About the MSI/MSI-X Capability, there're some fields of it would never been changed
once they had been initialized. So it's no need to reset them once the vdev instance
is still used. What need to reset are the fields which would been changed by guest
at runtime.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
will follow this convention for spin lock initialization:
-- for simple global variable locks, use this style:
static spinlock_t xxx_spinlock = {.head = 0U, .tail = 0U,}
-- for the locks inside a data structure, need to call
spinlock_init to initialize.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
replace spinlock_obtain/spinlock_release with spinlock_irqsave_obtain
and spinlock_irqrestore_release to avoid dead lock for vpic module.
this vpic lock may be accessed in ISR context like this path:
dispatch_interrupt->do_softirq->softirq_handlers
->ptirq_softirq->ptirq_handle_intx->vpic_set_irqline
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
hv: hypercall: restrict the condition to assign/deassign a pci device to
a post-launched VM for safety
For the safety of post-launched VMs, pci devices assignments should
occur only when VM is being created (at VM_CREATED STATUS), and pci
devices de-assignment should occur only when VM is being created or
shutdown/reset (at VM_CREATED or VM_PAUSED status)
Tracked-On: #4995
Acked-by: Eddie Done <eddie.dong@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Signed-off-by: Wang Qian <qian1.wang@intel.com>
From the VT-d spec 8.3:
If a DRHD structure with INCLUDE_PCI_ALL flag Set is reported for a
Segment, it must be enumerated by BIOS after all other DRHD structures
for the same Segment.
However, some broken BIOS violate the rules. To bring up ACRN with them,
change the ASSERT to a permissive check to unblock the BIOS limitation.
Also, scan the DRHD list to find the one who has INCLUDE_PCI_ALL flag.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Replace dmar_iterate_tbl() by a direct for loop. Handle the
dmar_unit_cnt and handle_one_drhd() of each DRHD in the direct for loop.
Also tune some function definitions to save LOC.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
According to SDM 10.12.11, we can know this register is dedicated to the
purpose of sending self-IPIs with the intent of enabling a highly
optimized path for sending self-IPIs. Also sending the IPI via the Self
Interrupt Register ensures that interrupt is delivered to the processor
core. Specifically completion of the WRMSR instruction to the SELF IPI
register implies that the interrupt has been logged into the IRR.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently, not all platforms support posted interrupt processing of both
VT-x and VT-d. On EHL, VT-d doesn't support posted interrupt processing.
So in such scenario, is_pi_capable() in vcpu_handle_pi_notification()
will bypass the PIR pending bits check which might cause a self-NV-IPI
lost.
With commit "bf1ff8c98 (hv: Offload syncing PIR to vIRR to processor
hardware)", the syncing PIR to vIRR is postponed and it is handled by a
self-NV-IPI in the following VMEnter. The process looks like,
a) vcpu A accepts a virtual interrupt ->
1) ACRN_REQUEST_EVENT is set
2) corresponding bit in PIR is set
3) Posted Interrupt ON bit is set
b) vcpu A does virtual interrupt injection on resume path due to
the pending ACRN_REQUEST_EVENT ->
1) hypervisor disables host interrupt
2) ACRN_REQUEST_EVENT is cleared
3) a self-NV-IPI is sent via ICR of LAPIC.
4) IRR bit of the self-NV-IPI is set
c) (VM-ENTRY) vcpu A returns into non-root mode
1) host interrupt enable(by HW)
2) posted interrupt processing clears the ON bit, sync PIR to vIRR
3) deliver the virtual interrupt if guest rflags.IF=1
d) (VM-EXIT) vcpu A traps due to a instruction execution (e.g. HLT)
1) host interrupt disable(by HW)
2) hypervisor enable host interrupt
Above illustrates a normal process of the virtual interrupt injection
with cpu PI support. However, a failing case is observed. The failing
case is that the self-NV-IPI from b-3 is not accepted by the core until
a timing between d-1 and d-2. b-4 happening between d-1 and d-2 is
observed by debug trace. So the self-NV-IPI will be handled in root-mode
which cannot do the syncing PIR to vIRR processing. Due to the bug
described in the first paragraph, vcpu_handle_pi_notification() cannot
succeed the virtual interrupt injection request. This patch fix it by
removing the wrong check in vcpu_handle_pi_notification() because
vcpu_handle_pi_notification() only happens on platform with cpu PI
support.
