OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Fix Kconfig style 

Remove spaces from Kconfig files
Remove TABs
Add comments
This commit is contained in:
simbit18 2024-04-08 16:21:13 +02:00 committed by Xiang Xiao
parent c0d7419d11
commit 9967989b02
7 changed files with 43 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/imxrt/Kconfig
View File

@ -2613,7 +2613,7 @@ config IMXRT_SRAM_HEAPOFFSET
Used to reserve memory at the beginning of SRAM for, as an example,
a framebuffer.
endmenu # i.MX RT Heap Configuration
endmenu # i.MX RT Heap Configuration
config IMXRT_FLEXRAM_PARTITION
bool "Set FlexRAM Paritioning"

10
arch/arm/src/sama5/Kconfig
View File

@ -1108,16 +1108,16 @@ choice
default SAMA5D2_CLASSD_PWM_TRAILING
---help---
TRAILING EDGE: The signal is single-ended.
If bit NON_OVERLAP is cleared, the signal is sent to
If bit NON_OVERLAP is cleared, the signal is sent to
CLASSD_L0 and CLASSD_R0.
If bit NON_OVERLAP is set, the signal is sent to
CLASSD_L0/L1 and CLASSD_R0/R1.
UNIFORM: The signal is differential.
If bit NON_OVERLAP is cleared, the signal is sent to
If bit NON_OVERLAP is cleared, the signal is sent to
CLASSD_L0/L2 and CLASSD_R0/R2.
If bit NON_OVERLAP is set, the signal is sent to
If bit NON_OVERLAP is set, the signal is sent to
CLASSD_L0/L1/L2/L3 and CLASSD_R0/R1/R2/R3.
config SAMA5D2_CLASSD_PWM_TRAILING
@ -1245,8 +1245,8 @@ config SAMA5D2_CLASSD_MONO
default 0
---help---
Disabled. The signal is sent stereo to the left and right channels.
Enabled. The same signal is sent on both left and right channels.
The sent signal is defined by the MONOMODE field value.
Enabled. The same signal is sent on both left and right channels.
The sent signal is defined by the MONOMODE field value.
choice
prompt "Mono Mode Selection (MONOMODE)"

56
arch/risc-v/Kconfig
View File

@ -328,7 +328,7 @@ config ARCH_CHIP_RISCV_CUSTOM
---help---
Select this option if there is no directory for the chip under arch/risc-v/src/.
endchoice
endchoice # RISC-V chip selection
config ARCH_RV32
bool
@ -389,35 +389,35 @@ config ARCH_RV_ISA_VENDOR_EXTENSIONS
config ARCH_RV_MMIO_BITS
int
# special cases
default 32 if ARCH_CHIP_K230
default 32 if ARCH_CHIP_K230
# general fallbacks
default 32 if ARCH_RV32
default 64 if ARCH_RV64
default 32 if ARCH_RV32
default 64 if ARCH_RV64
config ARCH_FAMILY
string
default "rv32" if ARCH_RV32
default "rv64" if ARCH_RV64
default "rv32" if ARCH_RV32
default "rv64" if ARCH_RV64
config ARCH_CHIP
string
default "fe310" if ARCH_CHIP_FE310
default "k210" if ARCH_CHIP_K210
default "litex" if ARCH_CHIP_LITEX
default "bl602" if ARCH_CHIP_BL602
default "esp32c3-legacy" if ARCH_CHIP_ESP32C3
default "esp32c3" if ARCH_CHIP_ESP32C3_GENERIC
default "esp32c6" if ARCH_CHIP_ESP32C6
default "esp32h2" if ARCH_CHIP_ESP32H2
default "c906" if ARCH_CHIP_C906
default "mpfs" if ARCH_CHIP_MPFS
default "rv32m1" if ARCH_CHIP_RV32M1
default "qemu-rv" if ARCH_CHIP_QEMU_RV
default "hpm6000" if ARCH_CHIP_HPM6000
default "hpm6750" if ARCH_CHIP_HPM6750
default "jh7110" if ARCH_CHIP_JH7110
default "bl808" if ARCH_CHIP_BL808
default "k230" if ARCH_CHIP_K230
default "fe310" if ARCH_CHIP_FE310
default "k210" if ARCH_CHIP_K210
default "litex" if ARCH_CHIP_LITEX
default "bl602" if ARCH_CHIP_BL602
default "esp32c3-legacy" if ARCH_CHIP_ESP32C3
default "esp32c3" if ARCH_CHIP_ESP32C3_GENERIC
default "esp32c6" if ARCH_CHIP_ESP32C6
default "esp32h2" if ARCH_CHIP_ESP32H2
default "c906" if ARCH_CHIP_C906
default "mpfs" if ARCH_CHIP_MPFS
default "rv32m1" if ARCH_CHIP_RV32M1
default "qemu-rv" if ARCH_CHIP_QEMU_RV
default "hpm6000" if ARCH_CHIP_HPM6000
default "hpm6750" if ARCH_CHIP_HPM6750
default "jh7110" if ARCH_CHIP_JH7110
default "bl808" if ARCH_CHIP_BL808
default "k230" if ARCH_CHIP_K230
config ARCH_RISCV_INTXCPT_EXTENSIONS
bool "RISC-V Integer Context Extensions"
@ -498,7 +498,7 @@ config RISCV_TOOLCHAIN_GNU_RV32
This option should work for any modern GNU toolchain (GCC 5.2 or newer)
configured for riscv32-unknown-elf.
endchoice
endchoice # Toolchain Selection
config RISCV_SEMIHOSTING_HOSTFS
bool "Semihosting HostFS"
@ -517,7 +517,7 @@ config RISCV_SEMIHOSTING_HOSTFS_CACHE_COHERENCE
---help---
Flush & Invalidte cache before & after bkpt instruction.
endif
endif # RISCV_SEMIHOSTING_HOSTFS
if ARCH_CHIP_LITEX
@ -538,9 +538,9 @@ config LITEX_CORE_VEXRISCV_SMP
select ARCH_HAVE_S_MODE
select ARCH_HAVE_ELF_EXECUTABLE
endchoice
endchoice # LITEX Core Selection
endif
endif # ARCH_CHIP_LITEX
source "arch/risc-v/src/opensbi/Kconfig"
source "arch/risc-v/src/nuttsbi/Kconfig"
@ -596,4 +596,4 @@ endif
if ARCH_CHIP_K230
source "arch/risc-v/src/k230/Kconfig"
endif
endif
endif # ARCH_RISCV

