For speakers SDW2 link is used.
For Headset SDW0 link is used.
add sof-adl-sdw-max98373-rt5682 topology
Signed-off-by: Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Adds pipe-drc-eq-volume-demux-playback.m4 for locating Multiband DRC and EQ
IIR on the path of the internal speaker.
This pipeline will be used by Eldrid first for Audio DRC/EQ offloading
purpose.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
Somehow we only support this configuration for BYT, but there are
Baytrail devices using the same codec.
BugLink: https://github.com/thesofproject/sof/issues/4160
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Failing _in the middle of one log entry_ should really not be treated as
a normal event. The purpose of a logging tool is to find issues, not
hide them.
Don't abort on EOF because of valid use cases like device suspend but
don't do it quietly.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a few missing log_err().
Remove calls to ferror() because:
- its return value is a meaningless "non-zero" boolean,
- we don't really care whether the dictionary file is in an error state
or not; an unexpected end of dictionary file is just as bad.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
In general the DMA trace runs until interrupted but there are cases
where it can exit "normally": when reading from a file or stdin, when
some error happens,....
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Make sure component creation is not tightly coupled to a particular IPC
version. This is mostly a mechanical change of structures being passed
to the comp creation APIs away from IPC specific to general structures.
Highlevel changes
1) Pass a common component data object and a component
specific data object during create().
2) Mark the component IPC derived data as "ipc_config" within the
component device to help developers track the data source origin.
3) Pass component specific data during creation so that componets
can allocate and copy to thier private data.
4) Comp_dev no longer has component specific data appended to it.
Instead we can store all in the comp private data (and hence use the
compiler to access it rather than by developer access methods).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Change to run smart_amp pipelines on DSP core 1, this will help reduce
the core 0 usage and add multi-core to the CI coverage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Builds a configuration of the max98373-rt5682 topology with AMP_SSP=2
defined and includes the IIR component
Signed-off-by: Ross Chisholm <ross.chisholm@xperi.com>
Some devices are using rt711 only, without amplifiers.
Add the "EXT_AMP" option in sof-tgl-rt711-rt1308.
Signed-off-by: Libin Yang <libin.yang@intel.com>
This will allow topologies to use different size dai periods.
Fixes: 1280987999 ("topology: use DAI_PERIODS in calculation of DAI buffer size")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Previously we had a channel map macro only in general dmic topology. As
the pipelines used with dmic are also used with other topologies the
dmic specific macro does not work anymore. Thus define generic macro in
pipeline.m4 that defaults to stereo channel map. This can be overridden
in topologies as shown in general dmic.
fixes: #4136
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This reverts commit 2c69afc5fd.
The dynamic pipeline feature is broken with PA enabled. Revert
this change until the issue is sorted.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This commit consists of files for adding IGO_NR component in arbitrary
topology. The proprietary static library shall be released by intelliGo
via private channel upon request.
Signed-off-by: fy.tsuo <fy.tsuo@intelli-go.com>
This patch adds development topology to run ASRC playback and
capture via SSP port to headset plug. We don't have many topologies
to test ASRC in current development devices so this is useful
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Add support for cs42l42 running on GLK boards. We add a 10 ms BCLK
delay to the SSP_CONFIG_DATA of SSP2 since the codec PLL is locking on
BCLK. Without the delay, there could be noise on TX path.
Signed-off-by: Brent Lu <brent.lu@intel.com>
looks like with the new ipc mechanisms we changed the function signature
and moved casting the message from platform code to ipc code.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Every log file should have a date.
ktime can be related to the TIMESTAMP column. It is especially useful to
spot logs delayed or stuck.
Some logs use ktime while others use a date and it can be sometimes
difficult to connect them with one another. This header can help.
Before:
TIMESTAMP (us) DELTA C# COMPONENT CONTENT
[ 5120116529] ( 0) c0 dma-trace ERROR FW ABI 0x3012001 ...
After:
TIMESTAMP (us) DELTA C# COMPONENT \
CONTENT ktime=5132.663s @ 2021-04-27 14:36:09 -0700 PDT
[ 5120116529] ( 0) c0 dma-trace ERROR FW ABI 0x3012001 ...
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
i.MX8QXP / i.MX8QM have the same configuration w.r.t topology.
But since we firstly added support for 8qxp all the names use
8qxp and then for 8qm we just borrow the files but using the 8qxp
naming.
This sometimes might cause confusion. So, we group under the
umbrella of imx8 naming both i.mx8qxp and i.mx8qm.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Learned the hard way. Will help refactoring or duplicated
"reverse-engineering" effort.
Zero code change, pure comments: no functional change.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Increase default width from 10 to 12 to stop common misalignment,
especially in relative mode.
