Reverts all changed media pipelines to again have 4000 ms
scheduling period. Change was introduced in order to workaround
firmware scheduling limitation, but with pipelines scheduled
separately we can revert it back.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Reverts all previosly changed cAVS pipelines from 3 to 2 periods.
Now we have separate buffers for DMA, so there is no need to make
DAI buffers consist of 3 periods. DMA will take care of any internal
hardware requirements.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Switches all pipelines for cAVS platforms to timer scheduling.
This way we limit the number of interrupt levels processed
in the system. Timer, IPC and IDC are already on level 2 and
DMAs are on level 5.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Changes number of SSP and DMIC DAI periods from 2 to 3.
This way we can support both timer and new single DMA
channel scheduling.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This patch adds to all DMIC related topologies the new token
SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME_MS. The value is set to 400
to correspond to 400 milliseconds long unmute ramp time. The
topology defined unmute will override the firmware internal
hard coded value if it is set in topology.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Pipeline format determines the buffer size calculation. With the
pipeline format set to S16_LE, hw_params fails for S24_LE and S32_LE
formats. So, change the pipeline format to s32le to support all
three formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This patch does the following:
1. Modify pipe-pcm-media to use the SCHED_COMP macro to set the
scheduling comp for the media pipeline.
2. Add low-latency and media pipelines to the apl nocodec
and apl pcm512x.
3. For the byt codec and nocodec topologies, modify the
PIPELINE_PCM_ADD macro to pass the scheduling comp name
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add quirks parameter in SSP_CONFIG_DATA(). Enable LBM in dupulex pipelines
by setting quirks as SOF_DAI_INTEL_SSP_QUIRK_LBM 64(1<<6). SSPx.IN port get
PCM data from SSPx.OUT. Note both mclk and quirks are optional parameter.
When quirks set, mclk should have value or initialize to default value
which is 0.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
By default topology is using too many capture and playback PCMs, DAIs and
pipelines for available host GW DMAC channels. Comment out some so that
DMAC channels stay within bounds. This also gives users options to
re-enable for theer given test HW.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Tomasz Lauda