OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
45,548 Commits 18 Branches 185 Tags 383 MiB
Commit Graph

45548 Commits

Author SHA1 Message Date
naveen e3bfdf7115 chore: Included githubactions in the dependabot config 
This should help with keeping the GitHub actions updated on new releases. This will also help with keeping it secure.

Dependabot helps in keeping the supply chain secure https://docs.github.com/en/code-security/dependabot

GitHub actions up to date https://docs.github.com/en/code-security/dependabot/working-with-dependabot/keeping-your-actions-up-to-date-with-dependabot

https://github.com/ossf/scorecard/blob/main/docs/checks.md#dependency-update-tool
Signed-off-by: naveen <172697+naveensrinivasan@users.noreply.github.com>
 2022-06-19 11:43:10 +08:00
chao.an fbddae8813 wireless/bcm43xxx: add customized MAC address support 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 10:13:23 +08:00
chao.an e498e5308a wireless/bcm43xxx: handle disassoc correctly 
1. use WLC_DISASSOC to deal disconnect event
2. carrier net device status

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-18 19:43:13 +08:00
chao.an e6a23e7b8a wireless/bcm43xxx: sort scan result by rssi 
1. Replace SCAN_RESULT_SIZE to SCAN_RESULT_ENTRIES
2. filter scan result with better rssi
3. Sort scan result by rssi

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-18 19:42:30 +08:00
Adam Kaliszan 615a296b30 Eps32 Lilygo t5v2 BSP 
E-ink display is working
 2022-06-18 08:03:45 +03:00
Alan Carvalho de Assis e87a20e648 Add documentation to ESP32-S3 boards 2022-06-17 17:14:10 -03:00
Xiang Xiao 0de089e2e8 wireless/bcm43xxx: Don't call bcmf_board_setup_oob_irq in bcmf_sdio_thread 
since oob irq is already setup in bcmf_bus_setup_interrupts, it waste
time and energy to do the same thing repeatly in the work thread.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-17 20:12:41 +08:00
chao.an 2992b10fbb wireless/bcm43xxx: add more ioctl command support 
Support command:
  SIOCGIWFREQ
  SIOCGIWMODE
  SIOCSIWAP
  SIOCGIWAP
  SIOCGIWESSID
  SIOCGIWRATE
  SIOCGIWTXPOW
  SIOCGIWSENS
  SIOCGIWRANGE

Before:                                    After:
 cp> wapi show wlan0                          cp> wapi show wlan0
 wlan0 Configuration:                         wlan0 Configuration:
        IP: 192.168.31.202                           IP: 192.168.31.202
   NetMask: 255.255.255.0                       NetMask: 255.255.255.0
 ioctl(SIOCGIWFREQ): 88                       Frequency: 5785
 ERROR: wapi_get_freq() failed: -88                Flag: WAPI_FREQ_AUTO
 ioctl(SIOCGIWESSID): 88                        Channel: 157
 ERROR: wapi_get_essid() failed: -88          Frequency: 5785
 ioctl(SIOCGIWMODE): 88                           ESSID: archer5
 ERROR: wapi_get_mode() failed: -88                Flag: WAPI_ESSID_ON
 ioctl(SIOCGIWAP): 88                              Mode: WAPI_MODE_MANAGED
 ERROR: wapi_get_ap() failed: -88                    AP: ec:41:18:e0:76:7f
 ioctl(SIOCGIWRATE): 88                         BitRate: 58500
 ERROR: wapi_get_bitrate() failed: -88             Flag: WAPI_BITRATE_FIXED
 ioctl(SIOCGIWTXPOW): 88                        TxPower: 31
 ERROR: wapi_get_txpower() failed: -88             Flag: WAPI_TXPOWER_DBM
 ioctl(SIOCGIWSENS): 25                           Sense: -17

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-17 18:27:12 +08:00
chao.an 9c68064024 wireless/bcm43xxx: add status print on bcmf_wl_auth_event_handler() 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-17 16:17:01 +08:00
Jukka Laitinen 1c8a661c9f boards/risc-v/mpfs/m100pfsevp/include/board_liberodefs.h: Update memory initialization parameters 
Sync some of the AXI configuration and DDR training parameters with the manufacturer's
defaults.

