According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
acrn.efi is a binary and need to be installed to /usr/lib instead of
/usr/share.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Move the platform apl-mrb samples to devicemodel samples directory.
Add the install target to the missing samples files and re-organize the
samples directory structure to have nuc and apl-mrb samples.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
EDK Shell API is not standard API defined by UEFI spec.
The gnu-efi below v3.0 doesn't support EDK Shell API
(for example, GetShellArgcArgv), that leads to the hypervisor
unable to boot up when the host machine is installed with
old gnu-efi.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
That can allow the user to pass the cmdline to hypervisor
from UEFI Shell or BIOS. For example:
Shell> EFI\acrn\acrn.efi bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x91230000
$ sudo efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L \
"ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x91230000"
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove sipi_from_efi_boot_service_exit & efi_deferred_wakeup_pcpu workaround
for uefi boot flow
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the -O0 option is used. In such case the code is not optimized.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
FPU/SSE is not supported in HV. Otherwise it is possible that the
SSE/FPU register is used under -O2 option.
So the gcc option is added to disable them.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now two flags can be used to control the optimizatin option. So unify them
and only one flag can be used to config the optimization
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V3->V4: Updated function/variable names for accurancy
V2->V3: Changed a few function/variable names to make it less confusing
V1->V2: removed the unneccesary cache flushing
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- For other boot, scan E820 to allocate memory in HV run time
- update_trampoline_code_refs() updates all the references that need the
absolute PA with the actual load address
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V1->V2: removed CONFIG_LOW_RAM_START and added ".org 0" to
cpu_secondary.S
The assumption is trampoline code is relocated while HV is not, so:
trampoline code is built at address 0, and CS register is updated
by SIPI to reflect the correct vector
in real mode part, added extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This patch makes the Service OS bootloader configurable by passing
a command-line argument to 'acrn.efi' when setting up the EFI
bootloader using, e.g., 'efibootmgr'. If no argument is passed, the
default bootloader used is: "\EFI\org.clearlinux\bootloaderx64.efi".
This is the default bootloader/setting used by Clearlinux and is set
in the bsp/uefi/include/bsp/bsp_cfg.h file (via the
CONFIG_UEFI_OS_LOADER_NAME define)
The general format of the argument is: "bootloader=<\path\to\bootloader>".
As a concrete example, imagine the following set-up:
* You have installed the Service OS (bare-metal for now)
* Bootloader is "\EFI\org.clearlinux\bootloaderx64.efi"
* Boot device is '/dev/sda'
* EFI System Partition (ESP) is '1'
* You put the ACRN hypervisor under "\EFI\acrn\"
To change the default boot entry to boot the ACRN hypervisor, enter:
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
-L "ACRN Hypervisor" -u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi"
And reboot your machine.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Due to redundant waking up APs When rebooting UOS, the crash occurs
and fail to reboot UOS.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Remove clocksource=hpet from SOS kernel cmdline, as ACRN is providing
tsc and hpet will not be supported in the future
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Since the boot flow had been changed to that sos kernel is lanuched
by cl bootloader directly, replace the payload acrn.efi with bzImage.efi
in the acrn.conf file, and specify ROOTDEV with UUID in the command line.
The UEFI firmware launches the EFI/org.clearlinux/bootloaderx64.efi
as os loader not the EFI/BOOT/BOOTX64.EFI, so fix the issue in the document
ACRN_UEFI.txt which guides user with incorrect steps.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jack, Ren <jack.ren@intel.com>
Previously with the help from gcc, __builtin_return_address(0) is
used as the guest entry address, but it can't work well with gcc 7.3
and leads to the guest unable to return to UEFI correctly.
Let's get it explicitly.
Signed-off-by: Jack Ren <jack.ren@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a FIXME comment that the emalloc() & __emalloc cannot
guarantee to return address under 4G, and the hypervisor
cannot handle params, which address is above 4G, delivered
from efi stub.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Remove the useless function named get_path().
Remove the useless function named print_ch().
Remove the useless function named isspace().
Move the function memory_map() from boot.c to malloc.c
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Save the pointer of efi_ctx in mi_drivers_addr field of
multiboot structure and pass to hypervisor, not by
saving in register RDX(the third default parameter in
64bit call function).
With this method, we can be compatible with the original
32bit boot parameters passing method and no need to
large the array size of boot_regs in hypervisor.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
With current code, the acrn.efi is inserted between
cl bootloader.efi and bzImage.efi that destroyed the chain
relationship of cl bootloader and cl bzImage.efi.
And the following is current boot flow:
UEFI -> cl bootloader.efi -> acrn.efi -> bzImage.efi
The purpose of this patch is resume above chain relationship,
and make uefi vm return to efi stub context once launched,
then continue to call the UEFI API(LoadImage/StartImage) to launch
cl bootloader or other bootloaders. So the boot flow will
change to be as below:
UEFI -> acrn.efi -> cl bootloader.efi -> bzImage.efi
After applying this patch, the code related to loading
bzImage.efi and getting pe_entry is unnecessary due to
the bzImage.efi will not be launched by acrn.efi directly,
so it is removed.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
With current code, memcpy rsdp to 0x500 maybe overwrite uefi
code/data region.
So remove the legacy BIOS deliver method of RSDP, which need copy
the RSDP to EBDA space which is addressed by the 16bit pointer
at 0x40E or upper memory BIOS space 0xe0000-0xfffff. And just
deliver the pointer of RSDP, which is already saved in UEFI system
table, to hypervisor.
Create a function named efi_init() to separate efi initialize code.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
As mentioned in https://github.com/projectacrn/acrn-documentation/pull/38
on some operating systems, the ``gnu-efi`` package installs the
linker under a ``gnuefi`` folder in ``${LIBDIR}``. This is the
case in Fedora for example. Check if the gnuefi folder is there
and use it if it is in the path to the linker. This PR fixes the
Makefile rather than documenting how to edit it yourself.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
this patch save native lapic configuration and restore it to vm0's vlapic
before its running, then doing hpet timer interrupt injection through vlapic
interface -- this will not mess up vlapic and we can see hpet
timer interrupt coming continuously.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
we added uefi stub for hv, and want vm0 continue running under uefi env to
boot other uefi payload (osloader or bzImage).
during this, the uefi timer irq need be handled elegantly.
there are 3 types for uefi timer:
1. 8254 based on IRQ0 of PIC
2. HPET based on IOAPIC
3. HPET based on MSI
currently, we only support type 3 (HPET+MSI). But we are following a
in-correct flow to handle this timer interrupt:
- we set VMX_ENTRY_INT_INFO_FIELD directly if a timer interrupt happened
before vcpu launching, this will make its vlapic mess up, which finally
cause hpet timer stop.
this patch remove this in-correct approach, the new approach patch will
be followed by next patch.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
acrn.efi is an EFI executable image and not a linux kernel image.
This commit changes linux to efi in the boot-loader configuration.
For more reference please review:
https://www.freedesktop.org/wiki/Software/systemd/systemd-boot/
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
The EFI configuration example file is not installed.
This patch adds a rule to install the configuration example file
at /usr/share/acrn
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Currently the acrn EFI hypervisor file is installing directly to
/usr/share. This patch adds a "acrn" directory to store in
/usr/share/acrn
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Zide Chen