board: esp32c3, esp32 and esp32s3 corrected PM block

removed depends on PM from if PM block

boards/risc-v/esp32c3-legacy/esp32c3-devkit/Kconfig

@@ -10,28 +10,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.
 

boards/xtensa/esp32/esp32-devkitc/Kconfig

@@ -10,28 +10,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.
 

boards/xtensa/esp32/esp32-pico-kit/Kconfig

@@ -10,28 +10,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.
 

boards/xtensa/esp32/ttgo_eink5_v2/Kconfig

@@ -10,28 +10,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.
 

boards/xtensa/esp32/ttgo_t_display_esp32/Kconfig

@@ -10,28 +10,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.
 

boards/xtensa/esp32s3/esp32s3-devkit/Kconfig

@@ -69,28 +69,24 @@ if PM
 config PM_ALARM_SEC
 	int "PM_STANDBY delay (seconds)"
 	default 15
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_ALARM_NSEC
 	int "PM_STANDBY delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.
 
 config PM_SLEEP_WAKEUP_SEC
 	int "PM_SLEEP delay (seconds)"
 	default 20
-	depends on PM
 	---help---
 		Number of seconds to wait in PM_SLEEP.
 
 config PM_SLEEP_WAKEUP_NSEC
 	int "PM_SLEEP delay (nanoseconds)"
 	default 0
-	depends on PM
 	---help---
 		Number of additional nanoseconds to wait in PM_SLEEP.