1. Update the rt_industry_ubuntu GSG file from WHL Maxtang to NUC11TNHi5.
2. Update the ACRN-hypervisor branch and ACRN-Kernel version to release_2.5.
3. Update the BIOS setting for NUC11TNHi5.
4. Update the rt-ind-ubun-hw-1.png and rt-ind-ubun-hw-2.png images for NUC11TNHi5;
And add the native-ubuntu-on-NVME-3.png and native-ubuntu-on-SATA-3.png pictures.
5. Update the PCI device IDs and busses in /usr/share/acrn/launch_hard_rt_vm.sh
for this new platform.
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Update the "Enable ACRN Over QEMU/KVM" tutorial:
* Remove the steps explaining how to add the Virtio blk driver
to the Service VM kernel. It is now part of the default
configuration
* Add a note to make it more obvious that the tutorial assumes
that the compilation of ACRN and its kernel is done *inside*
the QEMU VM that will serve as the Service VM for ACRN
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Get and save native root port's max payload in dev cap register in
vrp_config data structure which will be used to configure vrp's max
payload by hv.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
It seems important that passthru device's max payload settings match
the settings on the native device otherwise passthru device may not work.
So we have to set vrp's max payload capacity as native root port
otherwise we may accidentally change passthru device's max payload
since during guest OS's pci device enumeration, pass-thru device will
renegotiate its max payload's setting with vrp.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Refine the guide to set up ivshmem for both hv-land and dm-land usage.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For ramdisk, need to double check the limit of ramdisk GPA when locate
ramdisk load addr;
For SOS kernel load addr, need not to consider position of hypervisor
start and end address since the range has been set to e820 RESERVED.
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. Update the value of the tag MAX_MSIX_TABLE_NUM from 64 to empty
for all scenario xml except ehl-crb-b board.
2. Update the value of the tag MAX_MSIX_TABLE_NUM to 96 for the
scenario xml on the ehl-crb-b board.
Tracked-On: #6186
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Update the value of the tag MAX_PT_IRQ_ENTRIES from 64 to 128
in TGL-RVP scenario xml.
Tracked-On: #6185
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Remove the AlwaysBreakTemplateDeclarations setting in clang-format file
to fix the issue about "make defconfig".
Tracked-On: #6199
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
A vmsix supported passthrough device expects the first unused bar region
for vmsix. Pop the first unused_bar_index in gpa.py instead.
Reference code: init_vmsix_on_msi of hypervisor\dm\vpci\vmsix_on_msi.c
Tracked-On: #6192
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Without this, the GUEST_FLAG_NVMX_ENABLED doesn't show up in the
drop-down list of "guest_flags" in the ACRN config GUI.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
When hypervisor boots, the multiboot modules have been loaded to host space
by bootloader already. The space range of pre-launched VM modules is also
exposed to SOS VM, so SOS VM kernel might pick this range to extract kernel
when KASLR enabled. This would corrupt pre-launched VM modules and result in
pre-launched VM boot fail.
This patch will try to fix this issue. The SOS VM will not be loaded to guest
space until all pre-launched VMs are loaded successfully.
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
We should not hardcode the VM ramdisk load address right after kernel
load address because of two reasons:
1. Per Linux kernel boot protocol, the Kernel need a size of
contiguous memory(i.e. init_size field in zeropage) from
its load address to boot, then the address would overlap
with ramdisk;
2. The hardcoded address could not be ensured as a valid address
in guest e820 table, especially with a huge ramdisk;
Also we should not hardcode the VM kernel load address to its pref_address
which work for non-relocatable kernel only. For a relocatable kernel,
it could run from any valid address where bootloader load to.
The patch will set the VM kernel and ramdisk load address by scanning
guest e820 table with find_space_from_ve820() api:
1. For SOS VM, the ramdisk has been loaded by multiboot bootloader
already so set the load address as module source address,
the relocatable kernel would be relocated to a appropriate address
out space of hypervisor and boot modules to avoid guest memory
copy corruption;
2. For pre-launched VM, the kernel would be loaded to pref_address
first, then ramdisk will be put to a appropriate address out space
of kernel according to guest memory layout and maximum ramdisk
address limit under 4GB;
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The SOS VM should not use host efi memmap directly, since there are some
memory ranges which reserved by hypersior and pre-launched VM should not
be exposed to SOS VM. These memory ranges should be filtered from SOS VM
efi memmap, otherwise it would caused unexpected issues. For example, The
SOS kernel kaslr will try to find the random address for extracted kernel
image in EFI table first. So it's possible that these reserved memory is
picked for extracted kernel image. This will make SOS kernel boot fail.
The patch would create efi memmory map for SOS VM and pass the memory map
info to zeropage for loading SOS VM kernel. The boot service related region
in host efi memmap is also kept for SOS VM so that SOS VM could have full
capability of EFI services as host.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The bootargs module represents a string buffer and there is a NULL char at
the end so its size should not be calculated by strnlen_s(), otherwise the
NULL char will be ignored in gpa copy and result in kernel boot fail;
Tracked-On: #6162
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously the load GPA of LaaG boot params like zeropage/cmdline and
initgdt are all hard-coded, this would bring potential LaaG boot issues.
