
    • switch to using go-serial package
  • microbit
    • use updated ble adaptor interface for tests
  • minidrone
    • add example for Parrot Mambo
    • add support for Mambo external accessories
    • increase test coverage
    • never expect responses for characteristic writes
    • remove unneeded code, increase test coverage
    • separate flight status processing and add test coverage
  • neurosky
    • switch to using go-serial package
  • ollie
    • use updated ble adaptor interface for tests
  • sphero
    • switch to using go-serial package
  • tinkerboard
    • Updated Tinkerboard and sysfs tests to updated PWM polarity contract

1.5.0

  • core
    • Add Running() methods for Master and Robot and increase test coverage accordingly
  • sysfs
    • define DigitalPinnerProvider and PWMPinnerProvider interfaces
    • add Chip to be able to change pwmchip, and some related refactoring
    • add file read/write testing for failure conditions
    • proper handling of busy state vs. other errors
    • return sensible result when no valid data read
  • test
    • increase coverage on test helpers
  • build
    • switching to Travis builds using Ubuntu 14.04 Trusty
  • aio
    • only need to support AnalogReader interface
    • avoid test race conditions
    • ensure that AnalogSensor event Data is always int
  • gpio
    • only need to support DigitalReader/DigitalWriter interface
  • i2c
    • Added support for the ADS1015 and ADS1115 ADCs
    • Add INA3221 Voltage Monitor
    • Ensure lock of i2c bus for each individual operation
    • Small refactoring and increase test coverage for BMP180
  • beaglebone
    • implement DigitalPinner and PWMPinner interfaces
    • protect against pin map races
    • increase test coverage
  • chip
    • add preliminary support for C.H.I.P. Pro
    • add back ServoWrite implementation
    • implement DigitalPinnerProvider and PWMPinnerProvider interfaces
    • protect against pin map races
  • dragonboard
    • export DigitalPin and PWMPin adaptor methods
    • protect against pin map races
    • increase test coverage
  • edison
    • auto-detect arduino breakout board, if no specific board is expected
    • ensure that we initialize tristate if arduino breakout board
    • export DigitalPin and PWMPin adaptor methods
    • implement DigitalPinnerProvider and PWMPinnerProvider interfaces
    • protect against pin map races
    • refactoring to reduce code duplication
  • firmata
    • remove processing that might have been eating test events, increase test coverage
  • joule
    • implement DigitalPinnerProvider and PWMPinnerProvider interfaces
    • protect against pin map races
    • remove incorrect pin assignment and improve test coverage
    • add examples using Joule with ADS1015 ADC
    • naming system changes
    • correct pin mappings and add PWM example
  • mavlink
    • add a Mavlink-over-UDP adaptor.
  • microbit
    • Add DigitalWriter, DigitalReader, and AnalogReader support using IOPinDriver
    • Handle start error and increase test coverage
  • mqtt
    • Add a (topic, payload) event type
    • change the On handler to take mqtt.Message
    • increase test coverage
    • update examples that use mqtt for updated notification signature
  • nats
    • change the On() handler to take the subject as an argument
    • increase test coverage
  • raspi
    • implement DigitalPinnerProvider and PWMPinnerProvider interfaces
    • add implementation for PWMPinner interface that wraps pi blaster
    • fix adaptor race conditions
    • increase test coverage
  • tinkerboard
    • Add support for ASUS Tinker Board

