When enabling SRIOV capability for a PF in Service VM, ACRN Hypervisor
should add VF BARs mapping for PF since PF's firmware would access these
BARs to do initialization for VFs when it's first created.
Tracked-On: #4433
Signed-off-by: Fei Li <fei1.li@intel.com>
In spite of Table Size in MSI-X Message Control Register [Bits 10:0] masks as
RO (Register bits are read-only and cannot be altered by software), In Spec
PCIe 6.0, Chap 6.1.4.2 MSI-X Configuration "Depending upon system software
policy, system software, device driver software, or each at different times or
environments may configure a Function’s MSI-X Capability and table structures
with suitable vectors."
This patch just pass through MSI-X Control Register field to guest.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-ST-02 requires that 'the loop body shall be
enclosed with brackets', or more specifically, braces. This patch adds
braces to the single-line loop bodies.
This patch has no semantic change.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rule C-FN-06 requires that 'a parameter passed by
value to a function shall not be modified directly'. This patch rewrites
two functions which does modify its parameters today.
This patch has no semantic impact.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename gpa_uos to gpa_user_vm
rename base_gpa_in_uos to base_gpa_in_user_vm
rename UOS_VIRT_PCI_MMCFG_BASE to USER_VM_VIRT_PCI_MMCFG_BASE
rename UOS_VIRT_PCI_MMCFG_START_BUS to USER_VM_VIRT_PCI_MMCFG_START_BUS
rename UOS_VIRT_PCI_MMCFG_END_BUS to USER_VM_VIRT_PCI_MMCFG_END_BUS
rename UOS_VIRT_PCI_MEMBASE32 to USER_VM_VIRT_PCI_MEMBASE32
rename UOS_VIRT_PCI_MEMLIMIT32 to USER_VM_VIRT_PCI_MEMLIMIT32
rename UOS_VIRT_PCI_MEMBASE64 to USER_VM_VIRT_PCI_MEMBASE64
rename UOS_VIRT_PCI_MEMLIMIT64 to USER_VM_VIRT_PCI_MEMLIMIT64
rename UOS in comments message to User VM.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
For the IGD device the opregion addr is returned by reading the 0xFC config of
0:02.0 bdf. And the opregion addr is required by GPU driver.
The opregion_addr should be the GPA addr.
When the IGD is assigned to pre-launched VM, the value in 0xFC of igd_vdev is
programmed into with new GPA addr. In such case the prelaunched VM reads
the value from 0xFC of 0:02.0 vdev.
But for the Service VM, the IGD is initialized by using the same policy as other PCI
devices. We only initialize the vdev_head_conf(0x0-0x3F) by checking the
corresponding pbdf. The remaining pci_config_space will be read by
leveraging the corresponding pdev. But as the above code doesn't handle the
scenario for Service VM, it causes that the Service VM fails to
read the 0xFC config_space for IGD vdev.
Then the i915 GPU driver in SOS has some issues because of incorrect 0xFC
pci_conf_space.
This patch initializes offset 0xfc of CFG space of IGD for Service VM,
it is simple and can cover post-launched VM too.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
But malicious guest may reprogram the PIO bar,
then hv will pass-thru the reprogramed PIO address to guest.
This isn't safe behavior.
When guest tries to reprogram pass-thru dev PIO bar,
inject #GP to guest directly.
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
Then set the VMCS io bitmap to pass-thru the corresponding
port io to guest for performance.
ACRN-DM and acrn-config should ensure the identical mapping of PIO bar.
If ACRN-DM or acrn-config failed to achieve this,
we should deny the launch of VM
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
When pass-thru GPU to pre-launched Linux guest,
need to pass GPU OpRegion to the guest.
Here's the detailed steps:
1. reserve a memory region in ve820 table for GPU OpRegion
2. build EPT mapping for GPU OpRegion to pass-thru OpRegion to guest
3. emulate the pci config register for OpRegion
For the third step, here's detailed description:
The address of OpRegion locates on PCI config space offset 0xFC,
Normal Linux guest won't write this register,
so we can regard this register as read-only.
When guest reads this register, return the emulated value.
When guest writes this register, ignore the operation.
Tracked-On: #6387
Signed-off-by: Liu,Junming <junming.liu@intel.com>
ACRN does not support the variable range vMTRR. The default
memory type of vMTRR is UC. With this vMTRR emulation guest VM
such as Linux refuses to map the MMIO address space as WB. In
order to get better performance SHM BAR of ivshmem is mapped
with PAT ignored and memory type of SHM BAR is fixed to WB.
Tracked-On: #6389
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to PCIe Spec, for a RW register bits, If the optional feature
that is associated with the bits is not implemented, the bits are permitted
to be hardwired to 0b. However Zephyr would use INTx Line Register as writable
even this PCI device has no INTx, so emulate INTx Line Register as writable.
Tracked-On: #6330
Signed-off-by: Fei Li <fei1.li@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
It seems important that passthru device's max payload settings match
the settings on the native device otherwise passthru device may not work.
So we have to set vrp's max payload capacity as native root port
otherwise we may accidentally change passthru device's max payload
since during guest OS's pci device enumeration, pass-thru device will
renegotiate its max payload's setting with vrp.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For a pci BAR, its size aligned bits have fixed to 0(except the memory
type bits, they have another fixed value), they are read-only.
When write ~0U to BAR for sizing, (type_bits | size_mask) is written
into BAR.
So do not need to distinguish between sizing vBAR and programming vBAR.
When write a value to vBAR, always store (value & size_mask | type_bit)
to vfcg.
pci_vdev_read_vbar() is unnecessary, because it is only need to read
vcfg.