New timestamp_width() function to avoid duplication and
divergence.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This makes the display of the mailbox ring buffer log much less
confusing. It should not happen with the DMA trace but will behave the
same in case something goes wrong.
Before this commit the only clue that wrapping had happened was a NaN in
the delta column (instead of the negative value).
The "other?" is because the start of the mailbox is sometimes corrupted,
or the timestamp goes sometimes back at boot for no obvious reason. In
other words this new separator is useful to highlight bugs too.
Absolute mode -e 0 with this commit:
TIMESTAMP DELTA C# COMPONENT LOCATION
[22598174808] ( 11) c0 ipc src/ipc/....
[22598174824] ( 15) c0 ipc src/ipc/....
[22598443257] ( 268433) c0 dma-trace src/trace/....
[22598443271] ( 14) c0 dma-trace src/trace/....
[22598443286] ( 14) c0 dma-trace src/trace/....
[22598943257] ( 499971) c0 dma-trace src/trace/....
--- negative DELTA: wrap, IPC_TRACE, other? ---
[22430943257] ( 0) c0 dma-trace src/trace/....
[22530943257] ( 100000000) c0 dma-trace src/trace/....
[22542943257] ( 12000000) c0 dma-trace src/trace/....
[22542943271] ( 14) c0 dma-trace src/trace/....
[22542943285] ( 14) c0 dma-trace src/trace/....
Relative mode -e 1 with this commit:
TIMESTAMP DELTA C# COMPONENT LOCATION
[ 3080783.6] ( 11.4) c0 ipc src/ipc/....
[ 3080799.1] ( 15.5) c0 ipc src/ipc/....
[ 3349232.5] ( 268433.4) c0 dma-trace src/trace/....
[ 3349246.8] ( 14.3) c0 dma-trace src/trace/....
[ 3349261.2] ( 14.4) c0 dma-trace src/trace/....
[ 3849232.4] ( 499971.2) c0 dma-trace src/trace/....
--- negative DELTA: wrap, IPC_TRACE, other? ---
[22430943257.0] ( 0.0) c0 dma-trace src/trace/....
[100000000.0] (100000000.0) c0 dma-trace src/trace/....
[111999999.5] ( 12000000.0) c0 dma-trace src/trace/....
[112000013.9] ( 14.4) c0 dma-trace src/trace/....
[112000028.2] ( 14.3) c0 dma-trace src/trace/....
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This reverts commit cd2444adbf.
Reverting this to unblock the CI runningon tgl-nocodec-ci platform.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Make BT offload m4 generic for platforms that supports it.
User needs to provide id number for pipe/link/pcm and hw config.
I2S config for BT SCO:
16 bit samples, 1 slot TDM, no padding
19.2Mhz MCLK, 256/128kHz BCLK, 16/8kHz fsync
Frame-sync length 1 cycle ("DSP_A" mode)
Codec clk in primary mode
For BT A2DP:
16 bit samples, DSP_A protocol
2 slot TDM, no padding
38.4Mhz MCLK, 1.536Mhz BCLK, 48kHz fsync
Codec clk in secondary mode
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Add macro to restrict channel number of PCM capabilities, this will
allow channels_min to be configurable. The default behavior is
not changed with this patch.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Add missing "break" so the -e option stops spilling on the -f precision
option. Fixes commit 53ce8b9d9f ("logger: new relative timestamps
option, relative to first entry seen"). Since that commit the -e option
was wrongly assigned to the precision too.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Decouple the IPC ABI major version from pipeline creation. This moves
struct sof_ipc_pipe_new from the pipeline and replaces it with it's
members (saving 8 bytes as no header is needed).
Add new feature specific pipeline APIs to configure pipeline at creation.
Additionally align testbench and UTs to API change.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
The m4 ifelse parameters using defn() are not working as expected.
If more than 3 parameters are passed to SSP_MULTI_CONFIG_DATA(),
the values are not correctly passed.
Fix this by removing defn() and correctly quoting the whole
ifelse section.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The m4 ifelse check on macro parameters is not working as expected.
If optional parameters are not passed, an empty string is written
to output conf file, instead of the "0" string specified in
the ifelse statement.
This has not caused functional errors as the empty string has
been interpreted as zero. Fix the logic despite this so that this
is not copied to other macros.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
IPC is aligned on at least 4 bytes, removes compiler warning about packed
data being aligned on 1 bytes.
In file included from /home/lrg/work/sof/sof/tools/testbench/file.c:23:
/home/lrg/work/sof/sof/tools/testbench/include/testbench/file.h:59:1: error: alignment 1 of ‘struct sof_ipc_comp_file’ is less than 4 [-Werror=packed-not-aligned]
59 | } __attribute__((packed));
| ^
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Change to run smart_amp pipelines on DSP core 1, this will help reduce
the core 0 usage and add multi-core to the CI coverage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Yong Zhi