When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we get cpu feature/capability in boot_cpu_data at boot initialization,
then there no need to get this feature/capability using cpuid again.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update X86_FEATURE_OSXSAVE when enabled and replace is_xsave_supported
with cpu_has_cap(X86_FEATURE_OSXSAVE).
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cpu_has_cap API for cpu feature/capability detect instead of
add get_xxx_cap for each feature/capability detect.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add "-i" in the DM boot command line for booting IOC mediator.
NOTE: currently only ioc_init will be called in the main entry, ioc_deinit
hasn't be called so far. The DM plans to add one virtual devices list inside
of struct vmctx in the near furture, and virtual devices data structure will
add one common deinit callbacks which will be called during VM exits.
Will support ioc_deinit once that patch merged.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add three PTY devices as dummy native channels. They are used for emulating
native lifecycle channel, native signal channel and native OEM raw channel
for IOC debugging.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is used for IOC mediator debugging. Due to IOC message logs are
too much, need to save into one file instead of output stdout directly.
By default, the debug log is disabled.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the signal whitelist feature.
All the signal messages will be discarded if they are not existed in whitelist.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC CBC signal serivces including single signal,
multi-signal and group signal. All of them are used for CAN devices
communication and IOC on-board peripherals control.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC lifecycle virtualization.
In native environment, lifecycle is uesed for SoC system power control,
likes enter/exit S3/S5. So these related messages can not forward directly
between physical IOC and Guest OS, they need to be mapped to VM pause, exit
and launch.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the IOC signal identities and signal group identities,
that will be used by subsequent signal support patches.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Carrier Board Communication(CBC) protocol is a duplex protocol for IOC data
transfer, including physical layer, link layer, address layer and service layer.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator communicates with native IOC HW through several native channels of
CBC protocol. And IOC mediator communicates with virtual UART through one virtual
channel.
This patch implements channel operations including open/close/read/write.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator main functionality is transfer data between native CBC char
devices and virtual UART, it is implemented as full virtualization, Guest
OS can reuse native CBC driver directly.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add Automotive IOC mediator data structure definitions.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Include more doxygen info, flag undocumented material, update
.known_issues matching for known doxygen/sphinx issues
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
add navigation to (manually) maintained list (in conf.py) of versioned
docs, and update generating and publishing processes to be
version-aware.
Adds a file to redirect root references to /latest folder now (since we
can't update the server redirects). Might break some links to pages
within the site from external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current, mevent cleanup path has issue. There are possible
following calling sequence happen when reboot/poweroff UOS:
1. mevent_dispatch() calls mevent_destroy
2. do_close_post calls some virtual device deinit to delete
mevent.
This patch introduce mevent init/deinit to make sure:
1. mevent init
2. mevent_add is called when init virtual device
3. mevent_del is called when deinit virtual device
4. mevent deinit
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Using ebx will truncate the high 32bit part of 64bit virtual address.
So using rbx instead of ebx.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
In the case that the copy sz is 0, it is unnecessary to do copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This is workaround patch to resolve Disti performance issue.
In kernel 4.14, PAT is skipped to initialize if MTRR is not enabled,
while graphics driver need set WC to GGTT memory to accelerate memcpy,
if PAT is not initialized, default PAT register will treat UC- as
uncacheable, which will impact gfx performance. Change PAT default
register value to treat UC- as WC to workaroud this problem.
Revert me when PAT/MTRR strong correlation is removed in kernel.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Switch all the referenced virtual address to physical address
include ept mapping, vmcs field, vmxon, vmclear, and vmptrld.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Before using a node of list, initialize it.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Guest OS rdtsc/rdtscp doesn't trap into hypervisor, so remove them.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if failed to allocate page structure for root_table or context_table,
ASSERT system and return.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
add necessary HPA2HVA/HVA2HPA transition for context_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
add necessary HPA2HVA/HVA2HPA transition for root_table_addr
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Before copy data between guest and host, should convert the GPA
to HVA and do the copy.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
when host mmu got updated, it should invalidate TLB & page-struct cache.
currently, there is no mmu update will be done after any AP start, so the
simplest way(to avoid shootdown) is just do invlpg for BSP.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- change the input param of check_page_table_present from struct map_params
to page_table_type
- check EPT present bits misconfiguration in check_page_table_present
- change var "table_present" to more suitable name "entry_present"
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
check IA32_VMX_EPT_VPID_CAP MSR to see if ept execution only capability
is supported or not
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
cpu_halt actually mean cpu dead in current code, so change it with
more clear name.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
use pcpu_active_bitmap presents which cpu is active
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
For vSBL boot path, we need to mark the memory vSBL is using
as reserved in e820 table. The add_e820_entry is added to
update the e820 table dynamically.
To simplify the code logic, we assume:
- vSBL is put the middle of one entry of default e820 table
- That entry has orignal RAM type in e820 table
- The e820 table has enough space to hold two more new entries.
If there is more complicated case in the future, we could extend
add_e820_entry to handle it.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The region of MPtable/ACPI table/SMBios resides in
0xF0000 ~ 0x100000. They should be marked as RESERVED instead of
RAM type in e820 table.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Devices' de-init process might access some mapped memory space, such as
virtio virtqueues. Access after unmap will cause a fault.
Release the memory map after de-init processes can avoid it. Reading
more code, there are many error handling lost to unmap the memory.
Refined the code to do it.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two build issues:
- add -fno-strict-aliasing to address
error: dereferencing type-punned pointer will break strict-aliasing rules
- initialize tfd to zero to address
error: ‘tfd’ may be used uninitialized in this function
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Remove clocksource=hpet from SOS kernel cmdline, as ACRN is providing
tsc and hpet will not be supported in the future
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Input('vm0_gpa') should be validated when handling
hypercall 'HC_VM_SET_MEMMAP to create EPT for UOS
in 'hcall_set_vm_memmap()' function.
at least 'hpa' range (from 'vm0_gpa') can't overlap
hypervisor memory region.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Yin Fengwei