As ACRN prepares to support servers with large amounts of memory
current logic to allocate space for 4K pages of EPT at compile time
will increase the size of .bss section of ACRN binary.
Bootloaders could run into a situation where they cannot
find enough contiguous space to load ACRN binary under 4GB,
which is typically heavily fragmented with E820 types Reserved,
ACPI data, 32-bit PCI hole etc.
This patch does the following
1) Works only for "direct" mode of vboot
2) reserves space for 4K pages of EPT, after boot by parsing
platform E820 table, for all types of VMs.
Size comparison:
w/o patch
Size of DRAM Size of .bss
48 GB 0xe1bbc98 (~226 MB)
128 GB 0x222abc98 (~548 MB)
w/ patch
Size of DRAM Size of .bss
48 GB 0x1991c98 (~26 MB)
128 GB 0x1a81c98 (~28 MB)
Tracked-On: #4563
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: acpi: changed the enum "acpi_dmar_type" to macros to pass the
MISRA-C check
Tracked-On: #4535
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
- need to specify the load_addr in the multiboot2 address tag. GRUB needs
it to correctly calculate the ACRN binary's load size if load_end_addr is
a non-zero value.
- multiboot2 can be enabled if hypervisor relocation is disabled.
- print the name of the boot loader. This might be helpful if the boot
loader, e.g. GRUB, inludes its version in the name string.
Tracked-On: #4441
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Initialize efi info of acrn mbi when boot from multiboot2 protocol, with
this patch hypervisor could get host efi info and pass it to Linux zeropage,
then make guest Linux possible to boot with efi environment;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize module info and ACPI rsdp info of acrn mbi when boot from
multiboot2 protocol, with this patch SOS VM could be loaded sucessfully
with correct ACPI RSDP;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize mmap info of acrn mbi when boot from multiboot2 protocol,
with this patch acrn hv could boot from multiboot2;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize and sanitize a acrn specific multiboot info struct with current
supported multiboot1 in very early boot stage, which would bring below
benifits:
- don't need to do hpa2hva convention every time when refering boot_regs;
- panic early if failed to sanitize multiboot info, so that don't need to
check multiboot info pointer/flags and panic in later boot process;
- keep most code unchanged when introduce multiboot2 support in future;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch re-arch boot component header files by:
- moving multiboot.h from include/arch/x86/ to boot/include/ and keep
this header for multiboot1 protocol data struct only;
- moving multiboot related MACROs in cpu_primary.S to multiboot.h;
- creating an independent boot.h to store acrn specific boot information
for other files' reference;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- It is meaningless to enable debug function in parse_hv_cmdline() because
the function run in very eary stage and uart has not been initialized at
that time, so remove this debug level definition;
- Rewrite parse_hv_cmdline() function to make it compliant with MISRA-C;
- Decouple uart16550 stuff from Init.c module and let console.c handle it;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Per ACPI 6.2 spec, chapter 5.2.5.2 "Finding the RSDP on UEFI Enabled Systems":
In Unified Extensible Firmware Interface (UEFI) enabled systems, a pointer to
the RSDP structure exists within the EFI System Table. The OS loader is provided
a pointer to the EFI System Table at invocation. The OS loader must retrieve the
pointer to the RSDP structure from the EFI System Table and convey the pointer
to OSPM, using an OS dependent data structure, as part of the hand off of
control from the OS loader to the OS.
So when ACRN boot from direct mode on a UEFI enabled system, hypervisor might
be failed to get rsdp by seaching rsdp in legacy EBDA or 0xe0000~0xfffff region,
but it still have chance to get rsdp by seaching it in e820 ACPI reclaimable
region with some edk2 based BIOS.
The patch will search rsdp from e820 ACPI reclaim region When failed to get
rsdp from legacy region.
Tracked-On: #4301
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The pointer variable 'start' should be checked against NULL
right after detected it is not pointer to a space character,
otherwise the pointer variable 'end' must hold the wrong
address right after NULL if the cmdline containing trailing
whitespaces and deference the wrong address out of cmdline
string. this parsing code also been optimized and simplified.
Tracked-On: projectacrn#4250
Signed-off-by: Gary <gordon.king@intel.com>
rename the macro since MAX_PCPU_NUM could be parsed from board file and
it is not a configurable item anymore.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The calculation of the end boundry address is corrected by
adding the size extracted from _DYNAMIC to start address
in type of uint8_t while improving the code by calulating
the end boundry address after scanning, also reducing type
casts accordingly.