The TIP_CFG parameter correction helps with DDR training failures on some individual boards
The AXI end address values fix early random crash in power-on boot on some individual boards

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-06-17 15:40:21 +08:00
naveen 155c9a2070 chore: Set permissions for GitHub actions 
Restrict the GitHub token permissions only to the required ones; this way, even if the attackers will succeed in compromising your workflow, they won’t be able to do much.

- Included permissions for the action. https://github.com/ossf/scorecard/blob/main/docs/checks.md#token-permissions

https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#permissions

https://docs.github.com/en/actions/using-jobs/assigning-permissions-to-jobs

[Keeping your GitHub Actions and workflows secure Part 1: Preventing pwn requests](https://securitylab.github.com/research/github-actions-preventing-pwn-requests/)

Signed-off-by: naveen <172697+naveensrinivasan@users.noreply.github.com>
 2022-06-17 08:33:40 +03:00
Charles Cross d12e2778a5 Adds device descriptor for the MB5RS2MTA 256KB FRAM part 2022-06-17 09:57:56 +08:00
Xiang Xiao 22548d71eb drivers/syslog: reuse rmutex_t for the recursive check 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-16 19:01:49 +03:00
Satoshi Togawa a9ad1a336b usbhost_cdcacm: fix error with interrupt IN endpoint. 2022-06-16 19:01:17 +03:00
chao.an e2c154dffe wireless/bcm43xxx: configurable buffer size of escan result 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 23:36:40 +08:00
chao.an 29dd12283c wireless/bcm43xxx: replace all busy delay to nxsig_usleep 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 23:02:09 +08:00
chao.an 591942f69b mmcsd/sdio: correct return value of sdio_probe() 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 22:48:21 +08:00
Alan Carvalho de Assis 4eddde90b0 esp32s3: Add support to USBSERIAL to use as console 2022-06-16 17:20:32 +03:00
Alan Carvalho de Assis faa1c3a74c esp32s3: Add basic support to ESP32-S3-EYE 2022-06-16 17:20:32 +03:00
Satoshi Togawa 9f4691603f sama5: Fix wrong comments. 2022-06-16 17:04:37 +03:00
Xiang Xiao 7a739851aa include/cxx: Remove all non standard c++ header files 
All standard header files can check here:
https://en.cppreference.com/w/cpp/header

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-16 15:42:45 +03:00
Jukka Laitinen d8cc1fd76d arch/riscv/mpfs: Add a config flag to select SD mux state 
This has been previously hard-coded to SD-card. Make it build time configurable.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-06-16 09:17:30 -03:00
chao.an 7790839eb0 arch/backtrace: correct the skip counter 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 21:09:14 +09:00
chao.an b33a709213 wireless/bcm43xxx: improve throughput of net driver 
1. Wake up tx if there is data alreay to sent after rx update
2. Try tx queue again after every data frame sent

iperf test:

```
TCP RX  4M->16M
⁣TCP TX  2M->14M
⁣UDP RX 18M->26M
UDP TX  2M->18M
```

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 21:08:28 +09:00
chao.an 669fb83706 net/tcp(buffered): retransmit only one the earliest not acknowledged segment 
Retransmit only one the earliest not acknowledged segment
(according to RFC 6298 (5.4)). The issue is the same as it was
in tcp_send_unbuffered.c and tcp_sendfile.c.

