Use comp_sample_bytes() to set DMA transfer size in DAI component and
comment why host always copies using word size transfers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
In most situations the DAI should not be stopped and the restarted on XRUNs,
e.g. upstream/downstream component XRUNs. This patch will keep the DAI
running in those circumstances.
There will be a subsequent patch that will allow for stopping and
restarting the DAI for XRUN's e.g. SSP XRUNs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Add an XRUN handler to notify components that an XRUN has occurred and
to take any remedial action. The pipeline itself will handle an XRUN by
re-preparing the components and then send start again from the pipeline
source component.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Fix the free/avail buffer calculations to make sure any overrun or underrun
is reported in trace and returned as a negative error in copy().
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Currently the preloader is bespoke and runs in the same context as
the IPC. This means some components may delay IPC and block other
components.
Reuse the existing pipeline copy() infrastructure so that the
preload is done after prepare() but before trigger() using the
same pipeline copy code on the same DSP core and context. i.e.
we preload a host buffer (for playback) and then schedule the
pipeline copy(s) after the preload IPC is done.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Use the new idle schedule API to schedule a pipeline copy for preload
after prepare() and before trigger(). This pipeline preload copy will
run within the same context as the regular pipeline copy.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Minimise any context switches in the scheduler by first checking for
any queued tasks in the task list prior to changing context. If there are
no queued tasks then there is no need to context switch.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Add an API to allow tasks to be added to the scheduler task list but not
run until the DSP enters an idle state. i.e. we schedule the task as normal
but dont immediately call schedule() to schedule that task for execution
and instead wait until schedule() is next called (at the end of some other
work).
This patch also calls schedule() before entering the idle state in the main
processing loop.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
The host ring buffer size may be not page aligned,
but the last page was utilized by host component
wrongly, which may introduce beating noise.
Here change to correct size for the last element,
which will fix the issue.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
This patch removes the channel map table lookup from all volume control
since it is not used by the SOF 1.0 driver. Instead of enum channel
descriptors the channels are addressed with indices in
0..<number of channels -1> range.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Clean-up register configurations for SSCR0..5, SSPSP, SFIFOTT
The results are ok in I2S and LEFT_J 24 bits
Tested with RT5645 and DA7212
TODO:
1. fix 16 bit issue (right channel lost)
2. test DSP modes
3. connect SSP and DMA watermarks
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cosmetic change, for some reason the register definition was not
sequential as in the data sheet
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Make sure all macro parameters are protected with parentheses to avoid
unintended expansion issues
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
The dma_sg_elem might be used uninitialized if the callback
function forget to do that.
Here adding initialization to fix that.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
1. "size" should not be considered twice.
2. Change host_offset to uint32_t type.
3. size = min(hsize, lsize), so it is unncessary to check ">"
for wrap local and host buffer.
Signed-off-by: Yan Wang <yan.wang@linux.intel.com>
Move it from ipc handler into platform_init().
It should be placed after IPC and DMAC initialization.
Signed-off-by: Yan Wang <yan.wang@linux.intel.com>
Replace the user-defined MAX and MIN values for 32-bit and 16-bit
with standard INTN_MAX/INTN_MIN macro
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This reverts commit 97addafa10.
git bisect tells me this is the source of IPC timeouts, 100% reproducible
[ 162.496099] sof-audio sof-audio: error: ipc timed out for 0x90010000 size 0x18
[ 162.496590] sof-audio sof-audio: error: cant set params for DMA for Trace-110
[ 162.496636] sof-audio sof-audio: error: failed to initialize trace -110
[ 162.808132] sof-audio sof-audio: error: ipc timed out for 0x30010000 size 0x3c
The same errors were also reported by Sven Schwermer on the mailing list
on a Tangier device, revert until we figure out what's wrong.
Cc: Sven Schwermer <sven@svenschwermer.de>
Cc: Yan Wang <yan.wang@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
SSP 0,1,2 on CHT share the same physical IRQ as SSP 3,4,5 respectively.
Fix this so that all SSPs IRQs are supported.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
The previous patch for SOF updated component IPC commands and provided an
ABI for configuration and control. This patch updates the IIR equalizer
to use such controls.
Also the missing COMP_STATE_READY from method new() is added. Lack of it
caused pipeline prepare fail.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The previous patch for SOF updated component IPC commands and provided an
ABI for configuration and control. This patch updates the FIR equalizer
to use such controls.
Also the missing COMP_STATE_READY from method new() is added. Lack of it
caused pipeline prepare fail.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The control interface is fixed to follow the component ABI. Separate tone
generator instances are used to feed individual channels. It allows
simultaneous testing of all channels by use of different tone frequencies.
To simplify features there is no mixer so e.g. DTMF telephony UI sounds
generation would need a channel mixer component after a two channel tone
output in the pipeline.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Due to previous patch the volume mute is updated to be controlled with
SOF_CTRL_CMD_SWITCH that maps to ALSA switch style control. Mute for a
channel is set with an (unsigned) value larger than zero. Zero value
unmutes the channel.
In both mute and volume set code the if statement to compare component
channel map is changed to compare to chanv[j].channel instead of used
chanv[j].value that looks incorrect.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds to struct sof_ipc_ctrl_data three new commands
SOF_CTRL_CMD_ENUM, SOF_CTRL_CMD_SWITCH, and SOF_CTRL_CMD_BINARY. In
addition an index parameter is added to address various features or
registers.
Commands SOF_CTRL_CMD_ROUTE, SOF_CTRL_CMD_SRC, SOF_CTRL_CMD_LOOPBACK,
SOF_CTRL_CMD_EQ_SWITCH, SOF_CTRL_CMD_EQ_CONFIG, SOF_CTRL_CMD_MUTE, and
SOF_CTRL_CMD_UNMUTE are removed.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch changes the sample rate conversion processing to use a single
multi-channel filter instead of per channel called mono filter instances.
The filter output is now rounded with 1/2 LSB add. The polyphase filter
input input block sizes are multiplied in SRC initialization to reach
near to or exacly the period length to reduce polyphase filter call
overhead.
The polyphase filter is now called via function pointer for more
flexibility with audio data formats. Currently S32_LE and S24_4LE are
supported.
Code cleanup includes removal of redundant variables and some debug
print code.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
1. Move source and header file.
2. Change src/lib/Makefile.am and src/audio/Makefile.am.
3. Chnage header file path.
Signed-off-by: Yan Wang <yan.wang@linux.intel.com>
This patch fixes the DC offsets introduced in the volume component
due to shifts and handles sign extension for 24-bit input samples
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Liam Girdwood