6bf5b3a532
#700 - Avoid to close the connection.
...
Each spi drivers must not close the connection: it's not its responsibility.
Robots should close the connection.
Signed-off-by: Eithel <tux.eithel@gmail.com>
2020-01-14 07:27:23 +01:00
d73466a5f9
Apa102 use default brightness ( #671 )
...
* spi/apa102: use uint8 type with a max of 31 for brightness
Signed-off-by: Erwan Morvan <air1bzz@gmail.com>
2019-05-31 11:34:00 +02:00
ee68549f94
spi: correct param used for APA102 Draw() method
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2019-05-22 11:34:39 +02:00
78ec92af7a
Stop using Red parameter for brightness value
...
This change corrects using Red parameter of RGBA for the Brightness value, to using the Alpha parameter of RGBA.
As the brightness max value for APA102 is `31` the `math.Min` stops the driver from using any value higher than 31.
2019-05-22 11:34:39 +02:00
1d76ed6ce0
spi: add ShowImage() function to ssd1306 driver based on @mikegleasonjr suggestion
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-08-07 21:58:43 +02:00
7bbdeee01f
Bump periph.io/x/periph to v3.0.0
...
There was one breaking change in the spi.Port and spi.Conn interfaces.
As I ran "dep ensure" with dep v0.4.1, it decided to reformat the Gopkg.lock
file. :/
2018-07-03 09:29:15 -04:00
e9529e4c72
spi: remove unneeded type and cleanup GoDocs
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-04-16 13:29:35 +02:00
06d26b4102
spi: remove unneeded code as suggested by @maruel
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-04-16 09:56:17 +02:00
f0b524efbf
spi: update README to mention new periph.io implementation.
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-04-12 12:51:39 +02:00
25930107fd
spi: add optional params such as bus/chip to all current drivers
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-04-12 12:25:39 +02:00
7637d90440
spi: switch to using periph.io for SPI interfaces
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2018-04-12 12:25:39 +02:00
447175629b
added spi ssd1306
2018-04-12 12:25:39 +02:00
c10828baf9
spi: Add MCP3202, MCP3204, MCP3208, and MCP3304 drivers to README
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 20:10:22 +01:00
b0160105ca
spi: Add MCP3202, MCP3204, MCP3208, and MCP3304 drivers
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 20:08:31 +01:00
6f2921ffb6
spi: add MCP3002 A/D converter
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 16:40:44 +01:00
41a04f76d0
spi: correct support for MCP3004/MCP3008 A/D converters
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 15:40:38 +01:00
55d3655d29
spi: add support for MCP3008 A/D converter
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 15:20:20 +01:00
2e7e59b1ce
spi: add support for MCP3004 A/D converter
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 15:20:07 +01:00
71ca8ed02f
apa102: adding initial support for APA102 LEDs, thanks to code sample from @rakyll
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 14:12:30 +01:00
8e28bcc54f
up2: extract shared SPI init code into spi package
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-12-13 13:16:50 +01:00
019300cb34
docs: some helpful edits for the initial spi implementation
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-09-14 14:05:51 +02:00
d362e47874
Remove address from spi code
2017-09-12 00:51:01 -06:00
4bd3b675c6
Moved gopigo3 to a platform
2017-09-06 23:53:28 -06:00
94f5ded2d6
First cut of the GoPiGo3 driver, lacking grove peripherals.
2017-08-24 23:38:26 -06:00
Eithel