Unify the handling of host/guest MSR area in VMCS. Remove the emum value
as the element index when there are a few of MSRs in host/guest area.
Because the index could be changed if one element not used. So, use a
variable to save the index which will be used.
Tracked-On: #6966
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Requirement: in CPU partition VM (RTVM), vtune or perf can be used to
sample hotspot code path to tune the RT performance, It need support
PMU/PEBS (Processor Event Based Sampling). Intel TCC asks for it, too.
It exposes PEBS related capabilities/features and MSRs to CPU
partition VM, like RTVM. PEBS is a part of PMU. Also PEBS needs
DS (Debug Store) feature to support. So DS is exposed too.
Limitation: current it just support PEBS feature in VM level, when CPU
traps to HV, the performance counter will stop. Perf global control
MSR is used to do this work. So, the counters shall be close to native.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Add a flag: GUEST_FLAG_PMU_PASSTHROUGH to indicate if
PMU (Performance Monitor Unit) is passthrough to guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
NMI is used to notify LAPIC-PT RTVM, to kick its CPU into hypervisor.
But NMI could be used by system devices, like PMU (Performance Monitor
Unit). So use INIT signal as the partition CPU notification function, to
replace injecting NMI.
Also remove unused NMI as notification related code.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Now the vept module uses a mixture of nept and vept, it's better to
refine it.
So this patch rename nept to vept and simplify the interface of vept
init module.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
This patch adds ENOTTY and ENOSYS to indicate undefined and obsoleted
request hyercall respectively, and uses ENOTTY as error code for undefined
hypercall instead of EINVAL to consistent with the ACRN kernel's return
value.
Tracked-On: #7029
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now the vept table was allocate dynamically, but the table size of vept
was calculated by the CONFIG_PLATFORM_RAM_SIZE which was predefined by
config tool.
It's not complete change and can't support single binary for different
boards/platforms.
So this patch will replace the CONFIG_PLATFORM_RAM_SIZE and get the
top ram size from hv_E820 interface for vept.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
CONFIG_PLATFORM_RAM_SIZE is predefined by config tool and mmu use it to
calculate the table size and predefine the ppt table.
This patch will change the ppt to allocate dynamically and get the table
size by the hv_e820_ram_size interface which could get the RAM
info on run time and replace the CONFIG_PLATFORM_RAM_SIZE.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The e820 module could get the RAM info on run time, but the RAM size
and MAX address was limited by CONFIG_PLATFORM_RAM_SIZE which was
predefined by config tool.
Current solution can't support single binary for different boards or
platforms and the CONFIG_PLATFORM_RAM_SIZE can't matching the RAM size
if user have not update config tools setting after the device changed.
So this patch remove the CONFIG_PLATFORM_RAM_SIZE and calculate ram
size on run time.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
HC_GET_PLATFORM_INFO hypercall is not supported anymore,
hence to remove related function and data structure definition.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The coding guideline rule C-FN-16 requires that 'Mixed-use of
C code and assembly code in a single function shall not be allowed',
this patch wraps inline assembly to inline functions.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
v1-->v2:
use inline functions for read/write XMM registers
This patch adds an option CONFIG_KEEP_IRQ_DISABLED to hv (default n) and
config-tool so that when this option is 'y', all interrupts in hv root
mode will be permanently disabled.
With this option to be 'y', all interrupts received in root mode will be
handled in external interrupt vmexit after next VM entry. The postpone
latency is negligible. This new configuration is a requirement from x86
TEE's secure/non-secure interrupt flow support. Many race conditions can be
avoided when keeping IRQ off.
v5:
Rename CONFIG_ACRN_KEEP_IRQ_DISABLED to CONFIG_KEEP_IRQ_DISABLED
v4:
Change CPU_IRQ_ENABLE/DISABLE to
CPU_IRQ_ENABLE_ON_CONFIG/DISABLE_ON_CONFIG and guard them using
CONFIG_ACRN_KEEP_IRQ_DISABLED
v3:
CONFIG_ACRN_DISABLE_INTERRUPT -> CONFIG_ACRN_KEEP_IRQ_DISABLED
Add more comment in commit message
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
"idle=halt " should be avoided in REE since we have to
keep the interrupt always masked in root mode.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The TEE_NOTIFICATION_VECTOR can sometimes be confused with TEE's PI
notification vector. So rename it to TEE_FIXED_NONSECURE_VECTOR for
better readability.
No logic change.
v3:
Add more comments in commit message.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Sometimes HV would like to know if there are specific interrupt
pending in vIRR, and clears them if necessary (such as in x86_tee case).
