Retrieve dseed from SeedList HOB(Hand-Off-Block).
SBL passes SeedList HOB to ACRN by MBI modules.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Wang Kai <kai.z.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We need know which tlb to flush: ept or vpid.
1. error handle for invept.
it's the same with invvpid error handle.
change its name to compatible with vpid.
2. the macro name for flush ept tlb request.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current implementation, on sbl platform, vm0 bsp
starts from 64bit mode. And hv need to prepare init
page table for it.
In this patch series, on sbl platform, vm0 bsp starts
from non-paging protected mode.
This patch prepares an init gdt for vm0 bsp on sbl
platform.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Translate gva2gpa in different paging modes.
Change the definition of gva2gpa.
- return value for error status
- Add a parameter for error code when paging fault.
Change the definition of vm_gva2gpa.
- return value for error status
- Add a parameter for error code when paing fault.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Use # of paging level to identify paging mode
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implemenation, cr0/cr4 host mask value are set
according to the value from fixed0/fixed1 values of cr0/cr4.
In fact, host mask can be set to the bits, which need to be trapped.
This patch, add code to support exiting long mode in CR0 write handling.
Add some check when modify CR0/CR4.
- CR0_PG, CR0_PE, CR0_WP, CR0_NE are trapped for CR0.
PG, PE are trapped to track vcpu mode switch.
WP is trapped for info of protection when paing walk.
NE is always on bit.
- CR4_PSE, CR4_PAE, CR4_VMXE are trapped for CR4.
PSE, PAE are trapped to track paging mode.
VMXE is always on bit.
- Reserved bits and always off bits are not allow to be set by guest.
If guest try to set these bits when vmexit, a #GP will be injected.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
_Static_assert is supported in C11 standard.
Please see N1570(C11 mannual) 6.4.1.
replace _Static_assert with ASSERT.
Signed-off-by: huihuang shi <huihuang.shi@intel.com>
Hypercall will return errno to SOS (Now is linux kernel).
Let's define this more general.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
vm_attr_name, vm_state_info_privilege & vm_created are not used
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vm_state_info in struct vm_arch is not used, remove it
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest CR3 read/write operations are not trapped.
Remove CR3 handling in cr_access_vmexit_handler.
Also remove unused API vmx_read_cr3.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Move from vmexit.c to vmx.c
Declare the functions in vmx.h
Rename the functions' name with prefix vmx_.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
There are some massages which is not fatal error but should to print
to serial and sbuf(hvlog) at the same time. pr_fatal is for fatal error
massages and it is not good choice for the situation above.
Introduce a new API pr_acrnlog to deal with the situation. And replace the
following printf with pr_acrnlog for massages should be print to sbuf and
serial. Then developers can get those massages on serial and BTM(Boot Time
Measurement) can use acrnlog to get those massages from sbuf.
BTM refers to Boot Time Measurement which will read acrnlog file to get
timestamps of steps we want.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Pointer arithmetic is currently used to calculate the address of a specific
Local Vector Table (LVT) register (except LVT_CMCI) in lapic, since the
registers are continuously placed with fixed padding in between. However each of
these registers are declared as a single uint32_t in struct lapic, resulting
pointer arithmetic on a non-array pointer which violates MISRA C requirements.
This patch refactors struct lapic by converting the LVT registers fields (again
except LVT_CMCI) to an array named lvt. The LVT indices are reordered to reflect
the order of the LVT registers on hardware, and reused to index this lvt array.
The code before and after the changes is semantically equivalent.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
use func vcpu_queue_exception for vcpu_inject_gp and exception_vmexit_handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
add func vcpu_queue_exception to queue exception based on SDM Vol3 Table 6-5,
which may cause #DF or triple fault
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
the pending_intr is not only serving for interrupt but also for different
request including TLB & TMR updating, so change the function & variants
name accordingly.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It is an extension of GCC CPP to:
* allow omitting a variable macro argument entirely, and
* use ## __VA_ARGS__ to remove the the comma before ## __VA_ARGS__ when
__VA_ARGS__ is empty.
The only use of ## _VA_ARGS__ is to define the pr_xxx() macros, with the first
argument being the format string and the rest the to-be-formatted arguments. The
format string is explicitly spelled out because another macro pr_fmt() is used
to add to the format string a prefix which is customizable by defining what
pr_fmt() expands to.
