When connecting three monitors to MRB, we will assign the first one to
SOS and assign remaining ones to UOS.
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Create a new diectory bios in devicemodel
Add vSBL binary in bios directory.
- VSBL.bin: release version of vSBL
- VSBL_debug.bin: debug version of vSBL
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the IPU devices are always enabled. But they don't exist on some
boards. In such case some errors are warned and the system can't be booted.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin FengWei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Enable IOC for android on MRB by default.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vsbl layout has been changed.
Previously, vsbl start from 64bit mode.
This patch changes the vsbl load code according to the
layout change of vSBL.
The new vsbl binary added reset vector support.
It will start from reset vector in real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
For the platform without virtual bootloader, dm will load uos kernel
directly, and hv will set rip according to uos kernel entry.
In current code, uos bsp starts from 64bit mode, so 64bit kernel entry
is used.
This patch series sets uos bsp to protected mode on such platform, so
32bit kernel entry is choosed.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid PTY device symbol link failure due to non-exist directory passed from
parameter. Add check_dir function to check the directory and create it if not
exist.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixes a recent PR #311 that added a new API but the doxygen comments for
one of the parameters didn't match the parameter name.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
* Add Fedora 28 and Ubuntu 18.04 Dockerfile
* Add new build dependencies (for the ACRN tools)
* Change default Fedora version to 28
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This reverts commit 5b1c536eee.
For normal case, we connected two HDMI monitors, one for SOS, another for UOS.
Previously UOS has problem when only see one display, it was the bug of
user space driver, then to work around this issue, submit temp patch to let
UOS see two displays.
From latest info, after switch to use github latest user spce driver in stable
branch, such problem was resolved. Then we need revert previous workaround
patch, otherwise, UOS will show on both HDMI1 and HDMI2.
In virtio_heci struct there have deiniting/pending_reset/resetting
variables. All these variables represent the status of virtio heci devices.
Change them into one enum type variable for vheci status.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch turn on WIFI/BT in launch_UOS.sh based on WIFI BDF on SBL,
which is different from ABL. Still need WIFI/BT driver in Android to
make WIFI/BT passthrough work.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
NHLT table is used by some audio driver for topology data, but current
default audio driver doens't depend on it. Disable it by default due
to possible boot failure with different SOS firmware.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
To send open channel command after opening CBC signal channel successfully.
For the latest IOC firmware, the IOC mediator needs to send open channel command
to activate CBC signal channel. Otherwise, there will be no any signal data will
be received.
The open channel command is forward compatible that it would not impact for
older IOC firmware.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This patch implements scalable xHCI parameter for extended capabilities.
For future supported platform, user can be easy to specify their
platform to emulate corresponding xHCI capabilities.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]:[cap=x]
The old usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
Change-Id: Ie8ba056d57cac9446bcf3f39b342c7ac22245c61
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This patch implements Intel ApolloLake xHCI extended capabilities. It
includes two dual role switch registers for switching shared
USB2&USB3 phys between xHCI and xDCI.
Change-Id: I2533537d8a4224da3cf9b2e7475aab9f65347a4a
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Some xHCI extended capabilities are writable. This patch adds the
writing function for excap.
Change-Id: Ie8b144b47ffa261f97d0461bf97b0c4d312a9333
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Every platform should have their own xHCI specific extended
capabilities, but the current xHCI DM is not scalable for them. This
patch refines related logic to make it scalable.
Current code only support 4 registers(4*32) as basic extended
capabilites. Base on this new implementation, the mmio range from
excapoff to regsend will cover real excap size according to the cap
parameter.
Change-Id: Ic55a4494e090ec255939cdb8f32950e3c8a66082
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
monitor_vm_ops and its helpers is added to allow DM to register operations
, so thant vm manager could trigger the power state changes of VM.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Adapt dm-monitor and acrnctl to use the helper functions and new message
definitions in acrn_mngr.h.
These jobs must be done in one commit to avoid build problems:
1. message transmission and callback registration code are moved
to libacrn-mngr.a, so old functions in dm-monitor could be removed to
make code clean;
2. remove unnecessary monior_msg.h;
3. minor changes to acrnctl accordingly.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The VIRTIO_PCI_CAP_PCI_CFG capability creates an alternative access
method to the common configuration, notification, ISR and device-
specific configuration regions.
