88b79d305f
Update ChangeLog
2016-05-10 11:14:27 -06:00
f4fa4799f7
Add a driver for SST26F spi/qspi flash devices (SPI mode only)
2016-05-10 11:09:15 -06:00
f69b7d41db
Merged in young-mu/nuttx/developing (pull request #15 )
...
Fix a bug of GPIO falling-edge interrupt for tiva
2016-05-08 01:40:56 -06:00
5e9b1c615f
Merged in paulpatience/nuttx/userleds (pull request #13 )
...
userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions
2016-05-08 01:37:31 -06:00
5c1c5079ea
Cosmetic changes from review of last PR
2016-05-08 01:40:31 -06:00
0143b3869a
Merged in ziggurat29/nuttx/stm32l4_update_rtc_impl (pull request #14 )
...
Stm32l4_update_rtc_impl
2016-05-08 01:24:09 -06:00
863db15b56
Fix a bug of GPIO falling-edge interrupt for tiva
2016-05-08 13:54:51 +08:00
523591736f
trivial; enable the 'alarms' example app in the STL32L4-disco config, since it is now working
2016-05-07 12:24:15 -05:00
1e5910a99d
update nucleo l476 config and code to support the RTC and the alarms functionality
2016-05-07 12:03:18 -05:00
48fc8b9dd7
problem with resetting backup domain clears clocking options set up before in *rcc.c
...
use INITS flag to avoid magic reg value to detect power up reset state of rtc
correct a problem clearing interrupt flags (they weren't) which prevented an alarm from ever being used more than once per reset cycle
2016-05-07 11:35:08 -05:00
6d03f132a1
Fix some typos in ChangeLog
2016-05-06 04:56:25 -06:00
78b10bdf0e
tools/export.sh: If MAKE not defined use 'which make'. Update README from last change.
2016-05-06 04:49:25 -06:00
443bf7fc93
Update ChangeLog
2016-05-06 04:47:35 -06:00
da1fc98a51
Fix a copy and paste error concerning the CAN driver. In the file sam_matrix.h the define SAM_MATRIX_CAN0_OFFSET is set to the wrong value.
...
Error is only triggered if the global variable g_mcan0_msgram is located in RAM at an address beyond 0x20400000 + 0x0000ffff. In this case all send CAN messages have the length zero and the CAN-ID is zero as well.
2016-05-06 04:02:28 -06:00
050f544782
Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems.
2016-05-05 11:30:47 -06:00
4e57c36a8c
when setting an alarm, ensure that the respective alarm triggered flag is reset, because the alarms are edge-triggered interrupts
2016-05-05 11:47:58 -05:00
0d659de226
fix nasty bug in ISR handler, where interrupt was not properly acknowleged (write to CR instead of ISR, as intended). Also, minor, set the LSI prescaler values more appropriately (though not critical since LSI is so low precision anyway).
2016-05-05 11:39:19 -05:00
dfff78d7ab
userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions
2016-05-05 12:29:43 -04:00
e0371de24d
correct the RTC_ALRMR_ENABLE value, it needs to ignore the date/dow component since that is not set. Also, the prescaler value for HSE (which presumes 1 MHz, anyway) had transposed digits.
2016-05-05 11:28:41 -05:00
67b1f89159
address thread safety in lower half driver with a driver mutex acquired/released in public api
2016-05-05 11:22:09 -05:00
273680a6e9
update RTC implementation to include the various alarm related stuff recently added to STM32 arch
2016-05-05 11:16:00 -05:00
f4ac5f38ce
Merge branch 'master' of https://bitbucket.org/nuttx/nuttx
2016-05-05 03:41:13 -06:00
aecc033131
Pass toplevel make to the script to allow -j greater than 1
2016-05-05 03:40:16 -06:00
c31ec6bdad
Merged in paulpatience/nuttx/uavcan (pull request #12 )
...
