Add targets that are meant to be used after defconfig,
to apply configs from <arch>/configs/override on top of defconfigs.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
CMake regeneration condition should depend on directory to automatically
update when new defconfigs are added.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Enable 3 simple test with host-testbench:
volume, src and eqiir
Usage:
./scripts/build-tools.sh -t
./scripts/host-build-all.sh
./scripts/host-testbench.sh
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Breakdown script to functions, use local variables, and a main function.
Use getopts to parse the arguments instead of manual parsing to leave no
room for errors, bugs, and inconsistent conventions introduced by custom
implementation.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Use getopts to parse the arguments instead of manual parsing to leave no
room for errors, bugs, and inconsistent conventions introduced by custom
implementation.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
When variable length array, filled with string will be
placed in sucha manner that null terminator address will
be divisible by four, then it will be lost in output
binary file. It leads to troubles during scanning content
of such a section. Such a problem occur in firmware
and produce logger and FW debug ABI mismatch and it's why
logger output is broken.
After change length of XCC_TOOLS_VERSION to be none of
number four multiplication problem with logger disappear.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
CMAKE_VERBOSE_MAKE was sometimes "hardcoding" the decision in CMake's
cache. Move that decision to the make invocation.
After running xtensa-build-all.sh [-v], it's now possible to choose
again whether "make -C build_apl_gcc/" should be VERBOSE or not without
starting from scratch and with the exact same configuration.
Before this commit it was possible for make to decide again after a
non-verbose xtensa-build-all.sh but not possible to decide again after a
verbose xtensa-build-all.sh... very confusing.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Adjust top_of_kernel_tree() function to SOF so invoking
./scripts/checkpatch.pl works out of the box and doesn't require
figuring what's going on and the existence of the --no-tree option which
sof-ci invokes "behind the scenes".
This instead of failing with:
Must be run from the top-level dir. of a kernel tree
Compared to --no-tree, this is also enables a couple extra checks like:
WARNING: use relative pathname instead of absolute in changelog text
PS: the space between check and patch is here to... defeat checkpatch
itself. It apparently doesn't expect any change to itself.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Disable verbose build by default in build script.
It would be too annoying if we do not need to debug
with make systems.
Use -v option to enable verbose log if need.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Add support for compiling FW with settings acceptable for clang,
in order to let it perform static analysis on the code.
Clang works mostly on ASTs made out of C code, so there is
no need to build complete signed binary for it.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Fix false positive return value for upsupported platforms.
Fix wrong parameter passed in when mutliple platform test.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Running on 120MHz Low Power Ring Oscillator enables more
aggressive power saving. Therefore this should be a default
options for all Cannonlake configurations that may run
on a single dsp core and does not need more than 120 MCPS.
Signed-off-by: Marcin Maka <marcin.maka@linux.intel.com>
Since xcc is the default toolchain for xtensa architecture,
the defconfigs should be customized for xcc.
gcc versions are saved for CI builds.
Signed-off-by: Marcin Maka <marcin.maka@linux.intel.com>
Command git describe looks only for annotated tags, but we should
get any tag reachable from master, that's why --tags flag is needed.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
This is an exception similar to the kernel pr_...() family.
Having a log string in a single line is much more readable for
a person who works with the trace output frequently.
Splitting trace strings into multiple lines seems to be a worse
alternative since it generates another warning anyway and encourages
developers to create very long trace entries which are wrapped
on a trace console and less readable.
Signed-off-by: Marcin Maka <marcin.maka@linux.intel.com>
Unify calls for compiler version and name for XCC and GCC.
Separate conversion of optimization level from Kconfig settings
to compiler flags to separate cmake function, because of usage
in two places.
Read XCC_TOOLS_VERSION from compiler.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Update xcc build config for all existing platforms.
xcc build with byt, cht and sue need special defconfig.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Add helper function sof_append_relative_path_definitions that
defines RELATIVE_PATH per source file for given target.
__FILE is not always suitable as C standard states that __FILE__ expands to
input file name, that usually is absolute path what will cause f.e. .rodata
size to be dependent on where project is physically located on the disk.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
When there are changes made to Kconfig files it's better
to run olddefconfig automatically to prevent undesired behaviour,
like for example depending on added config that has some default value
that is not present because developer didn't run olddefconfig
after pulling changes.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Traces in SOF are used like trace("<func>() info"),
in that case __func__ is not convenient, because it is not literal
and it would be needed to use %s everywhere and change
all current traces.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
checkpatch is currently checking for changes that need ABI updates
and actual ABI changes in the same loop in process(). So if some
file that needs an ABI change comes first, a WARNING will be issued.
Look for an actual ABI change before starting to crunch the entire
patch line by line.
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Do not check for u/s* vs u/sint*_t in SOF,
because there is only the longer variant.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
It was previously removed from SOF, but it's better to just disable
it for SOF to make delta with original checkpatch as small as possible.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Introduce constant that enables SOF-specific behaviour of checkpatch.
Changes made to original checkpatch should be easily visible
to make merging updates easier.
If code that is not applicable to SOF is just removed, then
while updating it's hard to distinguish if it is new feature
in checkpatch or was removed for SOF. It's better to just disable
parts of code that do not work for SOF.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
The cavs platform IPC shm file name in QEMU is changed
from ipc-io to ipc-dsp-io.
Use regular expression to find the right SHM IPC register file,
so that we can smoothly pass the transition of the QEMU update.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Merge kernel's checkpatch with custom features added for SOF.
SOF follows kernel code style, so checkpatch should be also up-to-date.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Merged hp buffer heap with normal buffer heap.
Since current buffer heap was actually using hp memory and it served
no purpose to have two heaps.
Removed extern capabilities and merged other capabiliteis to
buffer heap. Currently none of those buffer heaps supports extern.
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
The qemu for BDW and HSW removed shm mbox and moved it into dram.
Change the scripts to the new version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Increases HP Buffer Heap and Runtime System Heap sizes in order to
fit all the pipeline buffers.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Adding static libraries properly may be troublesome for developers
that are not familiar with CMake, so function that makes it easier
should be useful.
Usually developer will just add sources directly to the target.
Using static libraries should be limited just to closed / precompiled
3rd party components.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Process of documentation building and publishing requires
3 repositories. It is troublesome for people that are responsible
f.e. only for documentation publishing. It makes the process
easier by turning some easy to break steps from publisher instructions
into a script.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
CMake has convention of changing relative paths to absolute
for CMAKE_* variables. It does it automatically f.e. CMAKE_C_COMPILER.
However for our tools like objcopy we have to do it manually.
It also helps with integration of CMake in some IDEs.
Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Janusz Jankowski