Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
We can only call these callbacks when they are not NULL.
Tracked-On: #5342
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the UPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface instead of printf directly.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in Set TR Dequeue command handle function
to avoid Null pointer exception. Fllow xHCI spec 4.6.10, for Set
TR Dequeue pointer command, when the slot is not enabled the
completion code should be Slot Not Enabled Error.
Tracked-On: #5263
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
According to xHCI Spec 4.10.1 Transfer TRBS chapter, there have three
scenarios shall generate a Transfer Event TRB when transfer TRBS:
1. If upon transfer completion of a TRB the Interrupt On Completion(IOC)
flag is set, the xHC shall generate a Transfer Event TRB.
2. A Short Packet will trigger the generation of a Transfer Event TRB on
the Event Ring if the Interrupt-on-Short (ISP) or Interrupt On Completion
(IOC) flags are set in the TRB that the Short Packet was detected on.
3. The detection of an error during a transfer shall always generate a Transfer
Event, irrespective of whether the Interrupt-on-Short or Interrupt On Completion
(IOC) flags are set in the Transfer TRB.
When an error condition is encountered which requires an endpoint to halt; the xHC
shall stop on the TRB in error, the endpoint shall be halted, and
software shall use a Set TR Dequeue Pointer Command to advance
the Transfer Ring to the next TD.
Tracked-On: #5263
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
This patch is used to create and destroy an ivshmem device which
is emulated in hypervisor.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add create_ivshmem_from_dm and destroy_ivshmem_from_dm for
ivshmem device creation and destruction in dm-land
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add IC_CREATE_DEVICE and IC_DESTROY_DEVICE ioctls to create and
destroy an emulated device in hypervisor
v3: change IC_CREATE_DEVICE and IC_DESTROY_DEVICE to IC_CREATE_HV_VDEV
and IC_DESTROY_HV_VDEV
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extend the max native USB bus number to 5. After IceLake platform, there
has 2 physical xHCI controllers in the SOC which involves 4 USB buses.
Tracked-On: #5172
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
Add xmls/samples folders under misc/vm_configs, and make soft link for
them.
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add Null pointer check in reset and stop endpoint command handle
function to avoid Null pointer exception. Fllow xHCI spec 4.6.8 and
4.6.9, for stop and reset endpoint command, when the slot state is
Disabled the error code should be Slot Not Enabled Error, when the
slot have been enabled by an Enable Slot Command the error code should
be Context State Error.
Tracked-On: #5066
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Long Liu <long.liu@intel.com>
We could add MMIO device pass through by two ways:
a) If the MMIO device only has MMIO regions and no ACPI Table touched, using
"--mmiodev_pt MMIO_regions",
b) If the MMIO device touches ACPI Table, using "--acpidev_pt HID"
Now only support TPM2 MSFT0101 MMIO device pass through through launch script
using "--acpidev_pt MSFT0101". When we want to pass through the TPM2 deivce,
we would not allow to emulate the vTPM2 at the same time. This is becuase
the ACRN-DM emulate the TPM2 as MSFT0101 too. Otherwise, the VM can't boot.
Besides, we could only support one TPM2 device PT and one MMIO device PT.
For TPM2 device PT, the MMIO resources are hard-coded. For the MMIO device PT,
we could pass through the MMIO resources on the cmdline.
ToDo:
1. We may use HID to discover the MMIO regions and ACPI Table instaed of
hard-coded.
2. To identify a MMIO device only by MMIO regions.
3. To allocate virtual MMIO regions in a reserved guest MMIO regions.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add two hypercalls to support MMIO device pass through.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices have no reset mechanisms which cause the device stay
in unknown status during boot/reboot flow. And such unknown status cause
unexpected behaviors in the guest. Except the ordinary reset mechanisms
like FLR, we can utilize enter/exit D3cold as the reset that D3cold will
power gate the entire hardware. But the D3cold is implemented as ACPI
method which has no user interface in the SOS side. But the D3cold is
implemented as ACPI method which has no user interface in the SOS side.
But base on our experience, some devices can utilize D3hot instead of
D3cold. But it is not useful for all PCI devices as the power status
of D3hot is implementation defined.
Provide one new API to program PowerState(D0/D1/D2/D3hot) in PMCSR
register.
Add "d3hot_reset" sub-parameter for passthrough device to enable utilize
enter/exit D3hot flow to implement reset mechanisms.
Tracked-On: #5067
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There has one bug that the pci_xhci_dev_emu objects recorded in
xdev->devices haven't destroy when OVMF transfer to guest OS.
This will cause the the fds of usbfs can't be freed in libusb.
The OVMF xHCI driver needs to disable all enabled slots during
graceful existing flow, but it doesn't.