Tracked-On: projectacrn#4191
Signed-off-by: Gary <gordon.king@intel.com>
The default PCI mmcfg base is stored in ACPI MCFG table, when
CONFIG_ACPI_PARSE_ENABLED is set, acpi_fixup() function will
parse and fix up the platform mmcfg base in ACRN boot stage;
when it is not set, platform mmcfg base will be initialized to
DEFAULT_PCI_MMCFG_BASE which generated by acrn-config tool;
Please note we will not support platform which has multiple PCI
segment groups.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, memory with size of 'CONFIG_LOW_RAM_SIZE' will be
allocated when 'get_direct_boot_ap_trampoline()' is called.
This patch refine the implementation of of above function, it
returns the base address of trampoline buffer when called, and
the memory is allocated when vboot module is initialized.
Tracked-On: #3992
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
With cpu sharing enabled, per_cpu vcpu cannot work properly as we might
has multiple vcpus running on one pcpu.
Add a schedule API sched_get_current to get current thread_object on
specific pcpu, also add a vcpu API get_running_vcpu to get corresponding
vcpu of the thread_object.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move 8-bit sum code to a separate new function calculate_sum8() in
util.h and replace the old code with a call to calculate_sum8()
Minor code cleanup in found_rsdp() to make it more readable. Both break and
continue statements are used in a single for loop, changed to only use break
statement to make the logic simpler.
Fixed some coding style issues reported by checkpatch.pl for file
hypervisor/boot/acpi_base.c
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Minor cosmetic fixes in acpi.h:
Move and group similar defines together
Rename RSDP_CHECKSUM_LENGTH to ACPI_RSDP_CHECKSUM_LENGTH
Add post fix 'U' to define as unsinged int and change code accordingly
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All tables and structs must be byte packed to match ACPI
specification, also use __packed in place of __attribute__((packed))
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently ACPI related defines/structs are scattered across multiple C
source files, move them into acpi.h so that they can be shared and used by
vacpi code (to be added in subsequent commits).
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
When need hpa and hva translation before init_paging, we need hpa2hva_early and
hva2hpa_early since init_paging may modify hva2hpa to not be identical mapping.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In grub 2.02, the flag of MULTIBOOT_INFO_HAS_CMDLINE is set even there is
no cmdline was configured. So we need to validate the content of cmdline
in multiboot info. If there is no cmdline exist, we should not do merge
cmdline for SOS VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires type conversion shall be explicity.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the violations not touched the logical.
1.Function return value not checked.
2.Logical conjuctions need brackets.
3.No brackets to then/else.
4.Type conversion without cast.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
MISRA-C standard requires the type of result of expression in if/while pattern shall be boolean.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Zephyr kernel is stripped ram image, its entry and load address
are explicitly defined in vm configurations, hypervisor will load
Zephyr directly based on these configurations.
Currently we only support boot Zephyr from protected mode.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously the bootargs of SOS_VM is stored in a text file and stitched
into multiboot mods[0].string whereas the bootargs of PRE_LAUNCHED_VM is
stored in vm_configurations.c. Given the mods[].string will be used to
store Kernel image signature under hybrid mode, move the bootargs of SOS_VM
to vm configurations also to make it consistent with PRE_LAUNCHED_VM;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Different kernel has different load method, it should be configurable
in vm configurations;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For a Linux guest, the kernel load address should be gotten from zeropage
even for a pre-launched VM;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guest OS of ACRN will not be limited to Linux, so refine the struct
of sw_linux to more generic sw_module_info. Currently bootargs and ramdisk
are only supported modules but we can include more modules in future;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently when get_rsdp is called, the EFI depriv_boot env is not initialized.
In such case it will fallback to the legacy mechanism of ACPI table.
If the ACPI table based on legacy mechanism is not found, it will fail to get
the ACPI table and then the system will hang.
On the old platform it still can parse the ACPI table from legacy mechanism.
In fact when EFI RSDP exists, the EFI RSDP is preferred instead of legacy ACPI
RSDP.
In order to avoid multiple calling of depriv_init_boot, the init_boot_operations
is renamed and called after X2apic is enabled(early_init_lapic).
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the get_rsdp() will be called several times and on some
platform it needs to scan the signature of "RSP ptr" in BIOS EBDA region
and 0xE0000-0xFFFFF region. It is slow.
So after the RSDP is parsed, it will be assigned to acpi_rsdp.
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
remove some unnecessary includes,
some can cause reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: acpi_parser/acpi_ext.c
modified: acpi_parser/dmar_parse.c
modified: boot/acpi_base.c
modified: boot/guest/direct_boot_info.c
modified: include/arch/x86/per_cpu.h
Victor Sun