vmsix.c originally covers ptdev case but ACRN hypervisor
need to support pure virtual PCI mediator, such as ivshmem
device in this patch set.
For better understanding the code changes from patch
perspective, split the changes to several small patches.
This patch moves most original vmsix code to pci_pt.c
as they're mixed with ptdev specific operations.
The subsequent patches will start the detail abstraction change.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix typo error "--apicdev_pt HID" to pass through a TPM device. Fix it to
"--acpidev_pt HID"
Tracked-On: #5401
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Since now we support direct boot only, we don't have to use FIRMWARE variable
to differentiate between sbl/GRUB and UEFI boot.
After this change:
- "FIRMWARE=sbl/uefi" should be removed from make commands.
- the firmware name is removed from the installed ACRN image. For example,
acrn.apl-up2.sbl.sdc.32.out will be changed to acrn.apl-up2.sdc.32.out.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
update vm configurations for hybrid_rt scenario on WHL/EHL/TGL/CFL
boards, add 1 YaaG and assign 1 more pcpu for WaaG.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
update the help message of config SCENARIO to set 2 standard
post-launched VMs for default hybrid_rt scenario in Kconfig.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
assign 2 CPUs for WaaG and add 1 YaaG on hybrid_rt scenario for
WHL/EHL/TGL/CFL boards.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
P2SB_BAR_ADDR related macros should only be defined in misc_cfg.h only when
p2sb is enabled in scenario xml.
Tracked-On: #5340
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Add configurations code of industry scenario and hybrid_rt scenario for
cfl-k700-i7 board to support build acrn binary from source code directly.
Tracked-On: #5212
Signed-off-by: Victor Sun <victor.sun@intel.com>
Add cfl-k700-i7 hybrid_rt xml to support ACRN hybrid_rt scenario on
cfl-k700-i7 board.
Tracked-On: #5212
Signed-off-by: Victor Sun <victor.sun@intel.com>
There is no default xml for hybrid_rt to to generate the
script of posted launch WaaG.
Tracked-On: #5336
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Fail to launch waag by the script generated by launch config on
hybrid_rt scenario, the get_scenario_uuid function should use the
vmid instad of the uosid to get the correct uuid.
Tracked-On: #5336
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
As a DX improvement in the documentation, include the release version
(or Latest) in the breadcrumb header on every page. This can help
readers know which release version documentation they're using.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As we're removing Clear Linux docs because of removing depriviliged boot
mode support, we can refer folks to the last known version of these docs
in the v2.1 release instead of just throwing a 404 error.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
From V2.2, we use the iasl tool to compile offline
ACPI binary for pre-launched VMs while building ACRN,
so we need to install the iasl tool in the ACRN
building environment. This doc is to describe how
to install the iasl tool and specify the version of
iasl at the chapter Install build tools and dependencies.
Tracked-On: #5350
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Did a partial run of ACRN documents through Acrolinx to catch additional
spelling and grammar fixes missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Tiger Lake and Elkhart Lake processors added to the document as
supported processors but with no recommended platform.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
update config xmls to make ivshmem size in decimal MB at description
and values.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
make ivshmem size configured in decimal and MB in config tool
UI and XMLs to simplify input from users.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We can only call these callbacks when they are not NULL.
Tracked-On: #5342
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add the TSN device in tgl-rvp board XML and configure it to
passthrough to pre-launched VM for hybrid_rt scenario on tgl-rvp.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
move MACRO of IVSHMEM region name to ivshmem_cfg.h and bug fix that
avoids multiple declarations of mem_regions in ivshmem_cfg.h
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The MACRO of IVSHMEM shared region name is relevant to scenario, move
the MACRO from pci_devices.h which should be consistent for different
scenarios to ivshmem_cfg.h which is the configuration for IVSHMEM and
could vary in sceanrios.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This is a bug fix that avoids multiple declarations of mem_regions
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When generate the launch scripts, the pm_by_vuart setting of pm_notify_channel
in launch setting should be according to the config of SOS vuart1.
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Move the function which are used to get available ttysn
from board catalogue to library catalogue
Tracked-On: #5154
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Yonghua Huang