The USBCMD.HCRST bit is used for xHC reset that will be triggered
in xHCI driver initialization. We can use this chance to clear
all pci_xhci_dev_emu objects
Tracked-On: #4897
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
OpRegion: 8KB(0x2000)
[ OpRegion Header ] Offset: 0x0
[ Mailbox #1: ACPI ] Offset: 0x100
[ Mailbox #2: SWSCI ] Offset: 0x200
[ Mailbox #3: ASLE ] Offset: 0x300
[ Mailbox #4: VBT ] Offset: 0x400
[ Mailbox #5: ASLE EXT ] Offset: 0x1C00
Extended OpRegion: 8KB(0x2000)
[ Raw VBT ] Offset: 0x0
Generally VBT stores in MailBox4 in OpRegion which max size is 6KB.
If VBT larger than 6KB, it will be stored in extended OpRegion which
is neighborhood with legacy OpRegion. In this case, we need to
passthrough extended OpRegion also to support GVT-d feature. The
OpRegion size that we passthrough should be (OpRegion+Extended)=16KB
ASLE.rvda stores the location of VBT.
For OpRegion 2.1+: ASLE.rvda = offset to OpRegion base address
For OpRegion 2.0: ASLE.rvda = physical address
To-do: Add support for OpRegion on some platforms(eg. APL)
Tracked-On: #5029
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Fix XHCI_GET_SLOT macro check slot valid function, when the
slot value is bigger than XHCI_MAX_SLOT set the slot value
to zero.
Tracked-On: #4711
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch does the following,
1. Fix an explicit interface name check for tapX preventing
any other interface name like kata_tap to be setup.
2. Add support for macvtap interface.
3. Identify macvtap vs tap interface and
if it is macvtap, identify character device (/dev/tapXX)
to be used.
Tracked-On: #4945
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some OSes assume the platform must have the IOAPIC. For example:
Linux Kernel allocates IRQ force from GSI (0 if there's no PIC and IOAPIC) on x86.
And it thinks IRQ 0 is an architecture special IRQ, not for device driver. As a
result, the device driver may goes wrong if the allocated IRQ is 0 for RTVM.
This patch expose vIOAPIC to RTVM with LAPIC passthru even though the RTVM can't
use IOAPIC, it servers as a place holder to fullfil the guest assumption.
After vIOAPIC has exposed to guest unconditionally, the 'ready' field could be
removed since we do vIOAPIC initialization for each guest.
Tracked-On: #4691
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hugetlb_lv_max will get wrong value if the HUGETLB_LV2 mount failed.
Once hugetlb_lv_max is wrong, the following code logic messes up.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The way of passing DSM address on TGL is the same with on EHL.
Adding these code to support GVT-d on TGL.
Tracked-On: #5020
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Acked-by: Yu Wang yu1.wang@intel.com
Due to there is no inter-vm communication shared memory management
module, so each acrn-dm will call shm_unlink when VM rebooting/shutdown.
It causes one issue that if one of the two VMs is rebooting/shutdown,
the VM can't communicate with the peer again.
Currently, we don't release the shared memory to fix this issue.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
New option "vmsix_on_msi,<bar_id>" is added to specify the passthrough
device needs vMSI-X emulation based on MSI capability.
If vMSI-X on MSI emulation is needed, a virtual BAR will be allocated.
Also, fix a logic error on when to setup INTx.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From xHCI spec 4.5.3.2, the only command that software is
allowed to issue for the slot in disabled state is the Enable
Slot Command. Drop other commands in command handle function.
Tracked-On: #4711
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Don't hardcode install paths. Instead of hardcoding where binaries are
installed, add variables that installer can override.
Tracked-On: #4864
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
- Add Platform GOP Policy
- Add MemoryFence to AcrnEmuVariableFvbRuntimeDxe
- UefiCpuPkg/CpuExceptionHandlerLib: Fix split lock
- OvmfPkg/SataControllerDxe: Calculate ChannelCount based on PI value
Tracked-On: #4866
Signed-off-by: Peter Fang <peter.fang@intel.com>
- re-arange the code to make static code analysis tool happy.
- If no valid conversion could be performed, a zero value is returned
(0L) from strtol(), so add a sanity check "isdigit(cp[0])" to ensure
that it won't unexpectedly parse CPU 0 if the string starts or ends
with the valid delimiters ',' or '-', for example:
-- cpu_affinity 1,
-- cpu_affinity ,1
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
The shared memory will be created when a post-launched VM which
specified ivshmem v1 device starts, the same shared memory name
will only create a shared memory region.
The shared memory will be removed when all post-launched VMs
that opened it close the shared memory object.
v2: Support one post-launched VM can configure multiple ivshmem
devices
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support shared memory based inter-vm communication for ACRN
post-launched VMs. The ivshmem mediator emulates one standard
PCI device which expose the shared memory region through its BAR2.
The shared memory region is allocated through Linux shm mechanism and
post-launched VM needs to specify the shm name and size as the acrn-dm
parameter, the VMs have same shm name parameter can communicate over
the shared memory.
For first stage, only support shared memory. Consider to support
notification(interrupt) in future.
To add a ivshmem device in device model, the usage as below
-s N,ivshmem,shm_name,shm_size
v2: Implement the ivshmem MMIO registers emulation
v3: Refine code style
Add ivshmem device usage
Refine MMIO register return value
v4: Refine comments
Use logger interfaces to print logs
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Liu Long