dt-bindings: i2c: i2c-mux-pca954x: Convert to DT schema
Convert the i2c-mux-pca954x binding to DT schema format. Add the missing compatible for 'nxp,pca9645' which is already in use. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210526184839.2937899-6-robh@kernel.org
This commit is contained in:
Rob Herring
parent
a404a6367b
commit
86335b51e4
|
|
@ -1,74 +0,0 @@
|
|||
* NXP PCA954x I2C bus switch
|
||||
|
||||
The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: Must contain one of the following.
|
||||
"nxp,pca9540",
|
||||
"nxp,pca9542",
|
||||
"nxp,pca9543",
|
||||
"nxp,pca9544",
|
||||
"nxp,pca9545",
|
||||
"nxp,pca9546", "nxp,pca9846",
|
||||
"nxp,pca9547", "nxp,pca9847",
|
||||
"nxp,pca9548", "nxp,pca9848",
|
||||
"nxp,pca9849"
|
||||
|
||||
- reg: The I2C address of the device.
|
||||
|
||||
The following required properties are defined externally:
|
||||
|
||||
- Standard I2C mux properties. See i2c-mux.txt in this directory.
|
||||
- I2C child bus nodes. See i2c-mux.txt in this directory.
|
||||
|
||||
Optional Properties:
|
||||
|
||||
- reset-gpios: Reference to the GPIO connected to the reset input.
|
||||
- idle-state: if present, overrides i2c-mux-idle-disconnect,
|
||||
Please refer to Documentation/devicetree/bindings/mux/mux-controller.yaml
|
||||
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
|
||||
children in idle state. This is necessary for example, if there are several
|
||||
multiplexers on the bus and the devices behind them use same I2C addresses.
|
||||
- interrupts: Interrupt mapping for IRQ.
|
||||
- interrupt-controller: Marks the device node as an interrupt controller.
|
||||
- #interrupt-cells : Should be two.
|
||||
- first cell is the pin number
|
||||
- second cell is used to specify flags.
|
||||
See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||||
|
||||
Example:
|
||||
|
||||
i2c-switch@74 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,110 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: NXP PCA954x I2C bus switch
|
||||
|
||||
maintainers:
|
||||
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
||||
|
||||
description:
|
||||
The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/i2c/i2c-mux.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- enum:
|
||||
- nxp,pca9540
|
||||
- nxp,pca9542
|
||||
- nxp,pca9543
|
||||
- nxp,pca9544
|
||||
- nxp,pca9545
|
||||
- nxp,pca9546
|
||||
- nxp,pca9547
|
||||
- nxp,pca9548
|
||||
- nxp,pca9846
|
||||
- nxp,pca9847
|
||||
- nxp,pca9848
|
||||
- nxp,pca9849
|
||||
- items:
|
||||
- const: nxp,pca9646
|
||||
- const: nxp,pca9546
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 2
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
i2c-mux-idle-disconnect:
|
||||
type: boolean
|
||||
description: Forces mux to disconnect all children in idle state. This is
|
||||
necessary for example, if there are several multiplexers on the bus and
|
||||
the devices behind them use same I2C addresses.
|
||||
|
||||
idle-state:
|
||||
description: if present, overrides i2c-mux-idle-disconnect
|
||||
$ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c-mux@74 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
Loading…
Reference in New Issue