This patch adds two APIs: get_next_pending_intr and clear_pending_intr.
This patch also moves the inline api prio() from
vlapic.c to vlapic.h
v3:
Remove apicv_get_next_pending_intr and apicv_clear_pending_intr
and use vlapic_get_next_pending_intr and vlapic_clear_pending_intr
directly.
v2:
get_pending_intr -> get_next_pending_intr
apicv_basic/advanced_clear_pending_intr -> apicv_clear_pending_intr
apicv_basic/advanced_get_pending_intr -> apicv_get_next_pending_intr
has_pending_intr kept
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch wraps the check of GUEST_FLAG_TEE/REE into functions
is_tee_vm/is_ree_vm for readability. No logic changes.
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The CONFIG_LOG_DESTINATION parameter selects where the logging messages
send to，serial console or memory or npk device MMIO region.
Now we want to remove it and check the loglevel of each channel,close the
output when the loglevel is ZERO.
Tracked-On: #6934
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces stateful VM which represents a VM that has its own
internal state such as a file cache, and adds a check before system
shutdown to make sure that stateless VM does not block system shutdown.
Tracked-On: #6571
Signed-off-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the MACRO(DM_OWNED_GUEST_FLAG_MASK) is generated
by config-tool. It's unnecessary to generate by tool since
it is fixed, the config-tool will remove this MACRO and
move it to vm_config.h
Tracked-On: #6366
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Variable should not have a prefix of '_' per MISRA C standard. The patch
removes the prefix for _ld_ram_start and _ld_ram_end.
Tracked-On: #6885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In previous commit df7ffab441
the CONFIG_HV_RAM_SIZE was removed and the hv_ram_size was calculated in
link script by following formula:
ld_ram_size = _ld_ram_end - _ld_ram_start ;
but _ld_ram_start is a relative address in boot section whereas _ld_ram_end
is a absolute address in global, the mix operation cause hv_ram_size is
incorrect when HV binary is relocated.
The patch fix this issue by getting _ld_ram_start and _ld_ram_end respectively
and calculated at runtime.
Tracked-On: #6885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Secure interrupt (interrupt belongs to TEE) comes
when TEE vcpu is running, the interrupt will be
injected to TEE directly. But when REE vcpu is running
at that time, we need to switch to TEE for handling.
Non-Secure interrupt (interrupt belongs to REE) comes
when REE vcpu is running, the interrupt will be injected
to REE directly. But when TEE vcpu is running at that time,
we need to inject a predefined vector to TEE for notification
and continue to switch back to TEE for running.
To sum up, when secure interrupt comes, switch to TEE
immediately regardless of whether REE is running or not;
when non-Secure interrupt comes and TEE is running,
just notify the TEE and keep it running, TEE will switch
to REE on its own initiative after completing its work.
Tracked-On: projectacrn#6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch implements the following x86_tee hypercalls,
- HC_TEE_VCPU_BOOT_DONE
- HC_SWITCH_EE
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch adds the x86_tee hypercall interfaces.
- HC_TEE_VCPU_BOOT_DONE
This hypercall is used to notify the hypervisor that the TEE VCPU Boot
is done, so that we can sleep the corresponding TEE VCPU. REE will be
started at the last time this hypercall is called by TEE.
- HC_SWITCH_EE
For REE VM, it uses this hypercall to request TEE service.
For TEE VM, it uses this hypercall to switch back to REE
when it completes the REE service.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
TEE is a secure VM which has its own partitioned resources while
REE is a normal VM which owns the rest of platform resources.
The TEE, as a secure world, it can see the memory of the REE
VM, also known as normal world, but not the other way around.
But please note, TEE and REE can only see their own devices.
So this patch does the following things:
1. go through physical e820 table, to ept add all system memory entries.
2. remove hv owned memory.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Given an e820, this API creates an identical memmap for specified
e820 memory type, EPT memory cache type and access right.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Add a configuration to support companion VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Add two VM flags for x86_tee. GUEST_FLAG_TEE for TEE VM,
GUEST_FLAG_REE for normal rich VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Since the UUID is not a *must* set parameter for the standard post-launched
VM which doesn't depend on any static VM configuration. We can remove
the KATA related code from hypervisor as it belongs to such VM type.
v2-->v3:
separate the struce acrn_platform_info change of devicemodel
v1-->v2:
update the subject and commit msg
Tracked-On:#6685
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
With current arch design the UUID is used to identify ACRN VMs,
all VM configurations must be deployed with given UUIDs at build time.