1.4.0

  • core
    • Use 10-buffered chans for events, see #374
  • i2c
    • Many refactors and increases in test coverage
    • Eliminate race conditions introduced by tests
    • Adds Altitude() function to BMP280/BME280
    • bme280 driver Humidity compensation formula
    • ssd1306 driver implementation
  • aio
    • Eliminate race conditions introduced by tests
  • gpio
    • Fix motor mode change when speed is set
    • Eliminate race conditions introduced by tests
    • Reduce test side effects
  • ardrone
    • Increase test coverage
  • audio
    • Increase test coverage
  • bb8
    • Refactoring to use BLEConnector interface and provide tests
  • bebop
    • Increase test coverage
  • beaglebone
    • Increase test coverage
  • ble
    • Increase test coverage for battery, device information, and generic access drivers
    • Refactoring drivers to use BLEConnector interface and provide tests
  • chip
    • Added PWM0 support
    • Increase test coverage
  • digispark
    • Increase test coverage
  • dragonboard
    • Increase test coverage
  • edison
    • Remove pointless error checking code
    • Refactor digital pin creation process method
    • Increase test coverage
  • firmata
    • Eliminate race conditions introduced by tests
    • Increase test coverage for i2c commands
  • joule
    • Increase test coverage
  • joystick
    • Increase test coverage
  • keyboard
    • Increase test coverage
  • mavlink
    • Eliminate race conditions introduced by tests
    • Increase test coverage
  • mavlink
    • Increase test coverage
  • microbit
    • Refactoring to use BLEConnector interface and provide tests
    • Address #404 by adding info about required magnetometer calibration step to README
    • Increase test coverage
  • minidrone
    • Refactoring to use BLEConnector interface and provide tests
  • mqtt
    • Increase test coverage
  • nats
    • Increase test coverage
  • neurosky
    • Update neurosky README & example
    • Eliminate race conditions introduced by tests
    • Increase test coverage
  • ollie
    • Refactoring to use BLEConnector interface and provide tests
    • Correct race condition error on seq
    • Increase test coverage
  • opencv
    • Increase test coverage
  • particle
    • Increase test coverage
  • raspi
    • Address #391 by providing more details about normal development workflow
    • Increase test coverage
  • sphero
    • Eliminate race conditions
    • Increase test coverage
  • sysfs
    • Address race condition from udev rules when exporting GPIO pins
    • Increase test coverage
  • docs
    • Improve explanations for scp/ssh workflow on SoC boards
    • Include entire Apache 2.0 license in the license text
  • test
    • Add crude travis check for gofmt; format all sources
    • Significantly speed up travis and make runs
    • Remove test code no longer being called
    • Update Travis to run tests using Golang 1.8.1
    • Increase gobottest test coverage

1.3.0

  • microbit
    • Add new platform support
  • dragonboard
    • Add new platform support
  • gpio
    • Increase test coverage
  • i2c
    • Update list of supported i2c devices
    • Minor adjustments and test coverage improvements
    • Added more capabilities checks for I2C
    • Removed smbus block operations
  • core
    • Increase test coverage
  • test
    • Improvements to run tests much faster thanks @maruel
    • Use codecov.io for code coverage reporting
  • docs
    • Update CoC based on Contributor Covenant

1.2.0

  • core
    • Use new improved default namer to avoid API conflicts
  • gpio
    • Removed scaling function from servo driver
    • Correct servo driver to pass along angle to adaptor to sort out implementation
  • i2c
    • Refactored platforms and drivers to new I2C interfaces
    • Change to make I2C support more than one bus
    • Refactor drivers to support new optional params
  • bb8
    • Added collision detection support and example
  • beaglebone
    • Correct i2c buses to match actual mapping
  • ble
    • Switch to using ble package for Bluetooth LE
    • Basic serial over BLE working with Arduino101 with StandardFirmataBLE
    • WIP on multiple simultaneous ble devices
  • chip
    • Fixed chip XIO base address lookup
  • digispark
  • Fix #288 by using pkg-config to locate libusb-compat includes
  • firmata
    • Remove race conditions identified in Firmata client
    • Correct error in I2C reads not listening to board events
  • mqtt
    • Add driver for syntactical sugar around virtual devices
    • Add SSL/TLS client options support
    • Fix #277 by adding SetAutoReconnect method to set Paho MQTT client
    • Change both 'On' and 'Publish' method function signatures to match Eventer interface
  • nats
    • Add driver to make it easier to create virtual devices
  • ollie
    • Added collision detection support and example
  • parrot
    • Add ValidatePitch helper function for Parrot Minidrone, Parrot Bebop & ARDrone 2.0 to package
  • docs
    • Fix #363 by using atomic.Value to protect current values used by multiple goroutines in drone examples
  • test
    • Remove Golang 1.5 from TravisCI tests in prep for Golang 1.8 release

