"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_removeblocked.c", line 58: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = btcb->task_state;
"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_setpriority.c", line 243: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = tcb->task_state;
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
When a low-priority thread sends a kill signal to a high-priority thread,
the high-priority thread will exit and release tcb. When the thread returns
to the low-priority thread, it will access the released stcb.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
Regression by:
| commit 2ee8aa6f2b
| Author: hujun5 <hujun5@xiaomi.com>
| Date: Thu Jan 11 11:27:31 2024 +0800
|
| sched: we use spin_lock_irqsave replace enter_critical_section to protect g_irqvector
|
| enter_critical_section may be called before os initialized
|
| Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: chao an <anchao@lixiang.com>
Two things need to be done when vfork'ing:
- Must attach to parent's address environment (the addrenv is shared)
- Must allocate a kernel stack (where would the register context go otherwise)
Note that this code assumes the address environment is shared, since we
don't support fork() which would _clone_ the address environment instead.
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
* sched/Kconfig
(INIT_ENTRYPOINT): Document that the signature of "main" must take
"argc" and "argv" or else compilation error results, as discussed in
the email thread below [1].
References:
[1] dev@nuttx.apache.org email thread:
"basically, I get an error when I do make" started 18 Jul 2024,
archived:
https://lists.apache.org/thread/9j2s3647ysdhy204g4ombn4o09bn11c1
and elsewhere.
because 'g_cpu_nestcount[me] > 0' will never happen, in this place
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add support for XSAVE/XRSTOR to handle x86_64 procesor extended states.
Support for these instructions is required to support AVX instruction set
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Kthreads can share the group data so that to reduce overheads.
This implements shared kthread group via:
- use `tcb_s` instead of `task_tcb_s` for kthreads
- use `g_kthread_group` when creating kthreads
- use stackargs to start tasks and kthreads
see pull/12320 for test logs.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Thread args have already been saved to stack after the TLS section by
nxtask_setup_stackargs. This is to retrieve it for use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds pre-allocation and dynamic allocations for sigactions.
Current behavior can be acheived by setting SIG_ALLOC_ACTIONS to
a number larger than 1.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
this_task() is a function call that involves disabling interrupts and this_cpu().
Since restore_critical_section is always called in an interrupt-disabled context,
there's no need to disable interrupts again. Therefore, to save time and achieve
the same effect, I directly call tcb = current_task(me) instead of tcb = this_task().
Signed-off-by: hujun5 <hujun5@xiaomi.com>
we can use g_cpu_lockset to determine whether we are currently in the scheduling lock,
and all accesses and modifications to g_cpu_lockset, g_cpu_irqlock, g_cpu_irqset
are in the critical section, so we can directly operate on it.
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
waitpid() cannot be used in kernel mode unless SCHED_HAVE_PARENT is
selected -> add dependency if BUILD_KERNEL is selected.
Why? Because without SCHED_HAVE_PARENT waitpid() works in a non-standard
way, meaning it does not use SIGCHLD to wake the parent, as it should.
Also, returning the child status via stat_loc corrupts memory as stat_loc
points to the parent's address environment:
pid_t nxsched_waitpid(pid_t pid, int *stat_loc, int options)
{
...
group->tg_statloc = stat_loc;
...
}
And later when the status is returned, the child writes to tg_statloc,
which points to the parent's address environment -> random memory
corruption:
static inline void nxtask_exitwakeup(FAR struct tcb_s *tcb, int status)
{
...
if (group->tg_statloc != NULL)
{
*group->tg_statloc = status << 8;
}
...
}
This log appears for NSH internal commands in KERNEL build and
duplicates a lot with task_spawn: log. So drop it to make the
DEBUG_SCHED_INFO logging more readable.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
yanghuatao