Get and save native root port's max payload in dev cap register in
vrp_config data structure which will be used to configure vrp's max
payload by hv.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The trb pointer may be NULL when get the address from user space, add
the pointer check before use the trb.
Tracked-On: #6172
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
return value 'err' of mmio_rb_lookup() being 0 ensures
'entry' is not NULL, hence checking it before 'free(entry)'
is unnecessary.
Tracked-On: #6157
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The latest version of RTCT specification is version 2.
This patch is to add RTCT v2 support for virtual RTCT
of guest.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Emulation of guest lapic ID has been enhanced to
indicate the topology of vCPU hierarchy.
This patch refine logic to build virtual RCTC_v1 table
of guest to adapt above lapic ID changes.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
hv is responsible to ensure PTM is always enabled on hw root port if
that root port is PTM root-capable. If PTM root is not enabled already in physical
root port before guest launch, guest OS can only enable it in root port's virtual
config space and PTM may not function as desired so we would rather not
to allow user to enable PTM on pass-thru device in this case.
Also revisit a few comments to add assumption that acrn only support a
simple PTM hierarch emulation i.e., EP (ptm requestor) is directly connected
to root port (ptm root), or ptm requestor is rcie).
V4:
- Change behavior from V3: When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and pass thru the device
with no PTM support.
V3:
- When users tries to enable PTM while PTM root is not enabled on
physical root port, allow user to launch VM and enable PTM in virtual
root port. This is not going to enable PTM on physical root port.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Only free rb_entry when we remove this entry from the rb tree, otherwise, a
page fault would trigger when next rb itreation would access the freed rb_entry.
Tracked-On: #6056
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- Change 64-bit MMIO BAR window to 256G-512G
The release is the same as 736a03222f.
This is just to update the changelog.
Tracked-On: #5913
Signed-off-by: Peter Fang <peter.fang@intel.com>
A user can use "--pm_notify_channel uart,allow_trigger_s5" to indicate
the User VM is allowed to trigger system S5.
"--pm_notify_channel uart" means a vuart channel will be created in the
User VM to allow communication with the VM's life_mngr. The Service VM
can then initiate S5 in the guest via its dm's monitor interface. The
additional option, "allow_trigger_s5", will create a socket connection
with the Service VM's life_mngr, allowing this VM to initiate system S5.
v1 -> v2:
- rename pm_notify_channel type to PWR_EVENT_NOTIFY_UART_TRIG_PLAT_S5
Tracked-On: #6034
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Make builds reproducible by honoring SOURCE_DATE_EPOCH and USER
environment variables in the respective Makefiles. Just follow the
recommendations at https://reproducible-builds.org/
Build tools (e.g. Debian packaging, Yocto) use this to ensure reproducibility
of packages.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Add one more sanity check: If the root port has more than
one child, we won't enable PTM on the guest.
This is not necessarily an error. We flag it as
error just because we don't have this type of hw
configuration at development time thus this configuration
is not tested.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If user sets enable_ptm option on passthru device, passthru device
calls ptm_probe() to check and enable ptm on passthru device. If error
is found during sanity check, ptm will not be enabled in the guest
and an error will be reported to user. However, this doesn't
prevent user from launching guest and passing through the device to the guest.
If no error is found, PTM is enabled in the guest and the
passthru device will connect to virtual root port (which acts as PTM
root) instead of virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch probes whether hw supports ptm. It is used to check whether ptm
can be enabled on the passthru pci device. It checks whether passthru
device support PTM requestor capability, then check whether its upstream
root port support PTM root role. Errors are reported to user if sanity
check fails.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add functionality to build and cache pci hierarchy, which are mainly
used to retrieve # of children of pci bridge or pci bus.
get_device_count_on_bus(): get # of child devices on a pci bus
get_device_count_on_bridge(): recursively get # of child devices on a pci bridge
scan_pci(): build and cache pci hierarchy
pci_find_root_port(): find root port of a pci device
clean_pci_cache(): free pci cache
scan_pci_test(): test of scan pci hierarchy (disabled)
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add a few pci utility functions to help easy access of pci
functionalities.
1. pci_find_capability(): find position of specified pci capability register
2. pci_find_ext_cap(): find extend capability register position from cap_id
3. pci_pcie_type(): find pci-e device type
4. is_root_port(): check whether pdev is a pci root port
5. is_bridge(): check whether pdev is a bridge
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Unify two functions definitions/declarifications:
Update the parameters from char array to char pointer.
to fix the build issue:
probeutils.c:61:29: error: argument 1 of type 'char *' declared
as a pointer [-Werror=array-parameter=]
Initialize local variable "c" to fix build issue:
core/mevent.c:122:21: error: 'c' may be used uninitialized
[-Werror=maybe-uninitialized]
Tracked-On: #5993
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
mmio_devs[0] is hard code for acpidev_pt, and mmio_devs[1] for
mmiodev_pt. Use mmio_dev_idx as index of mmio_devs[], to remove hard
code.