1.1.0

  • core
    • use canonical import path for sysfs package
  • i2c
    • Add a driver for the SHT3X chip
    • Add a driver for BMP180
    • Add support for L3GD20H gyroscope
  • firmata
    • Add support for TCPFirmata connections, allowing ESP8266 and other WiFi-connected controllers
    • Add mention to README to use 'tty.' serial port on OSX
    • Add mention of A4 and A5 normally unavailable on Firmata
  • raspi
    • Correct README build instructions with missing 'go build' command
  • snapcraft
    • Add the packaging metadata to build the gobot snap for Ubuntu Snappy
  • particle
    • Update examples to take key params via command line
    • Address #160 by adding support for tinker-servo sketch if installed on Particle device
  • esp8266 add experimental ESP8266 support to list of supported platforms
  • sysfs
    • Should fix #272 by using first byte of data as command register for I2C reads
    • Some additional cleanup suggested by golint
  • ble
    • Add generic access service driver
    • Update docs to include reference to included drivers
    • Move various test code to test file
  • ollie
    • Refactoring so no need to expose internal implementation details
  • bebop
    • Add support/example of RTP video
    • Enable video on firmware 3.3+
    • Update ps3 and video example to enable the video stream
    • Update README for brief explanation of how to get drone video
    • Corrected import paths for client examples
  • bb8
    • Correct NewDriver params and set name
    • Add missing constructor to wrap Ollie implementation
  • minidrone
    • Update README with example and which specific models are currently supported
    • Add all piloting flying state events
    • Adds Emergency() and TakePicture() commands
  • test
    • Add Golang 1.8beta2 to Travis builds
    • Correct aio references for AnalogRead tests

1.0.0

  • core

    • Refactoring to allow 'Metal' development using Gobot packages
    • Able to run robots without being part of a Master.
    • Now running all work in separate goroutines
    • Rename internal name of Master type
    • Refactor events to use channels all the way down.
    • Eliminate potential race conditions from Events and Every functions
    • Add Unsubscribe() to Eventer, now Once() works as expected
    • DeleteEvent function added to Eventer interface
    • Ranges over event channels instead of using select
    • No longer return non-standard slices of errors, instead use hashicorp/go-multierror
    • Ensure that all drivers have default names
    • Now both Robot and Master operate using AutoRun as expected
    • Use canonical import domain of gobot.io for all code
    • Use time.Sleep unless waiting for a timeout in a select
    • Uses time.NewTimer() instead of time.After() to be more efficient

  • test

    • Add deps tasks to Makefile
    • Add golang 1.7 to Travis CI tests
    • Add golang 1.8beta1 to build matrix for Travis
    • Reduce Travis builds to golang 1.4+ since it is late 2016 already
    • Complete move of test interfaces into the test files where they belong
    • Adds Parrot Minidrone and Sphero Ollie to Travis tests

  • Add missing godocs for everything

  • i2c

    • Move I2C drivers into appropriately named 'drivers/i2c' directory
    • Add support for Adafruit Servo/PWM HAT

  • gpio

    • Move GPIO drivers into appropriately named 'drivers/gpio' directory
    • Add support for PIR motion detector

  • beaglebone

    • auto-detect Linux kernel version
    • map usr LEDs to match all kernels

  • ble

    • Rename drivers to make them more obvious
    • Add test placeholders

  • chip

    • Auto-detect OS version to adjust pin mappings
    • Correct base for new 4.4 GPIO

  • edison

    • Support for other breakout boards besides Arduino

  • firmata

    • Use io.ReadFull in platforms/firmata/client
    • Update tarm/goserial to tarm/serial

  • joule

    • Add support for Intel Joule

  • megapi

    • Adding support for MakeBlock megapi

  • nats

    • Add support for NATS server

  • particle

    • Complete renaming Spark platform to Particle

  • parrot

    • Move Parrot Minidrone into own platform
    • Move both ARDrone and Bebop under Parrot package

  • raspi

    • Add missing godocs and small refactors for platform

  • sphero

    • Add initial support for Sphero BB-8 platform
    • Move Sphero Ollie into own platform

0.12.0

  • Refactor Gobot test helpers into separate package
  • Improve Gobot.Every method to return channel, allowing it to be halted
  • Refactor of sysfs adds substantial speed improvements
  • ble
    • Experimental support for Bluetooth LE.
    • Initial support for Battery & Device Information services
    • Initial support for Sphero BLE robots such as Ollie
    • Initial support for Parrot Minidrone
  • audio
    • Add new platform for Audio playback
  • gpio
    • Support added for new GPIO device:
      • RGB LED
    • Bugfixes:
      • Correct analog to better handle quick changes
      • Correct handling of errors and buffering for Wiichuk
  • mqtt
    • Add support for MQTT authentication
  • opencv
    • Switching to use main fork of OpenCV
    • Some minor bugfixes related to face tracking

0.11.0

  • Support for Golang 1.6
  • Determine I2C adaptor capabilities dynamically to avoid use of block I/O when unavailable
  • chip
    • Add support for GPIO & I2C interfaces on C.H.I.P. $9 computer
  • leap motion
    • Add support additional "hand" and "gesture" events
  • mqtt
    • Support latest update to Eclipse Paho MQTT client library
  • raspberry pi
    • Proper release of Pi Blaster for PWM pins
  • bebop
    • Prevent event race conditions on takeoff/landing
  • i2c
    • Support added for new i2c device:
      • MCP23017 Port Expander
    • Bugfixes:
      • Correct init and data parsing for MPU-6050
      • Correct handling of errors and buffering for Wiichuk

