payload_with_output_fmt token is used to tell sof driver whether
there is output audio format in the init instance ipc4 message
payload. payload_with_output_fmt = 1 mean there is audio output
format in the ipc4 message payload.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Add support for chained DMA pipelines in the HDMI passthrough topology.
Since the HDA hardware does not support S24_LE, remove the format from
the PCM capabilities for all the HDMI PCM's as well.
This version should work even if the kernel does not support chained DMA
as yet.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Audio hardware configuration of SKU 0C40 product is rt711 on link2,
two rt1316s on link0 and link1 and rt714 on link3
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Audio hardware configuration of SKU 0C10 product is rt714 on link0,
two rt1316s on link1 and link2
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Add a new pipeline chain-dma-playback.conf for chained DMA playback
and use it for HDMI depending on the HDMI_CONFIG.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This test uses module interface for eq_fir.
The use of decoded 16 bit FIR blob coefficients decreases a lot
the mismatch between float reference FIR vs. SOF fixed point
implementation.
This patch adds the script tools/tune/eq/cmocka_data_eq_fir.m that
generates the files cmocka_fir_coef_2ch.h and cmocka_fir_ref.h.
The script debug_files_plot.m can be used to visualize the unit
test result and error for data that is generated if macro
DEBUG_FILES is defined.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Andrula Song <xiaoyuan.song@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
module_config contains a .data pointer that is used both for initial
and run-time configuration. The initial configuration should be
const. We add a new .init_data pointer for it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fix a confusing mistake high-pass -> low_pass and typo. It's
only a user help text change for "help stdlpf".
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
With the release of RTNR version 20220728,
period for capturing pipeline requires at least 5ms.
This commit set 5ms period for RTNR in
MT8195 topology.
Signed-off-by: Ming Jen Tai <mingjen_tai@realtek.com>
log and linear are not supported with IPC4. Use no_fade and fade
instead and set the default to fade.
This should fix the following error seen with volume prepare():
volume: comp:9 0x60003 volume_prepare(): invalid cd->ramp_func
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This patch fixes the upper frequency for distortion plus noise
measurement. The min(fs1, fs2) leaves part of upper band unmeasured
and gives a too good looking THD+N performance figure when output
rate is higher than input rate. The proper way is to measure the
(near) full output rate bandwidth.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The test is treated passed if there were no failed cases. The fix in
this patch is to force one failed case if both failed and passed counts
are zeros. Then the upper level test scripts/host-testbench.sh reports
correctly the test fail.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Fixes this error:
```
No platform found in name "sof-rpl.ri"; unknown memory layout.
```
... and shows the Memory Layout.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Duplicated dai index results to module initialization
faiure in multi-stream test. Dai 2 should be used by
stream nocodec-2.
Signed-off-by: Rander Wang <rander.wang@intel.com>
2 small changes required:
- Stop calling sys.exit(1) in case of error not to exit the importer
- Change EraseVars() to return the checksum value instead of printing
it. Move the print() to the main() function
This is required by the new sof-bin tests that compare signed with
unsigned binaries; submitted in
https://github.com/thesofproject/sof-bin/pull/105
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
It's now possible to rebuild just only one modified topology without
rebuilding all of them from scratch.
Building topologies v2 has two steps:
1. concatenation of abi.conf with topo.conf
2. run alsatplg on the concatenation
Concatenation step 1. was wrongly implemented at configuration time, not
at build time. So when the topology source of step 1 (topo.conf) was
modified, the dependency of step 2 (= the concatenation) was not
affected and the topology was not rebuilt.
Fix this by moving the concatenation to build time.
Fixes commit 308a24a92b ("topology2: Add build support")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This makes it possible to find stuff in the output of `ninja help`.
Zero effect on the build artefacts.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit lets user to set data blob from host.
For example:
$ amixer -Dhw:0 controls | grep RTNR
numid=47,iface=MIXER,name='RTNR10.0 rtnr_bytes_10'
numid=48,iface=MIXER,name='RTNR10.0 rtnr_data_10'
numid=49,iface=MIXER,name='RTNR10.0 rtnr_enable_10'
$ sof-ctl -Dhw:0 -n 48 -b -s ./preset.bin
A new empty data control added to the topology will be used to send the
blob.
Model handler is now used for transferring the blob data.
Signed-off-by: Ming Jen Tai <mingjen_tai@realtek.com>
Code Refine
The increase of non-32bit aligned blob sizes needs to be removed
because it can cause mismatch of blob binary header vs. actual
size. Instead error if blob size is not multiple of four bytes.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds initial version of MFCC setup tool setup_mfcc.m. It
outputs a configuration topology macro file that matches the current
Matlab concept code. The configuration can be tested in testbench
with the supplied scripts run_mfcc.sh and decode_ceps.m.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds basic macros needed for MFCC in testbench and in
developmemnt topologies for hda-generic-2ch and up2. The
configuration blob in this matches the reference Matlab code
as configured to match Pytorch default MFCC.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This topology is used for i.MX8QXP/i.MX8QM with baseboard
to enable both cs42888 and wm8960 codecs.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
This reverts commit e31c7abeeb.
This caused most tests to fail on sh-tglu-rvp-nocodec-ci-02
in daily run 15919, see some more errors in logs shared in
initial PR #6318 and new issue #6367
FW reported error: 113 - Invalid destination queue (pin) ID provided
ipc error for msg 0x45000004|0x6
sof_ipc4_route_setup: failed to bind modules copier.SSP.8.1 -> gain.7.1
I don't know why this failed and I did NOT test this revert, however:
- This topology change is apparently the only thing that changed
compared to the day before.
- The error message seems very much related.
- Other people seem to agree.
- According to Ranjani, this feature is not urgent.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This time the target is to make the demuxer more modular so that it is
not coupled with file reading operations and it is easy to use
alsa-lib directly.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
This updates documentation to reflect that now param id is only 2 bytes
followed by 2 bytes codec id.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
The allocated packet should accommodate the header, the data, and the
checksum. The header size was missing from the condition from the
beginning, even if its there in realloc parameter. The bug should be
harmless waste of cycles thou.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
The sync_word_at() only checks for two things, if the len parameter is
greater than sizeof(uint32_t) and if the memory pointed p parameter
holds PROBE_EXTRACT_SYNC_WORD value. Now that the available bytes is
checked just before sync_word_at() call, the whole function starts to
look a bit pointless.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Libin Yang