Remove hpa, gpa, size information from mmio_dev_ops, add acrn_mmiodev into
mmio_dev, to record hpa, gpa and size information for each passthough
mmio device.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The mmio devices use hard code GPA base, allocating GPA base resource
for them instead.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The TPM information in ACPI table is for both VPTM and passthough TPM,
so only one TPM device is allowed.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The GPA of TPM device has fixed value TPM_CRB_MMIO_ADDR, remove
TPM_CRB_MMIO_ADDR and allocate GPA base for TPM device
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The ACPI MMIO devices, like TPM, has a fixed base GPA. Sould support
GPA resource allocating for MMIO devices. GPA region
0xF0000000~0xFE000000 is not used, can allocate GPA from it.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There is "void deinit_mmio_devs()" in ./devicemodel/hw/mmio/core.c,
but "int deinit_mmio_devs()" in ./devicemodel/include/mmio_dev.h
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This temporary release is based on the following commit:
commit 83b4731bab0423e3f9ffccfb37a882090be2f44a
Author: Tao Yuhong <yuhong.tao@intel.com>
Date: Wed Apr 14 07:43:11 2021 -0400
Change 64-bit MMIO BAR window to 256G-512G
DM maps 64-bit mmio BARs of vdev into 4G-5G, for post-launched VMs. At native
platform, 64-bit MMIO BARs which have 39-bit address, are always mapped into
256G-512G address space.
DM will change the address window of 64-bit vdev BARs of post-launched VMs to
256G-512G. That ask OVMF to do the same change, to boot from passthrough SATA/MVME
disks, which have 64-bit MMIO BAR.
Tracked-On: #5913
Signed-off-by: Peter Fang <peter.fang@intel.com>
ACRN didn't support dynamic memory allocation. SO it would reserve
a big page pool and use the GPA as index to get a page to do EPT
mapping. In order to save memory, we put high MMIO windows to [4G, 5G].
AFter we support dynamic page allocation for EPT mapping, we move
high MMIO windows to where it used to ([256G, 512G]) for 39 bits physical
address), we could move high memory to where is used to too ([4G, 4G +
size]).
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
DM maps 64-bit mmio BARs of vdev into 4G-5G, for post-launched VMs. At native
platform, 64-bit MMIO BARs which have 39-bit address, are always mapped into
256G-512G address space.
Change PCI_EMUL_MEMBASE64 to 256G, change PCI_EMUL_MEMLIMIT64 to 512G. So that
the 64-bit vdev BARs of post-launched VMs have same address space with native
platform.
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
GPA of software SRAM is available only after
build_vrtct() function is called and the return
value of it is valid(Not NULL).
This patch fix bug in create_and_inject_vrtct()
function which violates above pre-condition when
calling get_software_sram_base_gpa().
Tracked-On: #5973
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Windows graphic driver obtains DSM address from in-BAR mmio register
which has passthroughed. Not like the other platforms obtained from
pci configure space register which has virtualized. GPU GuC must use
WOPCM in DSM, besides, Windows OS wants to manage DSM also. These two
reason force acrn has to keep identical mapping to avoid trap mmio
BAR to do the emulation.
Tracked-On: #5880
Signed-off-by: Peng Sun <peng.p.sun@intel.com>
Enhance the 'misc/Makefile' to improve readability by grouping the
tools based on whether these are `services` or `debug_tools`
(following the folders they're in) and also create separate build
folders instead of putting *both* services and debug_tools in the
build/misc/debug_tools folder (default value).
Tracked-On: #5793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
From the Figure 11-10. Downstream Facing Hub Port State Machine the
device connect status should be disabled and the PLS should be polling
for USB2.0, when the device be connected, then the xHCD send the port
reset, for acrn we use libusb_reset_device to emulate the bus reset
action.
Tracked-On: #5795
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For clarity, we now prefer y|n over 0|1 as the values of boolean options on
make command lines. This patch applies this preference to the Makefile of
the device model and tools, while RELEASE=0|1 is still supported for
backward compatibility.
Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Update the 'acrn-dm' usage information. It is displayed when using
'-h' or when an argument parsing error occured but was not up-to-date
with the actual implementation.
Tracked-On: #5781
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Exit main() if pm_by_vuart_init() fails
- Use SIGHUP to gracefully power off a VM if pm_monitor_loop()
encounters a failure
- Identify a closed socket as a failure in pm_monitor_loop()
Tracked-On: #5736
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 6.1, "A device object must contain either an _HID object
or an _ADR object, but should not contain both."
Remove this object otherwise iasl would complain
"Warning 3073 - Multiple types ^ (Device object requires either a _HID
or _ADR, but not both)"
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Per ACPI 6.x chapter 19.6.109, the Processor Operator is deprecated.
Replace it with Device Operator, otherwise the iasl would complain
"Warning 3168 -
Legacy Processor() keyword detected. Use Device() keyword instead."
when launch post-launched VM in devicemodel.
Tracked-On: #5719
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
PCI spec said that BAR base should be naturally aligned. But on
ACRN if the bar size < PAGE_SIZE, BAR base should be aligned with
PAGE_SIZE. This is because the minimal size that EPT can map/unmap
is PAGE_SIZE.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device descriptor describes general information about a device,
the bcdUSB field contains a BCD version number. The version 3.2 is
represented with value of 0x320H. Add the missed BCD version in the
bcdUSB case statement. And modify the return value of address device
command in case create device failed.
Tracked-On: #5712
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix compilation issue when using gcc 10.x due to the "__packed"
attribute in acpi.h. Explicitly changing that to __attribute__((packed))
fixes the compilation error.
Tracked-On: #5671
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rong Liu