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 18:14:29 +08:00
Xiang Xiao f75f100954 bcm43xxx: Remove bcmf_txavail_work and resue bcmf_tx_poll_work 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-16 09:13:16 +03:00
Petro Karashchenko b343a42e8c nuttx/lib: remove dependency on BUILD_FLAT for library memory allocation interface 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-06-15 16:58:34 -03:00
Abdelatif Guettouche 996995245d xtensa: Remove old references to co-processors. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 22:06:08 +03:00
chao.an 6d85e9b320 wireless/bcm43xx: replace sem_wait to uninterruptible version 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 02:44:47 +08:00
chao.an 0951d859d3 wireless/bcm43xxx: configurable schedule priority of daemon thread 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 01:41:50 +08:00
chao.an 4712307ecc wireless/bcm43xxx: fix typo sq_init() -> dq_init() 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-16 01:40:41 +08:00
Abdelatif Guettouche db8b32cb07 boards/esp32: Increase the NTP deamon stack size as it was overflowing. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 13:07:28 -03:00
Abdelatif Guettouche 9bac291236 arch/xtensa/*.S: Remove some old comments and fix others. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche fe8fa4ff75 arch/xtensa: Move the new saving area directly to A2. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche 5ab888692e arch/xtensa/xtensa_context: Place the functions in EXCEPTION_HANDLER 
section (IRAM for ESP32xx chips).

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche 73a1e0fc58 arch/xtensa: Refactor exceptions' entry and exit. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche 1c94cb5324 arch/xtensa: Refactor the differences in ABI calls. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche 48f20af8bc arch/xtensa/xtensa_int_handlers.S: Remove unused macro. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche fc22eddc38 arch/xtensa: Refactor the code that's used to get the pre-exception 
backtrace.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
Abdelatif Guettouche 05d412f6b5 arch/xtensa/xtensa_user_handler.S: Use the ps_setup macro when possible. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 18:07:51 +03:00
chao.an e75c88df5b wireless/bcm43xxx: load nvram from file system 
added an option to load nvram from file system, which will help developers
easily to tuning the firmware parameters without compile firmware.

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-15 22:19:02 +08:00
Juha Niskanen 449cf4d076 getrandom: fix comment contradicting code 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2022-06-15 11:18:04 -03:00
Abdelatif Guettouche 0aa14f91da arch/xtensa/esp32_rtc_lowerhalf.c: nitialize ret variable to avoid 
warnings.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-06-15 21:29:55 +08:00
Eero Nurkkala 5683e020e8 risc-v/mpfs: update clock configuration parameters 
Update PLL configuration parameters to match the values provided
by the vendor.

Also remove extra call to mpfs_pll_config() as it's already called
at mpfs_clockconfig().

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2022-06-15 21:29:45 +08:00
Michał Łyszczek 4d4566e9ed nucleo-wl55jc: add partition table support for progmem FLASH 
This patch adds working integration of progmem FLASH. User can partition
internal FLASH memory to up to 4 partitions and use any combination of
raw, nxffs, smartfs and mtd_config filesystems (unless there are other
limitations like nxffs supports only single instance).

Support for dual CPU is added to Kconfig to not overwrite CPU2 program code.

Code guards user to not allocate more memory than there is on FLASH, and
warns user if not all FLASH memory is used. Errors will be printed when
user tries to initialize two instances of nxffs or mtd_config filesystems.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
 2022-06-15 20:29:17 +08:00
Michał Łyszczek 5490f8964f stm32wl5: add support for internal FLASH 
This patch adds corrected implementation of FLASH memory to be used
with progmem driver for use with mtd filesystems like nxffs or smartfs.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
 2022-06-15 20:29:17 +08:00
chao.an 845e259ac7 net/tcp: d_appdata should remove the tcp specific option field 
applicate data field should not touch data of IP layer

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-15 20:28:10 +08:00
chao.an f6b8cc1407 wireless/bcm430xx: rename chip minor id to 'x' 
rename 4301x chip minor id to 'x' to compatible more versions of variant of bcm430xx

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-15 02:01:37 +08:00
chao.an 4659e00fac wireless/bcm43xxx: add extended join parameters 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-15 00:56:31 +08:00
chao.an 28b46bd381 wirless/sdio: frame length should with guard bound 
some SDIO device will return the larger frames out of bound

error log:
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-14 18:31:22 +03:00