UAVCAN: Update version
2016-05-05 03:23:26 -06:00
331e98684d
Merged in ziggurat29/nuttx/stm32l4_uid (pull request #11 )
...
add unique id function to arch, modded board to support unique id boardctl
2016-05-05 03:22:25 -06:00
e6e2552a12
UAVCAN: Update version
2016-05-03 17:18:57 -04:00
dedcbeba2e
add unique id function to arch, modded board to support unique id boardctl
2016-05-03 11:09:23 -05:00
4072d4b1b5
Merged nuttx/nuttx into master
2016-05-01 08:12:53 -05:00
a95e426d35
Costmetic changes from last PR
2016-04-30 09:04:38 -06:00
696ea25c75
Merged in ziggurat29/nuttx/extended_clock_work (pull request #10 )
...
support for HSE and MSI clock sources; prelude to USB
2016-04-30 08:49:49 -06:00
8d92669404
Merged in ziggurat29/nuttx/mem_rgn_sanity (pull request #9 )
...
booboo in config sanity check; wasn't preventing insanity
2016-04-30 08:46:42 -06:00
2fe0565437
added support for HSE and MSI clocks, and auto trim of MSI to LSE (needed for USB).
2016-04-29 22:13:32 -05:00
31870b22f5
booboo in config sanity check; wasn't preventing insanity
2016-04-29 07:29:17 -05:00
972181697a
fs_mount.c edited online with Bitbucket. Fix problem noted by David Sidrane.
2016-04-29 07:11:42 +00:00
b3ba0858f1
Merged nuttx/nuttx into master
2016-04-28 07:29:57 -05:00
61fbef5727
Costmetic changes from review or PR
2016-04-28 02:39:27 -06:00
af9733b1e6
Merged in ziggurat29/nuttx/stm32l4_memmap_boardctl (pull request #8 )
...
stm32l4-disco boardctls for qspi memmap; bugs found along the way
2016-04-28 02:19:33 -06:00
ecba6ad0db
fs_procfsproc.c edited online with Bitbucket. Fix problem introduced in last patch
2016-04-28 08:04:38 +00:00
97ea667a7a
refresh defconfig
2016-04-27 19:51:49 -05:00
2bfb326994
add board ioctls for allowing user application to cause qspi memory mapped mode to be engaged and disengaged. Also partitioned qspi flash for filesystem and other purposes (eventually xip).
2016-04-27 19:36:43 -05:00
05df5a0336
booboo in previous commit 6a6a089 whereby a printf statement was botched, breaking build
2016-04-27 19:35:10 -05:00
d3fbd86657
bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid.
2016-04-27 19:33:45 -05:00
ac6d2a301b
Merged nuttx/nuttx into master
2016-04-27 09:13:51 -05:00
48f66c15c1
Merge branch 'master' of https://bitbucket.org/nuttx/nuttx
2016-04-27 00:19:22 -06:00
6a6a089af4
Fix a warning
2016-04-27 00:19:00 -06:00
5c25e18005
Merged in ziggurat29/nuttx/SRAM2featurettes (pull request #7 )
...
add configuration options to allow SRAM2 to be used for heap, or not at all, and to zero-init it on OS start, or not at all.
2016-04-26 23:48:17 -06:00
31e7f6fd00
add configuration options to allow SRAM2 to be used for heap, or not at all, and to zero-init it on OS start, or not at all.
2016-04-26 10:12:13 -05:00
1218ee5f51
bug in binding peripheral to dma channel; inverted sense of a bitmask
2016-04-25 10:27:02 -05:00
cb15ec1d9b
Merged nuttx/nuttx into master
2016-04-25 09:38:22 -05:00
2d3529294e
Merged in ziggurat29/nuttx/stm32l4_qspi_005 (pull request #6 )
...
QSPI DMA support in STM32L4, and DMA fixes...
2016-04-24 16:53:33 -06:00
Gregory Nutt