'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The added parse_ptct function will parse native ACPI PTCT table to
acquire information like pSRAM location/size/level and PTCM location,
and save them.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From the VT-d spec 8.3:
If a DRHD structure with INCLUDE_PCI_ALL flag Set is reported for a
Segment, it must be enumerated by BIOS after all other DRHD structures
for the same Segment.
However, some broken BIOS violate the rules. To bring up ACRN with them,
change the ASSERT to a permissive check to unblock the BIOS limitation.
Also, scan the DRHD list to find the one who has INCLUDE_PCI_ALL flag.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Replace dmar_iterate_tbl() by a direct for loop. Handle the
dmar_unit_cnt and handle_one_drhd() of each DRHD in the direct for loop.
Also tune some function definitions to save LOC.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
The dedicated DMAR unit for Intel integrated GPU
shall be available on the physical platform.
So remove the assert and add application constraint
in handle_one_drhd func.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Reviewed-by: Wu Xiangyang <xiangyang.wu@linux.intel.com>
To enable gvt-d,need to allow the GPU IOMMU.
While gvt-d hasn't been enabled on APL yet,
so let APL disable GPU IOMMU.
v2 -> v3:
* let APL platforms disable GPU IOMMU.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
The default PCI mmcfg base is stored in ACPI MCFG table, when
CONFIG_ACPI_PARSE_ENABLED is set, acpi_fixup() function will
parse and fix up the platform mmcfg base in ACRN boot stage;
when it is not set, platform mmcfg base will be initialized to
DEFAULT_PCI_MMCFG_BASE which generated by acrn-config tool;
Please note we will not support platform which has multiple PCI
segment groups.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- remove some unnecessary includes
-- fix a typo
-- remove unnecessary void before launch_vms
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Currently ACPI related defines/structs are scattered across multiple C
source files, move them into acpi.h so that they can be shared and used by
vacpi code (to be added in subsequent commits).
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
move some data structures and APIs related host reset
from vm_reset.c to pm.c, these are not related with guest.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The current implement will trigger shutdown vm request on the BSP VCPU on the VM,
not the VCPU will trap out because triple fault. However, if the BSP VCPU on the VM
is handling another IO emulation, it may overwrite the triple fault IO request on
the vhm_request_buffer in function acrn_insert_request. The atomic operation of
get_vhm_req_state can't guarantee the vhm_request_buffer will not access by another
IO request if it is not running on the corresponding VCPU. So it should trigger
triple fault shutdown VM IO request on the VCPU which trap out because of triple
fault exception.
Besides, rt_vm_pm1a_io_write will do the right thing which we shouldn't do it in
triple_fault_shutdown_vm.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Since ACPI 2.0 a new field has been added to the table, X_FirmwareControl of type GAS,
which is 64bit. So use it conditionally.
Tracked-On: #3198
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
remove some unnecessary includes,
some can cause reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: acpi_parser/acpi_ext.c
modified: acpi_parser/dmar_parse.c
modified: boot/acpi_base.c
modified: boot/guest/direct_boot_info.c
modified: include/arch/x86/per_cpu.h
Handle the PIO reset register that is defined in host ACPI:
Parse host FADT table to get the host reset register info, and emulate
it for Service OS:
- return all '1' for guest reads because the read behavior is not defined
in ACPI.
- ignore guest writes with the reset value to stop it from resetting host;
if guest writes other values, passthru it to hardware in case the reset
register supports other functionalities.
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split acpi.c to acpi_base.c and acpi_ext.c. The former one will
go FuSa and the later one will not;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Keep acpi.h as the only acpi api interface;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The acpi parse code would not go FuSa cert, move acpi parser related code
to a separate folder is helpful on FuSa isolation.
This patch moves dmar parse code;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Yonghua Huang