Here are some cost data for sending IPI via LAPIC ICR regsiter.
Normally, the cycles between ICR write and IRR got set is 140~260,
which is not accurate due to the MSR read overhead.
And from b-3 to c is about 560 cycles. So b-4 happens during this
period. But in bad case, b-4 doesn't happen even c is triggered.
The worse case i captured is that ICR write and IRR got set costs more
than 1900 cycles. Now, the best GUESS of the huge cost of IPI via ICR is
the ACPI bus arbitration(refer to SDM 10.6.3, 10.7 and Figure 10-17).
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add fixed issues and known issues in release note.
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds support to configure MBA delay values from
scenario xml files just as it is done for CAT mask. This will
improve user experience when configuring RDT resource mask
values.
Tracked-On: #4943
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We hit following build error when using gcc10:
arch/x86/page.c:240:48: error: array subscript is outside
array bounds of 'struct page[0][1]' [-Werror=array-bounds]
It happens with gcc10 on different Linux distributions.
Regarding the case that ACRN depends on zero length array in
sevaral places, we disable the zero length array warning by
gcc option.
Tracked-On: #4810
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Wrap a function to do guest ept flush. This function doesn't do real EPT flush.
It just make the EPT flush request and do the real flush just before vcpu vmenter.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
-- remove unnecessary lock in pci_mmcfg_read_cfg and
pci_mmcfg_write_cfg since the mmio operation is atomic
if the offest is aligned with 1/2/4 bytes.
-- move pci_is_valid_access to pci.h
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
remove spin lock for micro code update since the guest
operating system will take lock
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The commit 'HV: Config Splitlock Detection to be disable' allows
using CONFIG_ENFORCE_TURNOFF_AC to turn off splitlock #AC. If
CONFIG_ENFORCE_TURNOFF_AC is not set, splitlock #AC should be turn on
Tracked-On: #4962
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Lists inside of a note are displayed properly now, thanks to #4966 so
let's put some back in.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix CSS style for lists inside a note. Previously the first list item
would overlap in the note heading box.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Attempt to replace all the variations of "pass-thru", "pass thru", "pass
through", and "pass-through" to be "passthrough" (except for doc labels
and in code or API uses)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Due to there is no inter-vm communication shared memory management
module, so each acrn-dm will call shm_unlink when VM rebooting/shutdown.
It causes one issue that if one of the two VMs is rebooting/shutdown,
the VM can't communicate with the peer again.
Currently, we don't release the shared memory to fix this issue.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Check bit 48 in IA32_VMX_BASIC MSR, if it is 1, return error, as we only
support Intel 64 architecture.
SDM:
Appendix A.1 BASIC VMX INFORMATION
Bit 48 indicates the width of the physical addresses that may be used for the
VMXON region, each VMCS, anddata structures referenced by pointers in a
VMCS (I/O bitmaps, virtual-APIC page, MSR areas for VMX transitions). If
the bit is 0, these addresses are limited to the processor’s
physical-address width.2 If the bit is 1, these addresses are limited to
32 bits. This bit is always 0 for processors that support Intel 64
architecture.
Tracked-On: #4956
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
We always assume the physical platform has XSAVE, and we always enable
XSAVE at the beginning, so, no need to check the OXSAVE in host.
Tracked-On: #4956
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
As build variants for different board and different scenario growing, users
might make mistake on HV binary distributions. Checking board/scenario info
from log would be the fastest way to know whether the binary matches. Also
it would be of benifit to developers for confirming the correct binary they
are debugging.
Tracked-On: #4946
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: refine pci_find_vdev with hash
1. Refined pci_find_vdev with BDF-hashing for better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: refine pci_lookup_drhd_for_pbdf with hash
1. Added an auxiliary function pci_find_pdev using hash to find pdev
with pbdf, thus pci_lookup_drhd_for_pbdf will have a better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: rename pci_pdev_array to pci_pdevs to make it clearer
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hv parameter could be configured in GRUB menu, currently we support
"uart=" parameter to override uart settings.
The patch also has modifications on tutorial of using_grub.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As a UX improvement, use a separate tab when opening links to external
sites (use the same tab for internal links). Also, use rel=noopener
attribute to improve security when linking to external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>