For post-launched VMs, end user must use UUID as acrn-dm parameter
to launch specified user VM. This is not friendly for end users
that they have to look up the pre-configured UUID before launching VM,
and then can only launch the VM which its UUID in the pre-configured UUID
list,otherwise the launch will fail.Another side, VM name is much straight
forward for end user to identify VMs, whereas the VM name defined
in launch script has not been passed to hypervisor VM configuration
so it is not consistent with the VM name when user list VM
in hypervisor shell, this would confuse user a lot.
This patch will resolve these issues by removing UUID as VM identifier
and use VM name instead:
1. Hypervisor will check the VM name duplication during VM creation time
to make sure the VM name is unique.
2. If the VM name passed from acrn-dm matches one of pre-configured
VM configurations, the corresponding VM will be launched,
we call it static configured VM.
If there is no matching found, hypervisor will try to allocate one
unused VM configuration slot for this VM with given VM name and get it
run if VM number does not reach CONFIG_MAX_VM_NUM,
we will call it dynamic configured VM.
3. For dynamic configured VMs, we need a guest flag to identify them
because the VM configuration need to be destroyed
when it is shutdown or creation failed.
v7->v8:
-- rename is_static_vm_configured to is_static_configured_vm
-- only set DM owned guest_flags in hcall_create_vm
-- add check dynamic flag in get_unused_vmid
v6->v7:
-- refine get_vmid_by_name, return the first matching vm_id
-- the GUEST_FLAG_STATIC_VM is added to identify the static or
dynamic VM, the offline tool will set this flag for
all the pre-defined VMs.
-- only clear name field for dynamic VM instead of clear entire
vm_config
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Victor Sun<victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_MAX_IR_ENTRIES and CONFIG_MAX_PT_IRQ_ENTRIES are separate
configuration items, and they can be configured through configuration tool
When the number of PT irq entries are more than IR entries, then some
passthrough devices' irqs may failed to be protected by interrupt
remapping or automatically injected by post-interrupt mechanism.
And it waste memory if the CONFIG_MAX_IR_ENTRIES is larger.
This patch replace the CONFIG_MAX_IR_ENTRIES to MAX_IR_ENTRIES and
enforce it align to CONFIG_PT_IRQ_ENTRIES and round up to > 2^n as the
IRTA_REG spec.This way can enforce all PT irqs works with IR or PI
mechanism.
Tracked-On: #6745
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Commit cbf3825 "hv: Pass-through IA32_TSC_AUX MSR to L1 guest"
lets guest own the physical MSR IA32_TSC_AUX and does not handle this MSR
in the hypervisor.
If multiple vCPUs share the same pCPU, when one vCPU reads MSR IA32_TSC_AUX,
it may get the value set by other vCPUs.
To fix this issue, this patch does:
- initialize the MSR content to 0 for the given vCPU, which is consistent with
the value specified in SDM Vol3 "Table 9-1. IA-32 and Intel 64 Processor
States Following Power-up, Reset, or INIT"
- save/restore the MSR content for the given vCPU during context switch
v1 -> v2:
* According to Table 9-1, the content of IA32_TSC_AUX MSR is unchanged
following INIT, v2 updates the initialization logic so that the content for
vCPU is consistent with SDM.
Tracked-On: #6799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch moves the ssram area in ve820 tab, and reunites the
hpa1_low_part1/2 areas. The ve820 building code is refined.
before:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---hpa1_low_part2--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
after:
|<---low_1M--->|
|<---hpa_low--->|
|<---SSRAM--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
The SSRAM area's address is described in the ACPI's RTCT/PTCT
table. To simplify the SSRAM implementation, SSRAM area was
identical mapped to GPA, and resulted in the divition of hpa_low.
Then the ve820 building logic became too complicated.
Now we managed to edit the guest's RTCT/PTCT table by offline
tools in the former patch, so we can move the guest's SSRAM
area, and reunite the hpa_low areas again.
After doing this, this patch rewrites the ve820 building code
in a much simpler way.
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The ve820 table' hpa1_low area is divided into two parts, which
is making the code too complicated and causing problems. Moving
the entries that divides the hpa1_low could make things easier.
This patch moves the GPU OpRegion to the tail area of 2G,
consecutive to the acpi data/nvs area.
before:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---GPU_OpRegion--->|
|<---hpa1_low_part2--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
after:
|<---low_1M--->|
|<---hpa1_low_part1--->|
|<---SSRAM--->|
|<---hpa1_low_part2--->|
|<---GPU_OpRegion--->|
|<---ACPI DATA--->|
|<---ACPI NVS--->|
---2G---
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The length of the ACPI data entry in ve820 tab was 960K, while the
ACPI file is 1MB. It causes the ACPI file copy failed due to reserved
ACPI regions in ve820 table is not enough when loading pre-launched
VMs. This patch changes ACPI data area to 1MB to fix the problem.