To access a device region, the driver writes into the capability
structure (ie. within the PCI configuration space) as follows:
- The driver sets the BAR to access by writing to cap.bar
- The driver sets the size of the access by writing 1, 2 or 4 to
cap.length
- The driver sets the offset within the BAR by writing to cap.offset
At that point, pci_cfg_data will provide a window of size cap.length
into the given cap.bar at offset cap.offset.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Virtio 1.0 introduced several PCIY_VENDOR capabilities. When trying to
write to these capabilities no action is taken so the registers in
the capability of VIRTIO_PCI_CAP_PCI_CFG such as bar, offset and length
remain the default value 0. Later a read or write of pci_cfg_data needs
these information to perform the indirect read or write to the bar
region.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
pci_emul_find_capability can be used to get the offset of a PCI
capability in PCI configuration space.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move rpmb_sim.c and rpmb_backend.c to hw/platform/rpmb/
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
A simulated rpmbfile requires to enable 4MB access by writing
the last byte.
Otherwise, the read operation should be failed if no write
was operated on the address greater than the read address.
Writing the last byte during file creating ensures the whole
4MB address is readable.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fix by a fixed string length and correcting return value
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Android HWC has problem when only see one display, then this is
workaround patch to make Android HDMI2 display normal.
V2: only change AaaG UOS kernel boot arg
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
According to the syntax defined in C99, each struct/union field must have an
identifier. This patch removes unnamed struct/union fields that can be easily
expressed in a C99-compatible way.
Here is a summary of structs/unions removed.
struct vhm_request:
union {
uint32_t type; uint32_t type;
int32_t reserved0[16]; => int32_t reserved0[15];
};
struct vhm_request_buffer:
struct vhm_request_buffer {
union { union vhm_request_buffer {
struct vhm_request ...; => struct vhm_request ...;
int8_t reserved[4096]; int8_t reserved[4096];
} }
}
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
With '--ptdev_no_reset', DM doen not abort but warn when assign PCIe
dev without reset capability.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Check reset method for PCIe dev according to 'reset' in sysfs, which
indicates reset capability, like FLR and secondary bus reset. PCIe dev
without reset capability is refused for passthrough to avoid failure
after UOS reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Support log level options, which could change the related log level
without code change.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
eg: -s 8,xhci,1-2,2-2:log=D
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I44639c7b076d21a40eb8f7b99cea8decc5c13c0c
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-write the xHCI option parse function to support port mapper.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]
eg: -s 8,xhci,1-2,2-2
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I3c8392f7e15580cf768c8c4a619d705411da699d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI de-initialization when the guest
dose shutdown or reboot.
Change-Id: I3dfc1ed1a905b455ef455dff2065e872aa5c1ef8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI port sharing feature, which enable the ability
to assign different native ports to different multi-UOSes. For
example:
1-2,1-2 assigned to UOS-1.
1-1,2-1 assigned to UOS-2.
Change-Id: I899070f7a8a6eb23179e41e7b1f1da24c52482b2
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New USB APIs:
usb_native_is_bus_existed/usb_native_is_port_existed: Check if specific
usb bus or port are valid or not.
usb_native_is_ss_port: Check if the specific port is supper speed usb port.
Change-Id: I9ab54f6e81742321128d6abd5845ef966f0e9f37
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implements the disconnect callback of libusb which will be called once
USB device plug out.
Change-Id: Ic5f072f08a92270e6e5836b49e5066da783af243
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support USB mouse, USB keyboard and USB flash drive by enabling the
USB bulk and interrupt transfer for port mapper.
Change-Id: Ia202729e0cfb26fb44a6b278cf4306f2b0b6fa36
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the port change event related function, it
triggered when USB device be hot plugged in.
Change-Id: I065c1e93779f85f8ee6031960e129b59146e1bb7
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the control transfer for port mapper. With this
patch, USB2.0 device can be enumerated successfully in user OS.
Change-Id: I567bd00ca310d68375acd94a5cc5bcd287665df1
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>