For C99 compliance, this patch changes the pr_xxx() macros in the following
pattern.
- #define pr_fatal(fmt, ...) \
- do_logmsg(LOG_FATAL, pr_fmt(fmt), ## __VA_ARGS__); \
+ #define pr_fatal(...) \
+ do_logmsg(LOG_FATAL, pr_prefix __VA_ARGS__); \
Reference:
* https://gcc.gnu.org/onlinedocs/gcc/Variadic-Macros.html#Variadic-Macros
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the syntax defined in C99, each struct/union field must have an
identifier. This patch adds names to the previously unnamed fields for C99
compatibility.
Here is a summary of the names (marked with a pair of *stars*) added.
struct trusty_mem:
union {
struct {
struct key_info key_info;
struct trusty_startup_param startup_param;
} *data*;
uint8_t page[CPU_PAGE_SIZE];
} first_page;
struct ptdev_remapping_info:
union {
struct ptdev_msi_info msi;
struct ptdev_intx_info intx;
} *ptdev_intr_info*;
union code_segment_descriptor:
uint64_t value;
struct {
union {
...
} low32;
union {
...
} high32;
} *fields*;
similar changes are made to the following structures.
* union data_segment_descriptor,
* union system_segment_descriptor,
* union tss_64_descriptor, and
* union idt_64_descriptor
struct trace_entry:
union {
struct {
uint32_t a, b, c, d;
} *fields_32*;
struct {
uint8_t a1, a2, a3, a4;
uint8_t b1, b2, b3, b4;
uint8_t c1, c2, c3, c4;
uint8_t d1, d2, d3, d4;
} *fields_8*;
struct {
uint64_t e;
uint64_t f;
} *fields_64*;
char str[16];
} *payload*;
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the syntax defined in C99, each struct/union field must have an
identifier. This patch removes unnamed struct/union fields that can be easily
expressed in a C99-compatible way.
Here is a summary of structs/unions removed.
struct vhm_request:
union {
uint32_t type; uint32_t type;
int32_t reserved0[16]; => int32_t reserved0[15];
};
struct vhm_request_buffer:
struct vhm_request_buffer {
union { union vhm_request_buffer {
struct vhm_request ...; => struct vhm_request ...;
int8_t reserved[4096]; int8_t reserved[4096];
} }
}
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
- move vmexit handling into vmexit_handler
- add error handling, failure will inject #GP
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there are data transfer between guest(GPA) & hv(HPA), especially for
hypercall from guest.
guest should make sure these GPAs are address continous, but hv cannot
assure HPAs which mapped to these GPAs are address continous, for example,
after enable hugetlb, a contious GPA range could come from two different
2M pages.
this patch is handling such case by doing gpa page walking during
copy_from_vm & copy_to_vm.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge these two APIs to 'dump_intr_excp_frame'
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename intr_ctx to intr_excp_ctx
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move intr_ctx to irq.h, delete intr_ctx.h
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Macro GEN_CASE in hypervisor is not used. It's just for userspcace tool
acrntrace and we get one copy of it in ./tools/acrntrace/trace_event.h.
So, remove it.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Changes:
1. Move io request related functions from hypercall.c to io_request.c
since they are not hypercalls;
2. Remove acrn_insert_request_nowait() as it is never used;
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename atomic_cmpxchg_int to atomic_cmpxchg
replace atomic_cmpset_long with atomic_cmpxchg64
rename atomic_readandclear_long to atomic_readandclear64
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Qi Yadong