And the ACPI data length was missed when calculating
ENTRY_HPA1_LOW_PART2 length. Fixed here too.
Also adds some refinement to the hard-coded ACPI base/addr definations
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
In previous implementation we leave MAX_EFI_MMAP_ENTRIES in config tool and
let end user to configure it. However it is hard for end user to understand
how to configure it, also it is hard for board_inspector to get this value
automatically because this info is only meaningful during the kernel boot
stage and there is no such info available after boot in Linux toolset.
This patch hardcode the value to 350, and ASSERT if the board need more efi
mmap entries to run ACRN. User could modify the MAX_EFI_MMAP_ENTRIES macro
in case ASSERT occurs in DEBUG stage.
The More size of hv_memdesc[] only consume very little memory, the overhead
is (size * sizeof(struct efi_memory_desc)), i.e. (size * 40) in bytes.
Tracked-On: #6442
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-TY-12 requires that 'all type conversions shall
be explicit'. Especially implicit cases on the signedness of variables
shall be avoided.
This patch either adds explicit type casts or adjust local variable types
to make sure that Booleans, signed and unsigned integers are not used
mixedly.
This patch has no semantic changes.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-TY-02 requires that 'the operands of bit
operations shall be unsigned'. This patch adds explicit casts or literal
suffixes to make explicit the type of values involved in bit operations.
Explicit casts to widen integers before shift operations are also
introduced to make explicit that the variables are expanded BEFORE it is
shifted (which is already so in C99 but implicitly).
This patch has no semantic changes.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-PP-04 requires that 'parentheses shall be used
when referencing a MACRO parameter'. This patch adds parentheses to macro
parameters or expressions that are not yet wrapped properly.
This patch has no sematic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline gule C-FN-09 requires that 'the formal parameter name
of a function shall be consistent'. This patch fixes two places where the
formal parameters are named differently in declarations and
definitions. More specifically, the names in declarations are replaced with
those in definitions.
This patch has no semantic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In lock instruction emulation, we use vcpu_make_request and
signal_event pairs to shoot down/release other vcpus.
However, vcpu_make_request is async and does not guarantee an execution
of wait_event on target vcpu, and we want wait_event to be consistent
with signal_event.
Consider following scenarios:
1, When target vcpu's state has not yet turned to VCPU_RUNNING,
vcpu_make_request on ACRN_REQUEST_SPLIT_LOCK does not make sense, and will
not result in wait_event.
2, When target vcpu is already requested on ACRN_REQUEST_SPLIT_LOCK (i.e., the
corresponding bit in pending_req is set) but not yet handled,
the vcpu_make_request call does not result in wait_event as 1 bit is not
enough to cache multiple requests.
This patch tries to add checks in vcpu_kick_lock_instr_emulation and
vcpu_complete_lock_instr_emulation to resolve these issues.
Tracked-On: #6502
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Implement the write_vcbm() function to handle the
MSR_IA32_type_MASK_n vCBM MSRs write request
Call write_vclosid() to handle MSR_IA32_PQR_ASSOC MSR write request
Several vCAT P2V (physical to virtual) and V2P (virtual to physical)
mappings exist:
struct acrn_vm_config *vm_config = get_vm_config(vm_id)
max_pcbm = vm_config->max_type_pcbm (type: l2 or l3)
mask_shift = ffs64(max_pcbm)
vclosid = vmsr - MSR_IA32_type_MASK_0
pclosid = vm_config->pclosids[vclosid]
pmsr = MSR_IA32_type_MASK_0 + pclosid
pcbm = vcbm << mask_shift
vcbm = pcbm >> mask_shift
Where
MSR_IA32_type_MASK_n: L2 or L3 mask msr address for CLOSIDn, from
0C90H through 0D8FH (inclusive).
max_pcbm: a bitmask that selects all the physical cache ways assigned to the VM
vclosid: virtual CLOSID, always starts from 0
pclosid: corresponding physical CLOSID for a given vclosid
vmsr: virtual msr address, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pmsr: physical msr address
vcbm: virtual CBM, passed to vCAT handlers by the
caller functions rdmsr_vmexit_handler()/wrmsr_vmexit_handler()
pcbm: physical CBM
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Implement the read_vcbm() and read_vclosid() functions to handle the MSR_IA32_PQR_ASSOC
and MSR_IA32_type_MASK_n vCAT MSRs read request.
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Minggui Cao