The pci_reg 0x30 of PCI config_space is used to check whether the PCI rom
bar is supported. When the PCI rom is supported for the device in guest vm,
the 0x30 pci_reg is emulated and it can return the addr/enable bit.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
PCI ROM is the firmware specific to PCI device and it is provided by
the device vendor. The PCI rom resides in 0x30 offset of PCI config space.
This can be used to check whether the PCI rom exists. And when it exists,
it can load the firmware from the addr that is obtained from ROM bar addr.
For the user-vm, it will try to load the rom_file for the given PCI device and
enable the VM to access the firmware that is defined in rom_file.
BTW: The emulated rom_file is converted from efi image by using EfiRom. It has
no dependency on the ROM bar of physical PCI devices. Of course if the physical
PCI devices supports the ROM bar, the rom_file can also be dumped from the PCI
rom.
Now this is limited to PCI display device.
V2->V3: Add the function of pci_load_rombar/pci_release_rombar to handle the
rombar in course of passthrough_init/deinit.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Now the device model only supports the 0..5 PCI bar for PCI/PCIE devices.
This tries to allocate the PCI_MEM32 resource for PCI ROM bar.
V1->V2: Use the PCI_ROMBAR as bar index and PCIBAR_ROM bar type when calling
the pci_emul_alloc_bar to allocate the guest physical addr for PCI ROM bar.
And it will allocate the resource from PCIBAR_MEM32 region.
V2->V3: Add more comments that describes the parameter of pci_emul_alloc_bar.
Tracked-On: #8175
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Fix the bug in iothread handler, the event should be read out so that the
next epoll_wait not return directly as the fd can still readable.
Tracked-On: #8181
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Because of the iteration of i as is, the condition i <= XHCI_MAX_DEVS
always results as true and thus is unnecessary.
When compiling with cflag -Werror this condition will result in a
compilation failure.
Tracked-On: #8114
Signed-off-by: Marius Rodi <marius.rodi@linutronix.de>
Change virtio-i2c from legacy to modern device according to virtio spec v1.2.
Tracked-On: #8055
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When no geometry parameter is passed for virtio-gpu, it should not be started.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
When multi-display window is initialied/configured, it should report the correct number
to virtio-gpu devides so that it can notify that the Guest_VM can use multi-display.
Otherwise the Guest VM still gets only one display.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
When virtio-gpu is used for guest_vm, ACRN uses the libSDL API to render the framebuffer
submitted from guest virtio-gpu device. The libSDL will cache some op/states related with
3D internally and skip some 3D API. This works well for one display. When multi displays
are enabled, ACRN will create one SDL_Renderer/SDL_window for each display_window.
As the libSDL caches some states, it can't select the correct 3D shader and show
the garbage when switching among multi SDL_Renderer.
This is one limitation in libSDL.
So one small texture(32x32) is created and rendered so that each time it can reconfigure
the internal state for target texture. This is used to workaround the display issue.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Allow one VM have more than 1 virtual display for output. Till now, the
max virtual display number is 2. So guest VM can use dual display for
mirror and extend desktop mode. To specify multi-vdisplay, need use
acrn-dm parameters like this:
For fullscreen mode:
virtio-gpu,geometry=fullscreen:monitor_id1,geometry=fullscreen:monitor_id2
For window mode:
virtio-gpu,geometry=<width>x<height>+<x_off>+<y_off>,geometry=<width>x<height>+<x_off>+<y_off>
v1->v2: add pscreen_id outputs for easier debugging.
Tracked-On: #7988
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Add new concept "vscreen" to abstract all specs about screen in a
display server. This can provide convenience to add more screens
for one VM.
v1->v2: remove vscr NULL checks.
v2->v3: restore vscreen geometry calibaration to previous version.
wrap geometry calibaration and create window/render to
functions.
Tracked-On: #7988
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
vdisplay use physical monitor id(pscreen index) to locate the monitor.
The max index value always is the physical monitor number - 1. For
example, there are 4 physical monitors connected. The monitor id should
be 0, 1, 2 and 3. We need check monitor id that user inputs and make
sure it is in a correct range.
