zephyr

History

Torsten Rasmussen 1cccc8a8fe cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>		2021-08-20 09:47:34 +02:00
..
src	…
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _fade-led-sample:

Fade LED
########

Overview
********

This application "fades" a LED using the :ref:`PWM API <pwm_api>`.

The LED starts off increases its brightness until it is fully or nearly fully
on. The brightness then decreases until the LED is off, completing on fade
cycle. Each cycle takes 2.5 seconds, and the cycles repeat forever.

Requirements and Wiring
***********************

This sample has the same requirements and wiring considerations as the
:ref:`pwm-blinky-sample`.

Building and Running
********************

To build and flash this sample for the :ref:`nrf52840dk_nrf52840`:

.. zephyr-app-commands::
   :zephyr-app: samples/basic/fade_led
   :board: nrf52840dk_nrf52840
   :goals: build flash
   :compact:

Change ``nrf52840dk_nrf52840`` appropriately for other supported boards.

After flashing, the sample starts fading the LED as described above. It also
prints information to the board's console.