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
When guest doing BAR re-programming, we should check whether
the base address of the BAR is valid.This patch does this check by:
1. whether the gpa is located in the responding MMIO window
2. whether the gpa is aligned with the BAR size
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Now we use pci_vdev_update_vbar_base to update vBAR base address when
guest re-programming BAR. For a IO BAR, we would calculate the 32 bits
base address then mask the high 16 bits. However, the mask code would
never be called since the first if condition statement is always true.
This patch fix it by move the unamsk code into the first if condition
statement.
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Create virtual root port through add_vdev hypercall. add_vdev
identifies the virtual device to add by its vendor id and device id, then
call the corresponding function to create virtual device.
-create_vrp(): Find the right virtual root port to create
by its secondary bus number, then initialize the virtual root port.
And finally initialize PTM related configurations.
-destroy_vrp(): nothing to destroy
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Modules that use udelay() should include "delay.h" explicitly.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In VT-d scenario, if MSI interrupt has been enabled,
vCPU writes the content in MSI registers,
and all bits of the content are read-only.
In this case, hypervisor code will call
enable_disable_msi(vdev, false), which will disable MSI.
And there's no chance to call remap_vmsi.
This is wrong behavior, which will result in the disable of MSI.
Tracked-On: #5847
Reviewed-by: Li Fei1 <fei1.li@intel.com>
Signed-off-by: liujunming <junming.liu@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
ivshmem spec says that the size of BAR0 is 256 bytes. Windows
ivshmem driver will check the size of BAR0. It will refuse to
load the ivshmem driver if BAR0 size is not 256.
For post-launched VM hv land ivshmem BARs are allocated by
device model. For pre-launched VM hv land ivshmem BARs are
allocated by acrn-config tool. Both device model and acrn-config
tool should make sure that the BAR base addr are aligned to 4K
at least.
Tracked-On: #5717
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch denies Service VM the access permission to device resources
owned by hypervisor.
HV may own these devices: (1) debug uart pci device for debug version
(2) type 1 pci device if have pre-launched VMs.
Current implementation exposes the mmio/pio resource of HV owned devices
to SOS, should remove them from SOS.
Tracked-On: #5615
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
The commit 'Fix: HV: VM OS failed to assign new address to pci-vuart
BARs' need more reshuffle.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
When wrong BAR address is set for pci-vuart, OS may assign a
new BAR address to it. Pci-vuart BAR can't be reprogrammed,
for its wrong fixed value. That can may because pci_vbar.fixed and
pci_vbar.type has overlap in abstraction, pci_vbar.fixed
has a confusing name, pci_vbar.type has PCIBAR_MEM64HI which is not
really a type of pci BARs.
So replace pci_vbar.type with pci_vbar.is_mem64hi, and change
pci_vbar.fixed to an union type with new name pci_vbar.bar_type.
Tracked-On: #5491
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
While following two styles are both correct, the 2nd one is simpler.
bool is_level_triggered;
1. if (is_level_triggered == true) {...}
2. if (is_level_triggered) {...}
This patch cleans up the style in hypervisor.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Memory BAR of ivshmem device is 64-bit, 2 BAR registers
are used, counting in one 32-bit MMIO bar and and one
32-bit vMSIX table bar, number of bars "nr_bars" shall
be 4 instead of 3.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- fix bug in 'hcall_destroy_vdev()', the availability of
vpci device shall be checked on 'target_vm".
- refine 'vpci_update_one_vbar()' to avoid potential NULL
pointer access.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
cleanup vpci structure when shutdown_vm to avoid use uninitialized data
after reboot.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cteate method for vmcs9900 vdev in hypercalls.
The destroy method of ivshmem is also suitable for other emulated vdev,
move it into hcall_destroy_vdev() for all emulated vdevs
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
if vuart type is pci-vuart, then use MSI interrupt
split vuart_toggle_intr() control flow into vuart_trigger_level_intr() &
trigger_vmcs9900_msix(), because MSI is edge triggered, no deassertion
operation. Only trigger MSI for pci-vuart when assert interrupt.
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
In pre-launched VM the GPA of vmsix BAR which is used for vmsix
over msi is calculated/allocated by acrn-config tool. The GPA
needs to be assigned to vdev when vdev is initialized. The
assignment is only needed for pre-launched VM. For SOS kernel
will reprogram the Bar base when startup. For post-launched VM
the Bar GPA will be assigned by device model via hypercall.
Tracked-On: #5316
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When init_vmsix_on_msi is called during the initialization of a pt
device, the vmsix bar used for vmsix over msi is just created. No
mapping/unmapping is done and pci_vdev_write_vbar should be called
instead of vdev_pt_write_vbar at the time. Currently the Bar mapping
is delayed till OS sizing the Bar. Backup vbar base_gpa to mmio_gpa
is not required here becuase it will be done later when Bar mapping.
Tracked-On: #5316
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch enables doorbell feature for hv-land
ivshmem device to support interrupt notification
between VMs that use inter-VM(ivshmem) devices.
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- write_vmsix_cap_reg(): emulates vmsix cap writes.
write_pt_vmsix_cap_reg(): emulates msix cap write
for PT devices.
- rw_vmsix_table(): emulates vmsix table bar space access.
- vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access only.
- pt_vmsix_handle_table_mmio_access(): emulates the vmsix
bar space access and remap msi entry for PT device if
write operation is executed.
- rename 'init_vmsix()' and 'deinit_vmsix()' to
'init_vmsix_pt()' and 'deinit_vmsix_pt()' respectively,
they're for PT devices only.
- remove below 2 functions,call
'pci_vdev_read_vcfg()' directly in cases they're used.
- 'read_vmsi_cap_reg()'
- 'read_vmsix_cap_reg()'
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Done <eddie.dong@intel.com>
Fei Li