Tracked-On: #7988
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
To support full screen mode on one of multi-local-mornitor which
connected to service vm by monitor ID that customer specify. The
monitor ID is specified in acrn-dm's parameter like this:
virtio-gpu,geometry=fullscreen:monitor_id
For window mode, the vdisplay window always be shown on monitor 0,
because the customer can drag the window to anyone monitor. Besides, the
customer can set the monitor by x_off and y_off parameter like this:
virtio-gpu,geometry=<width>x<height>+<x_off>+<y_off>
v1->v2: Add note about zoom to pscreen width & height in fullscreen.
v2->v3: vdpy.width/height for window, used in host, vdpy.guest_width/
guest_height for guest framebuffer, used in guest.
Tracked-On: #7988
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Return the parsed scanout_num to guest_vm so that the guest_vm can configure multi-display.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Sometimes the virtio_gpu in guest_vm doesn't pass the zero coord_x/y for the
displayed framebuffer. In such case the offset should be calibrated for pixman_image/dmabuf
so that it can display the image from the correct image.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The virtio-gpu display will be handled by the below cmd sequence:
1. Virtio_GPU_CMD_CREATE_RESOURCE
2. VIRTIO_GPU_CMD_SET_SCANOUT/SET_SCANOUT_BLOB
3. VIRTIO_GPU_CMD_FLUSH
And the VIRTIO_GPU_CMD_FLUSH will notify the vdisplay module to display the
framebuffer related with the scanout_id. But the virtio_gpu_cmd_flush doesn't
pass the scanout info.Instead it only passes the flushed_region and the
resource_id. So it needs to check whether the scanout_region is covered by the
flushed_region and then decide whether the scanout_win needs to be displayed.
v1->v2: Use the bpp instead of hardcode 4 for offset_calculation
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The virtio-gpu in guest_vm also passes the scanout_id for cursor operation.
So this scanout_id should be used in course of handling cursor operation.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The scanout_id is included in the below virtio-gpu cmd request.
VIRTIO_GPU_GET_EDID
VIRTIO_GPU_SET_SCANOUT
VIRTIO_GPU_SET_SCANOUT_BLOB
VIRTIO_GPU_GET_DISPLAY_INFO
So the scanout_id and scanout_rect should be handled correctly. And it will
use the scanout_rect instead of resource width/height in course of handling
VIRTIO_GPU_SET_SCANOUT/SCANOUT_BLOB cmd.
v1->v2: change the position to zero when returning response for GET_DISPLAY_INFO
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Now it only supports one scanout for virtio-gpu. So the scanout_id is ignored in
course of handling virtio-gpu cmd. In order to handle the virtio-gpu cmd correctly,
it adds the virtio_gpu_scanout structure so that it can record the scanout info.
v1->v2: Refine the field in virtio_gpu_scanout and error message for scanout_id
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Vdisplay module will create the gui_window (vScreen) based on the virtio-gpu
parameter. When virtio-gpu device tries to establish the connection with
vdisplay module, it will return the supported number of vScreen.
Then the virtio-gpu device can initialize the correct info for the guest_vm.
BTW: The number is fixed to 1.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Currenly it can support only one display_win. When virtio-gpu wants to display
the framebuffer from Guest_vm, it will render it into the default win. In order
to support multi-window, the scanout_id is added for display API.
After display API is refined, the vdisplay and virtio-gpu can support the multi-win
independently.
BTW: Now the scanout_id is not implemented in vdisplay module and the virtio-gpu always
passes the zero. It will be implemeneted in the later patches.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
As the type of pthread_t is unsigned long, so the init value for it
should not be '-1'. When the tid is '-1', it will continue to call
pthread_kill/pthread_join. This is incorrect.
Tracked-On: #7960
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There was some secure coding style violations of virtio net and tmp,
this patch add some NULL check to fix these violations.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
disable NOTIFY during getting requests from virtqueue. This will improve
the IO performance.
Tracked-On: #7940
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add ioeventfd and iothread to virtio framework. When a virtio device
claim to support iothread, virtio framework will register a ioeventfd
and add it to iothread's epoll. After that, the new notify will come
through the iothread instead of the vcpu thread. The notify handler will
be called to process the request.
Tracked-On: #7940
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Supply a decidate thread, which can moniter a set of fds with epoll,
when the data is ready, call the corresponding callback.
This iothread will be created automatically with the first successful
call to iothread_add, and will be destroyed in iothread_deinit if it
was created.