4
arch/x86_64/Kconfig
View File

@ -107,8 +107,8 @@ config MULTBOOT2_FB_TERM
bool "Multiboot2 framebuffer terminal"
default n
depends on NXFONTS
---help---
Enable a framebuffer terminal for early debug printing
---help---
Enable a framebuffer terminal for early debug printing
endif # ARCH_MULTIBOOT2

4
arch/xtensa/src/esp32s3/Kconfig
View File

@ -1884,10 +1884,10 @@ config ESP32S3_SPI_FLASH_SUPPORT_PSRAM_STACK
can do SPI Flash read/write/erase/map/unmap. Otherwise,
it may cause exception, the root cause is as following:
1. When operating SPI flash, cache is also disable,
then software can't access PSRAM by data cache.
then software can't access PSRAM by data cache.
2. SPI flash read/write/erase functions have instruction like
stack-pop and stack-push which may use stack buffer which is
PSRAM space or load/store temp variables which locate in PSRAM space too.
PSRAM space or load/store temp variables which locate in PSRAM space too.
3. Once operation in step 2 triggers, CPU will trigger exception.
So related SPI flash functions should be sent and run in tasks which use SRAM as task stack.

4
boards/Kconfig
View File

@ -3174,7 +3174,7 @@ config ARCH_BOARD
default "esp32s3-box" if ARCH_BOARD_ESP32S3_BOX
default "esp32c6-devkitc" if ARCH_BOARD_ESP32C6_DEVKITC
default "esp32c6-devkitm" if ARCH_BOARD_ESP32C6_DEVKITM
default "esp32h2-devkit" if ARCH_BOARD_ESP32H2_DEVKIT
default "esp32h2-devkit" if ARCH_BOARD_ESP32H2_DEVKIT
default "et-stm32-stamp" if ARCH_BOARD_ET_STM32_STAMP
default "tlsr8278adk80d" if ARCH_BOARD_TLSR8278ADK80D
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
@ -3443,7 +3443,7 @@ config ARCH_BOARD
default "xx3803" if ARCH_BOARD_XX3803
default "xx3823" if ARCH_BOARD_XX3823
default "s698pm-dkit" if ARCH_BOARD_S698PM_DKIT
default "hpm6360evk" if ARCH_BOARD_HPM6360EVK
default "hpm6360evk" if ARCH_BOARD_HPM6360EVK
default "hpm6750evk2" if ARCH_BOARD_HPM6750EVK2
default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI

6
drivers/mtd/Kconfig
View File

@ -496,7 +496,7 @@ config AT24XX_FREQUENCY
int "AT24xx I2C bus frequency"
default 100000
---help---
Set the I2C frequency to use when accessing the AT24CXX EEPROM.
Set the I2C frequency to use when accessing the AT24CXX EEPROM.
This value must represent a valid I2C speed (normally less than
400.000) or the driver might fail.
@ -509,7 +509,7 @@ config MTD_AT25EE
select MTD_BYTE_WRITE
---help---
Build support for SPI-based AT25xx type EEPROMs. MTD on EEPROM can
perform poorly, so it is possible only usable if the EEPROM has a
perform poorly, so it is possible only usable if the EEPROM has a
clock speed 10MHz or higher. EEPROMs that use the same commands as
the 25AA160 should work OK.
@ -525,7 +525,7 @@ choice
pages so that the file system block size is, say, 128, 256 or
512 bytes.
In any event, the block size *must* be an even multiple of the
In any event, the block size *must* be an even multiple of the
number of pages and, often, needs to be a factor 2.
This is up to the user to check!