Adds kcps attribute to pipeline class with 0 default value.
The default can be overrided with KCPS_PIPELINE_DEFAULT define.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Remove all support for cAVS 1.8 platformsm including Cannon Lake,
Comet Lake, Whiskey Lake and Coffee Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch replaces in DMIC0 capture the gain.N.1 component with IIR
high-pass. The gain has been a placeholder
dai-copier-gain-module-copier-capture.conf while the EQ component has
not been available. The pipeline is replaced by
otherwise similar dai-copier-eqiir-module-copier-capture.conf.
The dmic-default.conf sets the default IIR response to 40 Hz
high-pass with 0 dB gain. The topologies will get only the high-pass
filter but no amplification. The default is changed in
sof-hda-generic.conf to 20 dB gain to address the too silent capture
because these topologies for generic Linux end users do not contain
any other capture enhancements.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch includes to sof-hda-generic.conf the new
highpass-capture-be.conf as passthrough-capture-be.conf replacement
that adds to DAI copier pipeline the IIR high-pass filter. The
response is hard coded to 0 dB amplification and 40 Hz cut-off.
The analog microphone headsets creates a strong DC input when the bias
voltage settles. It can be even full-scale and sound very loud. The
high-pass filter suppresses such input signal.
Fixes#7116
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Remove all support for cAVS 1.5 platformsm including Apollo Lake,
Sky Lake, Kaby Lake, Broxton and Gemini Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The previous value 10 is only 0.1 us that disables the gain
ramp totally and causes harsh sounding volume transitions.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The purpose of this commit is to separate XTOS-specific code
from the Zephyr-specific code found in sof/schedule/task.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The purpose of this commit is to separate the XTOS-specifc
code from the Zephyr-specifc code found in sof/sof.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Not all amplifiers support feedback. We should not add feedback support
on topology to shch amplifiers.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
index
We use the "pcm id * 10 + N" formula where N is from 0 to 9 to assign
pipeline and route id in f0a010052b ("topology2: cavs-sdw: group route
and pipeline index"). Now apply to ALH dai index.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
The known issues with the pipeline-free chain DMA implementation has
now been solved, so we can re-enable chain DMA usage.
This reverts commit c3807ae4a7.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Where there more than 1 object of the same type defined at the same node
level, use arrays to define the object. For example, we can define 2
routes as follows:
Object.Base.route [
{
source "smart_amp.2.1"
sink "copier.SSP.2.1"
}
{
source "mixin.1.1"
sink "mixout.2.1"
}
]
This allows us to merge 2 arrays from different conf files without
needing to make their instance ID's unique.
Assume we add another route in a separate conf file like below:
Object.Base.route [
{
source "gain.5.1"
sink "copier.5.1"
}
]
The alsatplg compiler will merge them as follows resulting in 3 route
objects.
Object.Base.route [
{
source "smart_amp.2.1"
sink "copier.SSP.2.1"
}
{
source "mixin.1.1"
sink "mixout.2.1"
}
{
source "gain.5.1"
sink "copier.5.1"
}
]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This patch adds to development topologies a topology
sof-hda-src-generic.tplg. It is similar to sof-hda-generic but adds
to first playback PCM pipeline a SRC component after gain. The
pipeline supports playback of S32_LE with 8 - 192 kHz rates.
The cavs/src.conf is merged to src.conf, and the SRC format
include files are brought up from cavs directory. The topology
cavs-sdw-src-gain-mixin.tplg related .conf files are updated
for common location. The missing rate_out attribute is added.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Remove all support for Broadwell and Haswell platforms, they
aren't supported any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
As the copier can do format conversions, and many pipeline components
can do conversions as well, it is important for the topology to define a
single format to use in the "dai_out" copier. This ensures deterministic
behaviour with the driver.
Implement this behaviour by switching topologies to use the
passthrough-capture-be pipeline as template for the backend capture
pipelines.
The previously used passthrough-be template is problematic as
the base class already defines multiple audio formats, with multiple
different sample formats. The new passthrough-capture-be only defines
one sample format by default and is a better starting point as a base
class.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Add a separate template for capture backend pipelines. The
passthrough-be pipeline has been used as template for both playback and
capture, but we want to provide different defaults especially for the
audio formats in capture case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use mixout-gain-smart-amp-dai-copier-playback pipeline
for SSP0 DAI playback.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This patch adds the widget class for smart_amp module
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
The micsel will need to use the base config extension and the init
config type will need to be set in the manifest.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
No more need for hard-coded blob header, sof-ctl provides
an up-to-date header so better to use it.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
For MTL chromebook, SSP 1 is used for BT offload with
cavs-rt5682 configuration
Co-developed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Add pipelines for iir and fir eq as EFX (endpoint effect) component in
hda. Add HDA_CONFIG "efx" to compile efx versions of hda_generic
pipelines.
Add define EFX_IIR_PARAMS and EFX_FIR_PARAMS to define different iir and
fir parameters from separate conf files during compile time (default
"passthrough").
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Adds new topology build based on sof-adl-max98360a-rt5682-2way
with appending arg `-DDMIC_DAI_LINK_16k_PDM=STEREO_PDM1` for existing
ADL-P projects.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
As WoV may be used on HDA platforms, SDW platforms, as well as
nocodec platforms. Let's use a more safe pipeline ID for WoV.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Now the abi header is changed and the config data is send through
large_config ipc message instead of init_instance ipc message.
Update the config data accordingly.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Changes all routes of form:
Object.Base {
route.1 {
source copier.host..1
sink gain..1
}
route.2 {
source gain..1
sink mixin..1
}
}
to
Object.Base {
route.1 {
source copier.host.$index.1
sink gain.$index.1
}
route.2 {
source gain.$index.1
sink mixin.$index.1
}
}
E.g. change ".." notation where the route index is expanded in between
the dots to explicit reference to the route index.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
For IPC4 we are re-using the sof_abi_hdr to encapsulate the blob from/to
user space with minor deviation from IPC3:
- ABI magic is different
- the type is used as param_id in IPC4 (it carries the same functionality)
The IPC type can be specified with -i and defaults to 3 (IPC3).
-p is added as a new option for param_id, but -t and -p will do the same
thing.
After reading a blob, print a message for unexpected ABI magic number, but
do not block the execution.
To generate a header for 100 bytes payload:
For IPC3:
sof-ctl -g 100 -t 2
sof-ctl -i 3 -g 100 -t 2
For IPC4:
sof-ctl -i 4 -g 100 -p 2
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Remove all support for Baytrail and Cherrytrail platforms, they
aren't supported on the "main" branch any more. To build SOF for them
use the "table-v2.2" branch.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Now deep buffer uses S24_LE but other pipelines use S32_LE internal format
. Chrome team found a bug that deep buffer can't work well with I2S codec
since fw only support S32_LE for I2S now.
This patch will use S32_LE to align with current requirement
Signed-off-by: Rander Wang <rander.wang@intel.com>
This patch adds a number of generic or effect type of blobs
to enable use of equalizers in topology2.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Use of isempty() instead of length() to the check for non-empty
variable can avoid warnings in executing code in Matlab.
The unnecessary print of variable to console is removed. E.g.
struct bs, or biquad transfer function zeros vector a.
In system() command no need to store the console output, just
check the return status.
In switch-case statements no need for comma after case and
otherwise.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch contains the changes to export EQ blobs in both tplg1
IPC3 and tplg2 IPC4 formats.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Jyri Sarha