For Pre-launched VMs, ACRN uses mptable for reporting APIC IDs to guest OS.
In current code, ACRN uses physical LAPIC IDs for vLAPIC IDs.
This patch is to let ACRN use vCPU id for vLAPIC IDs and also report the same
when building mptable. ACRN should still use physical LAPIC IDs for SOS
because host ACPI tables are passthru to SOS.
Tracked-On: #2934
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
ACRN uses CONFIG_PARTITION_MODE macro to compile out CPU_IRQ_ENABLE/DISABLE
APIs. With vector remapping enabled for pre-launched VMs, this is of no use.
And for VMs with LAPIC pass-thru, interrupts stay disabled in vmexit loop
with the help of is_lapic_pt() API.
Tracked-On: #2903
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the MAX supported VM number is defined explicitly for each scenario,
so move this config from Kconfig to VM configuration.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use unified vm_config.c for all scenarios and use MACROs
for each configuration items, then the initialization of vm_configs[]
becomes more complicated when definition of MACROs increase, so change
the coding style that all configurable items could be explicitly shown in
vm_configuration.c to make code more readable.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add, update '@return' and '@retval' statements to the API descriptions related
to vCPU operations.
Tracked-On: #1844
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch mainly does the following:
- Replace prefix RT_VM_ with VIRTUAL_.
- Remove the check of "addr != RT_VM_PM1A_CNT_ADDR" as the handler is specific for this addr.
- Add comments about the meaning of return value.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel SDM Vol3 23.8 says:
The INIT signal is blocked whenever a logical processor is in VMX root operation.
It is not blocked in VMX nonroot operation. Instead, INITs cause VM exits
So, there is no side-effect to send INIT signal regardless of pcpu active status.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
'vector_cnt' is vector count of MSI/MSIX, and it come from 'table_count'
in the the pci_msix struct. 'CONFIG_MAX_MSIX_TABLE_NUM' is the maximum
number of MSI-X tables per device, so 'vector_cnt' must be less then
or equal to 'CONFIG_MAX_MSIX_TABLE_NUM'.
Tracked-On: #2881
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All if . . else if constructs shall be
terminated with an else statement.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com
The pt_dev.c in board folder is replaced by the one in scenarios folder,
so remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit renmaes guest_no in shell_to_sos_console() to vm_id, which is commonly used in ACRN.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
For hv shell commands with vm_id option, need to check it is in the valid range [0, CONFIG_MAX_VM].
This commit checks the input vm_id, if it's not in the valid range, an error message will be given,
and vm_id will be assgined to default 0U.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CLOS is initialized to 0 for each scenarios. User could modify this
configuration in its vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this scenario, hypervisor will run two logical partition VMs.
Please note that the Kconfig of Hypervisor mode will be removed
gradually. In current Kconfig setting, the CONFIG_PARTITION_MODE
is still kept for now for back-compatibility.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use MACROs in pt_dev.c to replace straight-forward BDF numbers. The
pt devices for each VM will be chosen from Board specific PCI devices
list which defined in pci_devices.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When RTVM is trying to poweroff by itself, we use INIT to
kick vCPUs off the non-root mode.
For RTVM, only if vm state equal VM_POWERING_OFF, we take action to pause
the vCPUs with INIT signal. Otherwise, we will reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes make_reschedule_request support for kicking
off vCPU using INIT.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This API is only for kick vcpu out of non-root mode when
RTVM poweroff by itself. And the first caller will soon come
along with the next patch.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We set the vm state as VM_POWERING_OFF when RTVM is trying to poweroff by itself.
We will check it when trying to pause vCPUs of RTVM. Only if vm state equal to
VM_POWERING_OFF, we take action to pause the vCPUs of RTVM. Otherwise, we will
reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
In the cases when more than one CPU has something to print, exception
dump from one CPU is overlapped with other CPU's messages and the final
text that is printed on console is all mixed up and does not make any sense.
Changing printf to pr_err so that the messages are printed one after
the other.
Tracked-On: #2858
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The vm_config in hypervisor restricted VM name size to
MAX_CONFIG_NAME_SIZE (32 bytes). When UOS is launched by DM, the vmname
is passed in as the last optional args, we hope to to copy it to vm_config
in the future. So the size of vmname in DM args should be restricted to
MAX_CONFIG_NAME_SIZE, too. Because MAX_CONFIG_NAME_SIZE will be used by DM,
we move it from vm_config.h to acrn_common.h
We also rename MAX_CONFIG_NAME_SIZE to MAX_VM_OS_NAME_LEN, because it will
be used by another components, should has a clear name.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Since we always enable "Use TPR shadow", so operate on TPR will not
trigger VM exit. So remove these APIs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-organize the code to remove usage of hypervisor.h from
bsp folder, without changing any functionality.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Currently MSR IA32_MISC_ENABLE is passthrough to guest.
However, guest may change the value of this MSR, which will cause issue in hypervisor.
This patch uses VMX MSR store area to isolate the MSR IA32_MISC_ENABLE between guest and host.
TODO:
Some bits of the MSR IA32_MISC_ENABLE is not just per core, but per package.
So need to check if need to prevent guest from setting or clearing these bits that may affect other cores.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Rename the field msr_num to msr_index, which is more accurate,
in struct msr_store_entry.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- for all cases of referring guest bootargs size, replace MEM_2K with
CONFIG_MAX_BOOTARGS_SIZE for better readability.
- remove duplicated MAX_BOOTARGS_SIZE definition from vm_config.h.
Also fix one minor issue in general_sw_loader() which uses copy_to_gpa()
to copy a string. Since copy_to_gpa() makes use of memncpy_s() to do the
job, the size parameter should include the string null ternimator.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the unused seed parsing source files under
hypervisor/boot/sbl and related header files.
Tracked-On: #2724
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Added a struct acrn_vm in firmware.h to remove
a compiler warning.
No change in logic.
Tracked-On: #2830
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Sainath Grandhi