0.10.0

  • Refactor core to cleanup robot initialization and shutdown
  • Remove unnecessary goroutines spawned by NewEvent
  • api
    • Update Robeaux to v0.5.0
  • bebop
    • Add support for the Parrot Bebop drone
  • keyboard
    • Add support for keyboard control
  • gpio
    • Support added for 10 new Grove GPIO devices:
      • Grove Touch Sensor
      • Grove Sound Sensor
      • Grove Button
      • Grove Buzzer
      • Grove Led
      • Grove Light Sensor
      • Grove Vibration Sensor
      • Grove Rotary
      • Grove Relay
      • Grove Temperature Sensor
  • i2c
    • Support added for 2 new Grove i2c devices:
      • Grove Accelerometer
      • Grove LCD with RGB backlit display
  • docs
    • Many useful fixes and updates for docs, mostly contributed by our wonderful community.

0.8.2

  • firmata
    • Refactor firmata adaptor and split firmata protocol implementation into sub client package
  • gpio
    • Add support for LIDAR-Lite
  • raspi
    • Add PWM support via pi-blaster
  • sphero
    • Add ConfigureLocator, ReadLocator and SetRotationRate

0.8.1

  • spark
    • Add support for spark Events, Functions and Variables
  • sphero
    • Add SetDataStreaming and ConfigureCollisionDetection methods

0.8

  • Refactor core, gpio, and i2c interfaces
  • Correctly pass errors throughout packages and remove all panics
  • Numerous bug fixes and performance improvements
  • api
    • Update robeaux to v0.3.0
  • firmata
    • Add optional io.ReadWriteCloser parameter to FirmataAdaptor
    • Fix thread exhaustion error
  • cli
    • generator
      • Update generator for new adaptor and driver interfaces
      • Add driver, adaptor and project generators
      • Add optional package name parameter

0.7.1

  • opencv
    • Fix pthread_create issue on Mac OS

0.7

  • Dramatically increased test coverage and documentation
  • api
    • Conform to the cppp.io spec
    • Add support for basic middleware
    • Add support for custom routes
    • Add SSE support
  • ardrone
    • Add optional parameter to specify the drones network address
  • core
    • Add Once(e *Event, f func(s interface{}) Event function
    • Rename Expect to Assert and add Refute test helper function
  • i2c
    • Add support for MPL115A2
    • Add support for MPU6050
  • mavlink
    • Add support for common mavlink messages
  • mqtt
    • Add support for mqtt
  • raspi
    • Add support for the Raspberry Pi
  • sphero
    • Enable stop on sphero disconnect
    • Add Collision data struct
  • sysfs
    • Add generic linux filesystem gpio implementation

0.6.3

  • Add support for the Intel Edison

0.6.2

  • cli
    • Fix typo in generator
  • leap
    • Fix incorrect Port reference
    • Fix incorrect Event name
  • neurosky
    • Fix incorrect Event names
  • sphero
    • Correctly format output of GetRGB

0.6.1

  • cli
    • Fix template error in generator

0.6

  • api
    • Add robeaux support
  • core
    • Refactor Connection and Device
    • Connections are now a collection of Adaptors
    • Devices are now a collection of Drivers
    • Add Event(string) function instead of Events[string] for retrieving Driver event
    • Add AddEvent(string) function to register an event on a Driver
  • firmata
    • Fix slice bounds out of range error
  • sphero
    • Fix issue where the driver would not halt correctly on OSX

0.5.2

  • beaglebone
    • Add DirectPinDriver
    • Ensure slots are properly loaded

0.5.1

  • core
    • Add Version() function for Gobot version retrieval
  • firmata
    • Fix issue with reading analog inputs
    • Add data event for AnalogSensorDriver

0.5

  • Idomatic clean up
  • Removed reflections throughout packages
  • All officially supported platforms are now in ./platforms
  • API is now a new package ./api
  • All platforms examples are in ./examples
  • Replaced martini with net/http
  • Replaced ginkgo/gomega with system testing package
  • Refactor gobot/robot/device commands
  • Added Event type
  • Replaced Master type with Gobot type
  • EveryandAfternow accepttime.Duration`
  • Removed reflection helper methods