The patch will try to fix this issue by finding a 32KB load_params memory
block for LaaG to store these guest boot params.
For other guest with raw image, in general only vgdt need to be cared of so
the load_params will be put at 0x800 since it is a common place that most
guests won't touch for entering protected mode.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The API would search ve820 table and return a valid GPA when the requested
size of memory is available in the specified memory range, or return
INVALID_GPA if the requested memory slot is not available;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The memory range of [0xA0000, 0xFFFFF] is a known reserved area for BIOS,
actually Linux kernel would enforce this area to be reserved during its
boot stage. Set this area to usable would cause potential compatibility
issues.
The patch set the range to reserved type to make it consistent with the
real world.
BTW, There should be a EBDA(Entended BIOS DATA Area) with reserved type
exist right before 0xA0000 in real world for non-EFI boot. But given ACRN
has no legacy BIOS emulation, we simply skipped the EBDA in vE820.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Hypervisor use e820_alloc_memory() api to allocate memory for trampoline code
and ept pages, whereas the usable ram in hv_e820 might include efi boot service
region if system boot from uefi environment, this would result in some uefi
service broken in SOS. These boot service region should be filtered from
hv_e820.
This patch will parse the efi memory descriptor entries info from efi memory
map pointer when system boot from uefi environment, and then initialize hv_e820
accordingly, that all efi boot service region would be kept as reserved in
hv_e820.
Please note the original efi memory map could be above 4GB address space,
so the efi memory parsing process must be done after enable_paging().
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
When hypervisor boot from efi environment, the efi memory layout should be
considered as main memory map reference for hypervisor use. This patch add
function that parses the efi memory descriptor entries info from efi memory
map pointer and stores the info into a static hv_memdesc[] array.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
With this patch, the hv_e820 will be initialized after enable paging. This
is because the hv_e820 will be initialized from efi mmap when system boot
from uefi, which the efi mmap could be above 4G space.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The simply rename mi_acpi_rsdp_va in acrn_boot_info struct to acpi_rsdp_va;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch has below changes:
1. rename mi_efi_info to uefi_info in struct acrn_boot_info;
2. remove redundant "efi_" prefix for efi_info struct members;
3. The efi_info structure in acrn_boot_info struct is defined as
same as Linux kernel so the native efi info from boot loader
is passed to SOS zeropage with memcpy() api directly. Now replace
memcpy() with detailed struct member assignment;
4. add boot_from_uefi() api;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Use more generic abi_mmap struct to replace multiboot_mmap struct in
acrn_boot_info;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Use more generic abi_module struct to replace multiboot_module struct in
acrn_boot_info;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The patch has below changes:
1. rename mi_loader_name in acrn_boot_info struct to loader_name;
2. change loader_name type from pointer to array to avoid accessing
original multiboot info region;
3. remove mi_drivers_length and mi_drivers_addr which are never used;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The name of mi_cmdline in acrn_boot_info structure would cause confusion with
mi_cmdline in multiboot_info structure, rename it to cmdline. At the same time,
the data type is changed from pointer to array to avoid accessing the original
multiboot info region which might be used by other software modules.
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add a wrapper API init_acrn_boot_info() so that it could be used to boot
ACRN with any boot protocol;
Another change is change term of multiboot1 to multiboot because there is
no such term officially;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Given the structure in multiboot.h could be used for any boot protocol,
use a more generic name "boot.h" instead;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The mi_flags is not needed any more so remove it from acrn_boot_info struct;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The acrn_multiboot_info structure stores acrn specific boot info and should
not be limited to support multiboot protocol related structure only.
This patch only do below changes:
1. change name of acrn_multiboot_info to acrn_boot_info;
2. change name of mbi to abi because of the change in 1, also the
naming might bring confusion with native multiboot info;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN used to support deprivileged boot mode which do not need multiboot
modules, while direct boot mode need multiboot modules at lease for
service VM bzImage, so ACRN postponed the multiboot modules sanity check
in init_vm_boot_info.
Now deprivileged boot mode was totally removed, so we can do multiboot
module check in sanitize_acrn_multiboot_info().
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The trb pointer may be NULL when get the address from user space, add
the pointer check before use the trb.
Tracked-On: #6172
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update the content about getting board xml from native
enviroment in acrn_configuration_tool.rst and README.
Tracked-On: #6134
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Replace rdstc() and get_tsc_khz() with their architectural agnostic
counterparts cpu_ticks() and cpu_tickrate().
Tracked-On: #5920
Signed-off-by: Yi Liang <yi.liang@intel.com>
Seperate options with simple types with a heading so they don't get
hidden under the previous options that are part of a complex type.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Running ACRN on QEMU" tutorial to be based on ACRN
v2.5 and Ubuntu 20.04.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Co-authored-by: David Kinder <david.b.kinder@intel.com>
return value 'err' of mmio_rb_lookup() being 0 ensures
'entry' is not NULL, hence checking it before 'free(entry)'
is unnecessary.
Tracked-On: #6157
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Kunhui-Li