this patch define macro HDA_DAI_CONFIG(idx, link_id, name) for user to
define configurations for HDA Backend links.
Pleae note, there is not HW configurations defined for HDA BE links
because current HW configurations is more suitable for SSP BE links.
But the data tuple will carry the HDA type info for the link for kernel
driver to check the link type.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
The APL and GLK topologies are identical except for a swap of SSPs and MCLKs.
Tested on Reef and GLK
TODO:
1. there is currently a kernel bug where only duplex pipelines can be
assigned to the same PCM number. For now mark DMIC as device 99 to
track this is a work-around to be modified in the near future
2. Edit the Virtual routes/widgets to remove kernel warnings (no
functional impact)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
PR43 and commit dc10876c20 ('topology: changes to SectionPCM
macros') went a bit too far and removed a much-needed alignment
between pcm id and dummy dai id. Tested on APL/Reef Chromebook
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This patch addresses the following:
1. Move PCM_PLAYBACK_ADD to pcm.m4
The macro was in the wrong m4 file (buffer.m4)
2. Remove pipeline_id argument and "index" from SectionPCM
"index" is not a member of struct snd_soc_tplg_pcm. So this
information is not used in the kernel at all.
Secondly, the PCM ID could be associated with more than
one pipeline especially in the case of DUPLEX PCM's. So better
to remove it to avoid ambiguities.
3. Remove dai_id
This dai_id is the ID given to the CPU DAI when the FE DAI link
is created. In the case of SOF, we should use an linearly increasing
unique ID for CPU DAI ID's. If this argument is omitted, the kernel
automatially assignes an ID based on the component->num_dai
which is linearly incremented every time a new DAI link is added.
4. Finally update users to align with the new definitions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add DMIC capture pipeline for DMIC01 to the apl nocodec topology.
DMIC16k to be added later.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Previously it was set to be the dai index which works if there's
only one type of BE DAI's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
DAI_TYPE and DAI_INDEX are both needed to get the dai in FW, add
DAI_INDEX in SectionBE to make sure we can handle multiple type dais.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
For some reason parts of the topology were commented out. Make sure
all 6 SSPs are enabled.
Tested on Up2 with a LogicPro-based check on SSP5 (only interface
accessive on the HAT connector)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Remove DMIC support to avoid topology load fail,
Remove capture (not supported by PCM512x codec)
Simplify structure using PCM_PIPELINE_ADD instead of PCM_PIPELINE_DAI_ADD
Enable 24-bit output
Enable up to 32-bit PCM (tested with S16_LE and S32_LE)
Tested on Up2, no issues detected.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Codec SSP id doesn't match with machine driver, so
change the id to 1 to fix the topology loading issue.
Signed-off-by: Zhang Keqiao <keqiao.zhang@linux.intel.com>
Add a multi-stream topology for GLK with speaker on SSP1, headset on
SSP2 and DMIC. Only playback pipelines on SSP1/2 for now. Capture
pipelines to be added later.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
SSP5 id should be kept to 0 and new added DMIC goes to 1 to keep old
machine driver work with both old topology and this topology.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
For nocodec topology, we need the id to be same with SSP index since
all SSP ports are enabled in nocodec. Codec machine drivers always have
id to 0.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
This patch extends the allowed sample rate range to 8 - 192 kHz, and
channels count to 1 - 16. Previously only 48 kHz and 2 - 4 channels was
allowed.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch increases the SRC source buffer to contain 5 periods of data
(measured for 1 ms @ 48 kHz ). It fixes the issue in 176.4 kHz to 48 kHz
playback conversion that the pipeline freezes with insufficient available
data in source buffer for SRC to convert and too little free in buffer
for host to fill another 48 frames.
176.4 kHz playback is currently the largest buffer size consumer due
to non-steady in/out rate. The higher rate conversion 192 kHz to 48 kHz
can operate with smaller size buffer due to steady in/out rate.
Note: This has been only simulated in the host test bench since SRC
playback does not run currently in real devices due to another issue.
However since buffers simulation is accurate this should be a real issue.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch modifies the test topology generator to add dmic topologies
with pre-defined PDM controller configurations, sample rates and
formats.
It also modifies the DMIC_CONFIG macro to get the number of
active pdm from the pdm config.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add some pre-defined PDM controller configs that sets the
number of active controllers and the corresponding
pdm tuples.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Rename SAMPLE_BITS macro to a more generic CONFIG_DATA macro for SSP
to also include the mclk id.
Also modify users of the macro with the new name.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add SAMPLE_RATE token for tone comp.
Include it in tone definition and set it from the test pipeline definition.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Some platforms might have more than one MCLK's exposed. Add a token
that will allow specifying the MCLK ID to be used in such cases.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Mengdong Lin