Note, currenlty only support one iothread.
Tracked-On: #7940
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use the VHOST_NET_F_VIRTIO_NET_HDR in linux system header file,
and set the correct feature bit for Virtio net header.
Tracked-On: #7790
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Free the virtio_vsock struct resource in virtio vsock deinit function
in case memory leak.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Replace the exclamation mark with period mark in debug info and fix
the Guest CID max value macro.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
This patch does:
- define IASL_MIN_VER in the top-level Makefile and pass it Device Model
- verify the "iasl" version at run time
if "iasl" version is older than IASL_MIN_VER, refuse to launch the
post-launched VM and exit directly.
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
At run time (on the *target* machine), acrn-dm depends on "iasl" to build
the ACPI tables for post-launched VMs.
This patch does:
- remove the dependency on ASL_COMPILER, which would only be used at build time
- add a new acrn-dm parameter "--iasl <iasl_compiler_path>"
If "--iasl <iasl_compiler_path>" is specified as the acrn-dm parameter,
acrn-dm uses <iasl_compiler_path> as the path to the "iasl" compiler;
otherwise, "which iasl" is used to detect the "iasl" compiler.
If "iasl" is not found at run time, refuse to launch the post-launched VM
and exit directly.
v2 -> v3:
- use "strlen" rather than "strncmp" to check whether asl_compiler
has been set or not
v1 -> v2:
- remove "iasl_param" and "with_iasl_param" to simplify the logic
Tracked-On: #7880
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove sample files and launch scripts related to the Apollo Lake (APL)
platform since ACRN no longer supports it. Clean the Makefile as well to not
install these files on the target system.
Tracked-On: #6175
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix the log format problem in devicemodel when using virtio-console with
'stdio' configuration.
In virtio-console, it will change the STDIO's attributes, and will case
the log message after that not align.
e.g:
for (i=0; i<3; i++)
printf('test\n');
The original output would be like this:
test
test
test
After add 'OPOST' to oflag of STDIO, the output would be like this:
test
test
test
(OPOST - Enable implementation-defined output processing)
Tracked-On: #7860
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The patch fix many bugs about the pci msi capabilities.
1. Fix the clear msi mask bit issues.
2. Initialize the offset of pci capabilities this variable will used as
the output of pci_emul_find_capability function.
3. Replace 16-read with 32-read because both mask and pending are 32bit.
4. Add mask and pending element in msicap struct and intialize the struct
value to zero, because we need r/w mask and pending value.
Tracked-On: #7762
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix the memory leakage issue caused by incomplete deinit flow.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Check max ep index in doorbell write function to avoid overwriting
the pci_xhci_dev_emu->eps[XHCI_MAX_ENDPOINTS].
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
In get_mmio_hpa_resource, although very unlikely, parsing
of /proc/iomem may fail. Handle the case of failure and exit early.
Tracked-On: #7593
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Updates to the TSC members and maintainer list
* Update the Technical Steering Committee (TSC) members following the election
of Junjie Mao as the new chair
* Update Thomas Gleixner's email address since he joined Intel Corporation
* Delete the MAINTAINERS files in the 'hypervisor' and 'devicemodel' folders
as they are obsolete and unused.
Tracked-On: #7706
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Flow Table 6-95 from xHCI spec, Ring Segment Size defines
the number of TRBs supported by the ring segment, valid
values for this field are 16 to 4096.
Tracked-On: #6981
Signed-off-by: Liu Long <long.liu@intel.com>
tfd is one data field of FIS for AHCI, it is unacceptable if it is
random value, could cause AHCI data transport failure.
Acturally there is no chance the switch statement has the value other
than 0~3, since there is only 2 bit to deduce.
Add the initial value for tfd as ATA_S_ERROR, which is checked by
function ahci_write_fis_d2h afterwards, so guest driver could handle it well.
Tracked-On: #7679
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Virtual display is component which based on native window system.
This feature depended phisical monitor connected and graphic driver in
SOS running correctly. If these dependencies fail, it is a fatal error
for virtual display. We have to terminate the device model to let user
fix runtime environment issue for graphics.
Tracked-On: #7672
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
The vsock cid type is u64, redefine the cid type to u64, and use
dm_strtoul API replace dm_strtoi.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Zhao Yakui